QA

What Are The Factors Affecting Coagulation

I think, following are the key factors that affect coagulation: Type of coagulant, dose of coagulant, characteristics of water such as; type and quantity of suspended matter, temperature, and pH; Time, and mixing methods etc.

How does pH affect coagulation in water treatment?

Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.

What parameters affect coagulation flocculation?

The factors that influence coagulation–flocculation are, among others, temperature, pH, effluent quality, dosage and coagulant type (Nnaji 2012; Jin 2005; Ma et al. 2001). The suspended particles vary considerably in source, composition charge, particle size, shape, and density.

What is the coagulation process?

Coagulation is the chemical water treatment process used to remove solids from water, by manipulating electrostatic charges of particles suspended in water. This process introduces small, highly charged molecules into water to destabilize the charges on particles, colloids, or oily materials in suspension.

How does pH affect coagulation and flocculation?

At varying sample pH values, the coagulation process may suffer from less than optimum ions being formed in solution. The size of the coagulated particles is also affected by pH, which, in turn, determines the density of the flocculated slime and its tendency and rate of settling out.

Why alum is used as coagulant?

When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.

What is the best pH for coagulation?

Each coagulant has a narrow optimum operating pH range. For example, alum tends to work best at a dosed-water pH of 5.8-6.5. If the pH is lower or higher than this optimum, then problems of high residual colour and aluminium or disinfection by-products may occur in the finished water.

Is alum a coagulant?

Alum is one of the most widely used coagulants in the water treatment industry (Benschoten and Edzwald 1990). For water and wastewater treatment, the coagulants used more frequently are the inorganic salts of aluminum.

Is FeCl3 a coagulant?

Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.

What is the difference between flocculant and coagulant?

Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.

What are the 4 steps of coagulation?

1) Constriction of the blood vessel. 2) Formation of a temporary “platelet plug.” 3) Activation of the coagulation cascade. 4) Formation of “fibrin plug” or the final clot.

What is an example of coagulation?

Examples of Coagulation Milk proteins coagulate to thicken the mixture that forms yogurt. Blood platelets coagulate blood to seal a wound. Pectin gels (coagulates) a jam. Gravy coagulates as it cools.

What are the types of coagulation?

Types of coagulation tests Complete blood count (CBC) Your doctor may order a complete blood count (CBC) as part of your routine physical. Factor V assay. This test measures Factor V, a substance involved in clotting. Fibrinogen level. Prothrombin time (PT or PT-INR) Platelet count. Thrombin time. Bleeding time.

What two chemicals are commonly used as water coagulants?

Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.

What is the function of coagulant?

What are coagulants used for? In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.

What is the impact of coagulant dosing on pH?

At a smaller dosage of the coagulant 0.5 mg Al/mg dye the efficiency of coagulation dropped in the whole examined pH range by 20% on average, in comparison with the optimal dosage 1.0 mg Al/mg dye. At higher dosa- ges of the coagulant and pH range between pH 3.5 and 5.0 floes formation was hindered considerably.

What are the side effects of alum?

If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.

Is alum basic or acidic?

Alum is most commonly delivered as a liquid concentration, having a solids level of 8.3% as Al2O3 or about 50% as hydrate. Alum solutions are acidic. For instance, a 1% solution has a pH of around 3.

Is na2so4 a coagulant?

Sodium sulfate is a well-known coagulant for PVA, and it is used in the coagulation bath of PVA before wet spinning of vinylon fibers.

What is the best coagulant?

Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).

What is coagulant mean?

A coagulant is a compound or agent which is added to a vessel to help thicken something. Adding a coagulant such as aluminum sulfate to water permits particles to come together and results in the formation of a flocculent mass. A coagulant is a compound or agent which is added to a vessel to help thicken something.

Why does coagulation consume alkalinity?

Alkalinity is the capacity of the water to neutralize acids, based on the water’s content of carbonate, bicarbonate, hydroxide, borate, silicate, and phosphate. Water with a high alkalinity is preferred for coagulation since it tends to have more positively charged ions to interact with the negatively charged colloids.