QA

Question: What Are The Different Types Of Shower Drains

The Two Main Types of Shower Drains Point Drains. Linear Drains. Three-Piece Drain. One-Piece Drain. Multipiece Shower Drain.

How do I know what type of shower drain I have?

Shower Drain Styles A point drain typically is in the middle of a shower floor, and a linear drain is shaped like a line — long and narrow. If you install a point drain, look for one that’s in the shape of a square.

What kind of shower drain is best?

Almost any linear shower drain is suitable for a wall-to-wall installation (using the extension set). If you want a free in the floor installation with two-sided sloping then the Easy Drain Diamond is your best choice.

Are linear shower drains better?

The most significant change that comes from choosing a linear drain is that you are able to use larger tiles on the shower floor. Many people prefer to accent the shower floor with smaller tiles and make it look different than the rest of the bathroom, so the point drain makes a good choice.

What is the drain in a shower called?

Also called a trough drain, or a trench drain, the linear drain is really a channel built into the floor of the shower to collect water before sending it to the drain outlet.

Are there different size shower drains?

Keep in mind that shower drain assemblies are generally made to fit a 2-inch drainpipe, not the 1 1/2-inch pipe usually found on tubs. A 2-inch pipe is the recommended size because showers have a low threshold for flooding, and a 2-inch pipe helps the water drain faster than does a 1 1/2-inch pipe.

What type of PVC is used for drains?

PVC is made in several different grades: schedules 40 and 80 and chlorinated polyvinyl chloride (CPVC). Their uses are as follows: Schedule 40 is most commonly used for drain-line piping under houses.

Are linear shower drains more expensive?

The linear drain is much more expensive. The center drain with large format tile can be an inverted pyramid design with corner-to-drain cut/grout lines, but those diagonal cut lines can can look awkward when combined with the other (if any) grout lines.

What is a shower P trap?

P-traps are curved pipes installed under showers and drains of all kinds. The P-trap not only directs your waste water out of your home, this essential pipe also keeps small organisms and sewer fumes from entering your living space by providing a powerful barrier.

Should a shower drain be centered?

The shower drain has to be at the lowest point of the shower floor, and so the floor has to slope down toward the drain from all directions. If the drain is in the center of the floor, you’ll have a relatively level space around the drain to stand on.

Where does a linear shower drain go?

As a general rule-of-thumb, linear drains are located at either the back or side wall of where the fixtures are installed, or along the threshold or entrance.

Is a linear drain a good idea?

Linear drains are an enhanced drainage method and they offer a minimalist seamless look to any shower. This remarkable simple way of getting rid of excess water is becoming the fastest-growing segment of luxury plumbing. For an idea to become a usable practical option, it requires choices and variety.

Does a linear drain have to go wall to wall?

“The ideal linear drain installation is wall-to-wall and against the wall,” says Jonathan Brill, President of Infinity Drain. “We strongly suggest this type of installation not only to enhance the function of the shower but protect the integrity of the rest of the bathroom”.

What is a shower diverter?

If you have a shower-tub combination in your bathroom, the shower diverter valve is what allows you to divert the water back and forth between the tub faucet and the showerhead. Though they are typically very simple devices, shower diverters may malfunction and need replacing once in a while.

What is a tile in shower drain?

Tiling around a shower drain often is one of the final phases of tile setting when remodeling a shower. The tile is installed after completion of the walls, curb and shower subfloor. Wrapping the drain with equally sized pieces provides a smooth transition between the tile and drain.

Can a shower drain be 1.5 inches?

Current plumbing codes (IPC as well as MA Plumbing Code 248 CMR 10 for instance) need 1.5 inches to drain for a tub with a shower. The tub can drain at leisure and the shower function when in utilize, with flow-limiting showerheads, fall within the flow rate that a 1.5” drain can handle.

Can a tub and shower share the same drain?

Yes, they will both be using the same drain pipe at somepoint inside or outside of your house. But the the pipes must join well below the level of both items or the pipe must be large enough for the combined flow, otherwise when you put water down one of them, it will flow out of the other!.

Does a shower drain need a vent?

It’s easy to forget, but it’s a vital and required part of any plumbing fixture drain. The vent pipes remove sewer gases while allowing air into the system to help the water drain. Without a vent, your shower won’t drain correctly.