QA

Washing Machine Making Clicking Noise When Agitating

If it repeatedly makes a weird ticking or clicking noise, there might be something stuck in the washer drain. Inspect the washing machine, the drain, and all pockets of clothing items to make sure there are no coins or other small objects that are getting thrown into the wash.

Why is my Maytag washer making a clicking sound?

Typically, a clicking or clacking noise will only occur at the start of a cycle. Most likely, it is the sound of the lid locking.

Why does my washing machine squeaks when agitating?

These pulleys can accumulate a buildup of grease, rubber compound or dirt that can cause a squealing or thumping sound when the motor is running. If your washer is making this type of sound when agitating, draining or spinning, then you should inspect the pulleys for signs of dirt accumulation or damage.

Why is my GE washer making a grinding noise when agitating?

It’s possible the tub bearing has worn out. In front load washers, you can test the bearing by rotating the washer drum by hand. If you hear a squeaking noise, it’s possible it may just require some lubrication. However, grinding and rubbing noises indicate that the bearing is broken and requires replacement.

Why does my washer click when washing?

The most common reason for a noisy washing machine is that you’ve overloaded the tub or that the clothes in the tub are unevenly distributed. This causes the inner tub of the washing machine to spin unevenly, often hitting against the outer tub and creating the banging noise.

Why is my agitator making noise?

Is Your Washing Machine Making Noise When Agitating? If you’ve got a washing machine making noise when agitating, it could be suffering from failed drum bearings. Other potential sources for noise when the washing machine is agitating could be a failed drive pulley or pulley, which would need to be inspected visually.

Why is my Whirlpool washer making a squeaking noise?

The squeak is due to the tub suspension spring rubbing on the plastic tub. It’s a shoddy design, if you remove the top cover you can put some silicone lubricant or white lithium grease where the spring attaches to the tub, and the squeak will be resolved.

Is it normal for a washer to squeak?

During normal operations, washing machines exhibit several noises, including minor squeaks and grunts, which are part of the normal operations of the washer. Some noises, such as excessive squealing during washing machine operation, are an indication of a larger problem.

Why does my GE washer keep clicking?

When a GE washer lid keeps clicking, it may indicate a locking and unlocking washer. It could also be the rattling of a loose latch piece. Note when you hear the clicking, and check to see if your machine is locking or unlocking when you hear this sound. If it isn’t, you might need to replace your latch.

Why does my washer sound like a jet?

The noise you describe is most likely emitting from the spin bearing that is pressed into the rear half of the outer tub. The bearing is not a replaceable part. The bearing is pressed into the tub during the manufacturing process which means the rear tub assembly will have to be replaced.

Why is my washing machine growling?

If your washing machine makes a loud rumbling or repetitive banging sound, which is particularly bad on a spin cycle, then it is most likely due to loose or worn out drum bearings.

How do I stop my washing machine from knocking?

This is the single most common cause of washer banging sounds that can be quickly fixed by adjusting your laundry. When you fill the washer. make sure to distribute clothing evenly into the drum. Sort light and heavy fabric items so that no items significantly outweigh others in a load.

Is it worth repairing a washing machine?

A relatively new washer may not break down regularly, hence it may be more affordable to repair it. Getting replacement parts for modern machines can be easier than finding components for older models. Washing machine repair is recommended when the repair cost is less than 50 percent of a new machine’s price.

How do I know if my washing machine bearings have gone?

You’ll know that your washing machine bearings have gone if the machine seems louder when you turn it on. If the inner drum is loose, you’ll hear it banging around inside your washer. Your washer may even begin to “walk” out from the wall with the force. This is another symptom of bad bearings.

Can washing machines explode?

And when those safety mechanisms do fail, they generally fail in a safe way, by disabling the machine. But explosions still happen. In rare cases, when the tub breaks loose and the motor is still running, this can cause what looks like an explosion in the laundry room, with washer parts everywhere.

How long do washing machines last?

How long does a washing machine last? A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren. If you use a stacked washer/dryer combo, you may have to replace both if one starts acting up.