Table of Contents
A fireback is a cast iron object that can be placed behind a stove to help protect a wall. Firebacks are also very decorative features that can help to enhance the look of your stove.
Do you need wall protection for wood stove?
Protection must be provided for combustible wall, ceiling, and floor materials near the stove and stovepipe as well as where the stovepipe passes through or near combustible walls, ceilings, and other materials.
Is drywall OK behind a wood stove?
Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.
What kind of board do you put behind a wood stove?
Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.
Can you use cement board behind a wood stove?
A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6″ from each side and minimum 16″ from the front face of the stove and minimum 6″ (or the rear clearance to combustibles Oct 1, 2011.
Can I vent a wood stove through the wall?
Venting is an important component of all stoves. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.
What is considered a non-combustible wall?
While wall ‘coverings’ are frequently non-combustible — like tile, brick, stone, metal — the underlying structure often contains wood, paper faced drywall or insulation, and other materials that could catch fire if enough heat were to be transmitted through the ‘non-combustible’ wall covering.
What is the best material to put behind a wood stove?
Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room. The NASD explains that any area within 36 inches of the stove in all directions should be covered.
What material do you put behind a stove?
Granite, stone and other natural or composite materials are also commonly used in backsplashes, whether in tile form or as larger pieces. These higher-end materials will mean an increase in budget, but also a stunning and long-lasting stove backsplash. Stainless steel is another popular option for stove backsplashes.
Can you put ceramic tile behind a wood stove?
ANSWER – Ceramic tile behind a woodstove works very well as long as it’s installed correctly over the right type of substrate. Make sure you use a cementitious adhesive such as a thin-set mortar adhesive for bonding the tile to the substrate and not mastic.
What can be used as a heat shield?
In the past, heat shields have usually been made out of aluminized steel. However, nowadays aluminium sheets and foils are generally used, often combined with ceramic thermal barrier coatings or mats of insulating materials.
Can durock be used as a heat shield?
Strong, durable and resistant to water damage, DUROCK® Next Gen Cement Board is ideal for use in partitions, walls, floors and ceilings in residential construction and can be used as a heat shield. Water, Mould and Moisture Resistant.
What is the wall behind a fireplace called?
The fireplace mantel or mantelpiece, also known as a chimneypiece, originated in medieval times as a hood that projected over a fire grate to catch the smoke. The term has evolved to include the decorative framework around the fireplace, and can include elaborate designs extending to the ceiling.
Is cement board considered non combustible?
Yes, HardieBacker® 1/4″ Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace.
How close can a wood stove be to a tiled wall?
If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall. This distance may be reduced considerably if asbestos millboard and/or 28 gage sheet metal is used for wall protection.
How far should a wood heater be from the wall?
Each model is assessed differently and you need to refer to the manufacturers instruction. However, the standard wood heater distance from the rear wall is around 300mm and the side walls 500mm.
What is the 2 10 rule?
This rule means that they must extend 3 feet above the roof penetration on the shortest side, and the top of the chimney must be 2 feet higher than any portion of the building structure within 10 feet.
Does a wood burning stove need an air vent?
To operate correctly all stoves require a supply of air for combustion, and the ability to then evacuate the flue gases; otherwise they will not work. A wood burner is unable to light without an air supply, and subsequently smoke will then pour out into the room it is installed, not what you want to happen.
How many bends can a flue have?
There must be no bends greater than 45 degrees and there must be no more than four bends in the chimney. If you are using four bends then you must have a soot door between the second and third bend (Building Regs).
At what temperature will Drywall ignite?
Drywall/Gypsum wallboard (GWB) is an accepted fire barrier; however, it is also a huge fuel source for the first few minutes of exposure to a fire or even temperatures higher than 451 Fahrenheit.
What materials are considered non-combustible?
when exposed to fire or heat. Examples of non-combustible materials include steel, masonry, ceramics and certain insulating materials (such as fiberglass or mineral wool insulation). Gypsum wallboard is considered by the codes to be non-combustible although it does have a thick paper backing that is combustible.
