Table of Contents
You’ll see a list of numbers from 1 to 10 or 20. These are used to set the clutch to deliver a torque range. The higher the number on the collar, the higher the torque and the larger the fastener that can be driven. To adjust your clutch, align the arrow to a lower setting and start driving a screw.
What do numbers on power drill mean?
In simple words, the numbers on your drill refer to how much torque will be applied to a fastener such as a screw. Once that particular torque level is reached, the power drill will stop driving the fastener or turning at all.
What is the torque setting on a drill?
Most of understand speed, it’s how fast the drill rotates the bit. The torque is how much muscle it can apply to that speed. Speed is required to drive the screw, but torque is what allows it to keep going when it needs to fight the stopping force of friction.
What is a good torque for cordless drill?
Newton Metres (Nm) on drills: 4 to 15Nm is fine for all of those smaller screw driver tasks around the home. 15 to 35Nm is a great all-rounder to drill and drive medium sizes screws and hole drilling. 35Nm upward will tackle all of those more serious project with bigger screws and holes.
What do the numbers on top of a drill?
The numbers on a drill driver refer to the amount of torque the drill will apply to a fastener (usually a screw) and once that torque setting is reached, the drill will stop turning/driving the fastener.
What is the best voltage for a cordless drill?
A cordless drill offers high mobility and a wide range of available features. Voltage ratings of 4 to 8 volts are sufficient for light-duty cordless screwdrivers, and drills with 12 to 18 volts will meet most homeowners’ work needs.
How do you read a DeWALT model number?
The model number is usually found at the top left part of the name plate. In this case the model number is DW938. When DeWALT comes out with the first version of a tool, it is usually a Type 0 or a Type 1. (Occasionally the first version will not have a type, but this is rare.).
What are the numbers on my cordless drill?
The numbers on a cordless drill indicate the torque breaking point or rotary power. The higher the number, the greater the force or torque. This feature is very useful. We’ll explain how to adjust the torque or clutch settings on a drill and what the hammer settings on a cordless drill do.
How much torque does a Dewalt drill have?
One drill is rated at 400 in-lbs max and with 0-400/0-1500 RPM speed settings, and another at 380 in-lbs max torque, with 0-550/0-2000 RPM speed settings.
How much torque does a Dewalt 20V drill have?
impact driver, two 20V MAX* lithium ion batteries, charger, and carrying bag. At only 5.1 in. front to back, the impact driver features a high-performance brushless motor that delivers 1700 in-lbs of torque and 3 LEDs for optimum illumination as you work.
How do I choose my drill speed?
Quick Summary: Some approximate starting advice is to set the spindle speed between 700-1000 rpms for steel, above 2000 for aluminum, and slow down from there if you get discolored chips or heavy drill bit wear.
Are cordless drills worth it?
However, Cordless drills make a tremendous replacement for a hand-powered screwdriver and are more than capable of doing smaller jobs on-site or are often used for DIY around jobs around the house.
What makes a drill more powerful?
Cordless drill power is measured in volts. The higher the voltage rating is, the more powerful the drill. Battery sizes typically range from 12V to 20V.
What is the clutch on a drill?
These days, manufacturers provide a clutch on cordless drill/drivers with numeric settings on the collar. Its purpose is to disengage the transmission at a range of torque thresholds to prevent overdriving screws in delicate surfaces such as drywall, or damaging small or fragile screws.
What is drill chuck?
Drill chucks are devices used to hold a drill or other cutting tools on a spindle. They are available in keyed, keyless or hybrid systems, allowing for quick changes of a drill bit. Keyed chucks are engineered to either loosen or tighten the hold on a tool by using a key.
What is hammer drill used for?
A hammer drill delivers more power in the form of a hammering action. The force of the hammer drill is applied directly to the bit. They are most commonly used for drilling in concrete and masonry. The hammering portion of this motion can be turned off, allowing the tool to function more like a standard drill.
What’s the difference between 12V and 18V drill?
18V vs 12V Run-Time Would you rather have the 12-volt drill or an 18-volt model? It depends. Given the same task, 18-volt batteries are going to run much longer than 12-volt. In exchange, they can also drive heavier loads without slowing down or taxing the battery as much.
What does brushless mean on a drill?
A drill with a brushless motor adjusts its speed, torque, and power supply to match the task at hand. It’ll sense if you’re driving screws into a light material like drywall or a dense material like mahogany, and use only enough power to accomplish the job.
