QA

Question: What Does A Hard Start Kit Do

A hard start kit is a start capacitor and a potential relay or PTC ( positive temperature coefficient ) device. They are designed to give your air conditioning compressor an electrical boost upon startup.

Can Hard Start Kit damage compressor?

With the Hard-Start Kit still connected, this will allow the compressor to start and run without the motor-run capacitor. The compressor was not designed to run without the motor-run capacitor, and it will overheat and lead to compressor failure.

How much does it cost to install a hard start kit?

How much does it cost to install a hard start kit? If you decide that installing a hard start kit isn’t something you can comfortably do, then you will need to hire an HVAC technician to do the work. On average you can expect to pay between $100-$175 for the labor to install the hard start kit.

Does a hard start kit save money?

The hard start kit will shorten the start-up period of the compressor. It allows the compressor to start up quickly and use less power during the process of powering up your unit. Ultimately it will let you save money on your energy bill. You’re A/C may start upwards of 6,000 times in a single cooling season.

What is the purpose of a hard start capacitor?

A hard start kit is a capacitor that adds the starting torque and some means of removing the capacitor from the start circuit as soon as the compressor has started. The compressor manufacturer or OEM will almost always use a potential starting relay for this purpose.

How long will a hard start kit last?

The AC has Short Period of Operation Before Shutting Off A customary cooling cycle should last around 15-20 minutes, depending on how warm it is outside and whether you have a single-stage or variable-speed HVAC system.

Does a hard start kit void warranty?

Field installed Hard Start kits are considered accessory items, and should be purchased as such. Therefore, attached is a start capacitor and start relay cross-reference chart as they pertain to Copeland compressors. The specifications for these kits is attached. Use of these kits will NOT void any Goodman warranties.

Does my AC unit need a hard start kit?

Anyone who owns an air conditioner should get a hard start kit because using them will allow the compressor to start up in as little time as possible in the inrush amperage mode. The quick startup will extend the life of your AC units compressor and allow the unit to start more efficiently.

Do I need a compressor saver?

With most systems, the compressor starts under a heavy load. The outdoor unit draws such high amperage that it actually spikes your electricity bill with each start. A compressor saver not only helps lower your electricity bill, it will lengthen the life of your compressor overall.

What is a soft start kit for air conditioner?

An electronic soft starter is designed to reduce the starting current of the compressor by actively controlling the current in both the run and start windings. Soft starters also offer built-in features to protect the compressor under atypical circumstances.

What happens if you oversize a capacitor?

The higher the MFD of the capacitor, the greater the stored energy and the greater the start winding amperage. This is why oversizing a capacitor can quickly cause damage to a compressor. By increasing the current on the start winding the compressor start winding will be much more prone to early failure.

Do scroll compressors need Hard start kits?

Because of the operating characteristics of scroll compressors, they do start easier and may not need start kits. In these cases, hard start kits should be applied to the compressors.

What is the difference between a run capacitor and a start capacitor?

The start capacitor creates a current to voltage lag in the separate start windings of the motor. The current builds up slowly, and the armature has an opportunity to begin rotating with the field of current. A run capacitor uses the charge in the dielectric to boost the current which provides power to the motor.

Should I use a hard start capacitor?

A hard start capacitor kit is worth considering for an older AC or heat pump unit, especially one that is sluggish and won’t always start easily – or start at all. Adding a hard start kit to your condensing unit – the outside unit in your HVAC system – can delay the need for system replacement by quite a few years.

Can you return AC after installation?

Once AC unit has been delivered and it is opened by you/ or installed at your premises, no REFUND/RETURN request would be entertained. You would have to seek manufacturer warranty therof according to T and C of respective manufacturer.

Does changing thermostat void warranty?

The important information to know is that a new thermostat installation might void your equipment warranty. For many HVAC systems, the warranty is nullified if the thermostat originally installed with it is changed. This is why putting in a new thermostat may void the warranty.

Does a soft start void warranty?

According to legal experts, your warranty should not be voided. If your manufacturer does not cover the repair or replacement of the compressor under warranty, then we’ll replace your compressor, if it’s due to the SoftStartRV malfunctioning.