Table of Contents
You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3′ x 3’ area and start mopping. To finish, use a clean, damp mop to wipe the floor clean.
Can I mop with Pine-Sol?
Mix 1/4 cup of Pine-Sol® Multi-Surface Cleaner with one gallon of warm water. Mop your floor with the mixture. But, first wring out the mop so it’s just damp, not soaking wet. After mopping, rinse your mop in fresh, clean water and wring it out so it’s just damp.
Do you have to rinse Pine-Sol off floors?
A: Yes. Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
Is Pine-Sol safe for floors?
We like using Pine-Sol® Original Pine Multi-Surface Cleaner on hardwood floors. You can also use Pine-Sol® Original Squirt ‘N Mop®. It’s safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.
What is the best thing to use when mopping?
Mild dish soap can work well as a floor cleaner, and since it is so mild, it can be used on most floor types without leaving a residue. Don’t overuse it, though—too much will create a slightly sticky film. Here are two different recipes to try: Mix 1/4 cup mild dish soap and 3 cups warm water.
Which is better Pine-Sol or Fabuloso?
Among them, Pine-Sol was the clear winner, scoring 74 out of 100 point with high marks from removing soap scum, lack of streaking and cleaning heavily soiled surfaces. Fabuloso, by contrast, got horrendous marks on soap scum, streaking and soiled surfaces, but at $2.10 it only costs a third of what Pine-Sol does.
How do you mop a Pine-Sol floor?
Pine-Sol is a gentle cleaner and the best way to clean linoleum floors. Dilute ¼ cup Pine-Sol ® to a gallon of water. Wipe those dirty floors down with the solution using a mop or sponge. Scrub tougher stains and scuffs with full-strength Pine-Sol ® and a scrubbing brush, then rinse with water.
Why does Pine-Sol make my floor sticky?
A common mind-set in the cleaning industry is that the more cleaning chemical the cleaner the floor, but this is not the case! Floor cleaning chemicals are designed to be effective at a specific dilution. The build-up of excess chemical is one of the main reasons why your floor is left feeling sticky or tacky.
Is Pine-Sol toxic to breathe?
Pine SOL isn’t meant for your respiratory system This is due to the corrosive nature of some of the chemicals that make up Pine SOL. The effect these chemicals can have upon inhalation can vary wildly from individual to individual.
What is Pine-Sol Good For?
A favorite household cleaner since the 1920s, Pine-Sol is a multipurpose cleaner made with pine oil. Pine-Sol isn’t corrosive like bleach and also leaves behind a fresh, pine scent. You can use diluted Pine-Sol to clean hardwood, linoleum, tile, counter tops and several other surfaces.
Do flies really hate Pine-Sol?
Flies seem to HATE pine-sol. To make the fly repelling spray, mix the original Pine-Sol with water, at a ratio of 50/50 and put it in a spray bottle. Use to wipe counters or spray on the porch and patio table and furniture to drive the flies away.
How much should I dilute Pine-Sol?
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes. Scrub crevices in counters with grout with an old toothbrush.
Can you mix Pine-Sol and bleach?
Bleach and Pine-Sol: Mixing these two chemicals in large amounts will create chlorine gas and can restrict your breathing.
Does mopping actually clean?
Here’s the thing – mops don’t really clean by any scientific standard. They aren’t even designed to remove unwanted matter. In fact, according the American Society of Microbiology, a brand new microfiber mop removes only about 50 percent of surface bacteria. Then its effectiveness diminishes with each subsequent use.
Can you mop with just water?
It is rarely appropriate to use plain water to clean floors because science has shown that the use of proper diluted chemicals are effective at breaking the sticky bonds that hold oily soils to floors.
What can I put in my mop water to make my house smell good?
You will need lavender oil, a mop, and a pail to make your own floor cleaning solution. Put 12 drops of lavender into a pail with warm water in it and add one cap full of vinegar. You can use the solution to mop your floors.
Can you mix Pine-Sol and Dawn dish soap?
A: No. Pine-Sol® products should not be used on dishes.
Is Lemon Fresh Pine-Sol a disinfectant?
It disinfects and kills 99.9% of germs including Salmonella enterica, Staphlyococcus aureus, and Influenze A virus. You can use Pine-Sol Multi-surface cleaner on hard, nonporous surfaces including floors, sinks, counters, bathtubs, shower stalls, tile and more. That’s the power of Pine-Sol.
What is a good substitute for Pine-Sol?
Distilled Vinegar Common household white vinegar is an effective cleaning substitute for Pine-Sol. Vinegar is nontoxic and since it is acidic, also dissolves stains on hard surfaces. Also, priced at just a few dollars a gallon, vinegar is less expensive than Pine-Sol.
Is Pine-Sol safe for vinyl?
Suggested Cleaning Products for Vinyl Flooring For deep cleaning, choose products carefully. Avoid “mop and wax” cleaners. Pine Sol, Pledge, and Armstrong all make cleaning products specifically for vinyl flooring.
