Table of Contents
Aluminum sulfate or alum (Al2(SO4)3), ferric chloride (FeCl3) and ferric sulfate (Fe(SO4)3) are the most widely used flocculants [1, 70]. These flocculants have a long history of use in removing colloidal particles from water and wastewater [15, 17].
What is chemical flocculation?
In colloid chemistry, flocculation refers to the process by which fine particulates are caused to clump together into a floc. The floc may then float to the top of the liquid (creaming), settle to the bottom of the liquid (sedimentation), or be readily filtered from the liquid.
How do you make a flocculant solution?
Prepare your coagulant–flocculant solution by adding one quarter teaspoon of alum powder to about three teaspoons of tap water. (You might have to heat the solution in the microwave to get the powder dissolved.) Stir the solution until all the alum powder is dissolved.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
Can we drink water with alum?
For bad breath: Add one gram of alum and a pinch of rock salt to a glass of warm water, stir till they are dissolved, then rinse the mouth with it. Do not drink it: as it can make you nauseous. For bleeding gums, weak teeth, and dental caries: Make a paste of one gram of alum, a pinch of cinnamon and some rock salt.
Does alum remove hair permanently?
Alum has been used as a home remedy for unwanted facial hair removal from ancient times and it works really well and can be effectively used for both face and body hair removal. Alum when rubbed on the skin acts a mild abrasive and helps get rid of facial hair permanently.
What are the side effects of alum?
Side effects of Alum The excessive amount of alum intake may cause breathing difficulty, facial puffiness, pricking sensation & small ulcers on the skin, chest/throat tightness, and burns rarely seen in some cases.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is the main function of flocculants in flocculation process?
5.3. Polymer flocculants can induce flocculation by neutralizing the surface charge of particles or by forming bridges between individual particles. The functional groups should ideally be positively charged to allow for interactions with the negatively charged microalgal cells.
Does alum increase pH?
Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions. It is tempting to say that “the composition is pH-dependent.” However, in the vicinity of pH=4.3 the composition of alum solutions changes a great deal with very little change in pH.
How do you dissolve flocculant?
Bleach or sodium hypochlorite can be used to break down polyacrylamide-based flocculants.
Why do we use flocculation?
4 Flocculation. Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
What chemicals are used in coagulation?
Traditional chemical coagulation uses aluminum and iron coagulants. The most common aluminum coagulants are aluminum sulfate, aluminum chloride, and sodium aluminate. Iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride, and ferric chloride sulfate [4].
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
Can alum kill bacteria?
Alum precipitates the insoluble materials in the water and kills or lowers the total bacterial content of the water.
What can be used as a flocculant?
The following natural products are used as flocculants:
- Chitosan.
- Isinglass.
- Moringa oleifera seeds (Horseradish Tree)
- Gelatin.
- Strychnos potatorum seeds (Nirmali nut tree)
- Guar gum.
- Alginates (brown seaweed extracts)
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
Does alum kill germs in water?
Alum precipitates the insoluble materials in the water and kills or lowers the total bacterial content of the water.
Can we gargle with alum?
However, the saltwater gargle was not as effective at reducing bacteria as the alum mouthwash. Alum, which is potassium aluminum sulfate, is an active ingredient in some medicated mouthwashes. Doctors and dentists often recommend saltwater gargles to help alleviate mouth and throat pain.
What chemicals can be used to replace alum in the coagulation process?
What are some substitutes for alum and ferric chloride? Substitutes include other aluminum and iron salts, like sodium aluminate and ferric sulfate, but these may or may not work.
What is the principle of flocculation?
Coagulation – flocculation is physico-chemical process that facilitates the agglomeration of fine particles (colloids) contained in water to form a floc that can be easily filtered from water. Effluent (waste water) must be treated before it is discharged or before the water is re-used.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
