Table of Contents
A pipe wrench has two serrated jaws that are tightened and dig into the pipe for grip. The top serrated jaw adjusts up and down to fit different size pipes. The unique feature of a pipe wrench is that the teeth will only grip when turning the wrench in one direction (see above), so it almost acts as a ratchet wrench.
What can I use instead of a pipe wrench?
While the pipe wrench is still used for steel and iron pipe, it has mostly been replaced by tongue-and-groove pliers, also known as channel-type, slip-joint, or Channellock pliers (a brand name that has become a generic term).
What is a pipe wrench used for?
The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work.
What is the difference between a monkey wrench and a pipe wrench?
Monkey wrenches and pipe wrenches are very similar, but they have different jaw designs. Monkey wrenches have flat jaws, while the jaws on pipe wrenches have teeth for gripping rounded surfaces. You should use monkey wrenches for flat surfaces and pipe wrenches for rounded surfaces.
What is the difference between a pipe wrench and an adjustable wrench?
Pipe wrenches are sold in a variety of sizes based on the length of the handle. Sizes typically range from 10 to 48 inches. Pipe wrenches are generally heavier than adjustable wrenches for wrenches of comparable length. Adjustable wrenches generally range in size from 4 to 12 inches.
How do you open a pipe without a wrench?
What to Use if You Don’t Have a Wrench Duck tape. Duct tape is useful in almost any situation but you may be surprised to learn that you can use it to loosen bolts. Two coins. Who would think that money can be used as a makeshift tool? Zip-tie. Another nut and bolt.
Is a pipe wrench a good weapon?
The Pipe Wrench is a powerful melee weapon that deals more damage than the Combat Knife or the Crowbar. The secondary fire will have Shephard lift the wrench over his head and bring it down with considerable force, an attack which becomes even stronger as the button is held down.
Which pipe wrench is best?
Top 7 Best Pipe Wrench Reviews #1 Tradespro 830914 14-Inch Heavy Duty Pipe Wrench. #2 RIDGID 31100 Model 818 18-in Aluminum Straight Pipe Wrench. #3 Ridgid 31000 6″ Pipe Wrench. #4 Crescent 9″ Automotive Wrench. #5 MAXPOWER 2-Piece Heavy Duty Wide Open Adjustable Wrench Set.
How do you measure a pipe wrench?
Instead, most adjustable wrenches are measured by the length of the handle. So, an 8-inch adjustable wrench has a handle that’s 8 inches long, and a 12-inch adjustable wrench has a handle that’s 12 inches long.
What is a spud wrench?
A spud wrench is a wrench with an adjustable or standard box wrench on one end and a tapered spike on the other. The spike can be used to line up bolt holes when installing pipe fittings, doing automotive work or—in the case of iron workers—for lining up bolt holes in girders and beams.
Is a pipe wrench a crescent wrench?
Overview: The Crescent Self-Adjusting Pipe Wrench features a unique head design that instantly grips and releases pipes and other types of fasteners with a fast ratcheting action.
Why is a wrench called a spanner?
‘Wrench’ is derived from Middle English wrench, from Old English wrenċ, from Proto-Germanic *wrankiz (“a turning, twisting”). First used in 1790. ‘Spanner’ came into use in the 1630s, referring to the tool for winding the spring of a wheel-lock firearm. From German Spanner (n.), from spannen (v.).
Can a pipe wrench be used on nuts and bolts?
Inspect the knurl, jaw, and pin for wear. Do not pull on an adjustable wrench that is loosely adjusted. Do not use pipe wrenches on nuts or bolts.
What is the cost of pipe wrench?
Top Selling Pipe Wrenches Price List in India Latest Pipe Wrenches Models Price Taparia 900mm Heavy Duty Pipe Wrench, HPW 36 ₹3304 Stanley 10 Inch Stillson Type Pipe Wrench, 71-641 ₹244 Stanley 10 Inch Heavy Duty Pipe Wrench, 87-622-23 ₹427 Taparia 300mm Heavy Duty Pipe Wrench, HPW 12 (Pack of 2) ₹1128.
Which way do you turn to loosen plumbing?
Turning to the left loosens the plumbing fitting; turning to the right tightens it. Remembering this simple rhyme can prevent a bad seal and stripped fittings. It’s also handy in a pinch if you need to shut off the water supply quickly.
Is there a way to take apart PVC pipe?
Cutting back the PVC pipe to a new point is actually the best way to separate PVC pipes and remove the glue. Professional plumbers usually will cut away PVC pipe rather than try to separate it. PVC pipe is soft and easy to cut. Use a hacksaw or a PVC pipe cutter to cut off the section you would like to separate.
How do you unscrew a plastic nut under the sink?
Use Heat or Calcium Dissolver Whether you use a basin wrench or a hammer and screwdriver, the nut is easier to loosen if you heat it with a hairdryer. The heat should soften the plastic and make the nut pliable enough to break free.
Why are monkey wrenches called monkey wrenches?
Charles Moncky, a Baltimore mechanic, invented the monkey wrench around 1858. Moncky’s wrench was named using a purposeful misspelling of his name. Stillson, a steamboat firefighter, received a patented on September 13, 1870 for an invention later known as the Stillson pipe wrench.
What is the most common size pipe wrench?
Many homeowners typically use a 14-inch and 12-inch model, but models can also be found up to 36-inches best suited for working on a threaded pipe. They have angle head wrenches as well as strap/chain wrenches. Despite having many sizes, they rarely need anything that is over 18-inches in a normal house.
What does a box end wrench look like?
Box-end wrenches have ends that enclose the nut and have 6, 8, 12, or 16 points inside the head. Early box and socket wrenches fit only a particular nut or screw with flat surfaces on the head. The open-end wrench may have rectangular slots on one or both ends.
