Table of Contents
Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘T’ in T1 stands for “textured,” which references the grooves or channels cut into the siding.
Is T1-11 better than plywood?
T1-11 Siding Explained T1-11 siding comes in two major grades: plywood and OSB, which stands for ‘Oriented Strand Board. However, the plywood version of T1-11 is far superior overall to the OSB version because of its greater durability and the variety of finishing options it offers.
Is T1-11 siding waterproof?
T1-11 siding is not waterproof because it is not treated with any resins and chemicals that repel moisture. T1-11 siding needs to be protected against the weather with primer, paint, or stain. You also need to caulk around doors, windows, joints, and nails to keep the water out.
Is T1-11 treated?
T1-11 siding is not treated and is vulnerable to moisture damage. It comes in two types: plywood and OSB (oriented strand board). The OSB version of T1-11 is made with wood pieces and strands glued together and water-treated with binding resin. Some manufacturers also produce pressure-treated plywood siding.
Is T1-11 tongue and groove?
All types of T1-11 siding have outer edges with 3/8-inch wide lips on the long sides, designed to overlap the piece that was installed previously. This is not a tongue-in-groove joint, but rather a lap joint. Panels are always installed with the grooves running vertically.
How much does a sheet of T1-11 cost?
T1-11 Plywood Costs Depending on the finish and size, this siding costs between $25 and $40 per 4 foot by 8 foot sheet. Add installation costs and construction materials, and you end up with a range between $3.50 and $7.20 per square foot.
Does T1-11 siding need Tyvek?
Do I Need Tyvek Under T1-11 Siding? T1-11 is both a siding and a sheathing and can be fastened directly to the exterior face of the studs. House wrap like Tyvek or tar paper provides a wind and moisture barrier which can be beneficial depending on the purpose of the structure it is used on.
Can T1-11 be hung horizontally?
If you carefully read the instructions, you will not find any instructions that say it cannot be installed with the grooves horizontal. Rather, they only show it installed vertically.
Is it better to paint or stain T1-11 siding?
Plywood T1-11 accepts stain well and takes on a grainy appearance that blends well in rural surroundings. Staining T1-11 is less work than painting it — you may need only one coat — but prior cleaning of the substrate is even more important, because any dirt and discoloration shows through.
What is better than T1-11?
It can stand up to harsh weather in any climate and resists damage from termites and fungal decay. How to Decide: If you want the most durable siding available, then LP wood siding is your better choice. If you want to sacrifice some durability for savings, then choose the plywood grade over the OSB T1-11.
Why is it called T1-11?
Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘T’ in T1 stands for “textured,” which references the grooves or channels cut into the siding.
How do you seal the bottom of T1-11 siding?
Trim the siding with one-by-four-inch wooden trim, covering the gaps around windows and doors, under the soffit and on the corners of the house. Nail the trim with two-inch galvanized nails, then caulk around it with acrylic latex caulk.
Can T1-11 be used indoors?
T-111 is a good choice for unheated interiors.
What is plywood with grooves called?
T-111 Siding. 1/2″ T-111 siding is an exterior grade 4×8 panel. It is ideal for siding new construction, storage buildings, dog houses, and other projects.
Does T1-11 need to be primed?
The other downside of OSB T1-11 is you can’t stain this siding. It must be primed and painted, taking away one of the primary reasons homeowners choose to go with this particular siding material.
How much does it cost to Tyvek a house?
Cost of Tyvek Home Wrap Tyvek House Wrap Costs Zip Code Sq. ft. Basic Better Installation Cost $250.00 – $350.00 $500.00 – $650.00 Total $360.00 – $470.00 $630.00 – $790.00 Tyvek House Wrap – Total Average Cost per square foot $0.41 $0.71.
Why is OSB sheathing so expensive?
Durable wood also lasts longer. Since it lasts longer, manufacturers will sell fewer boards over time. To ensure they don’t miss out on future profit, they need to price their boards at a higher price point. OSB is expensive because it’s durable and requires more resources and processes to make it.
Is OSB better than plywood?
Osb is stronger than plywood in shear. Shear values, through its thickness, are about 2 times greater than plywood. This is one of the reasons osb is used for webs of wooden I-joists. However, nail-holding ability controls performance in shear wall applications.5 days ago.
How do you nail T1-11 siding?
Secure the T1-11 to one of the wall studs next to the center stud with 8d nails placed every 8 inches, using the chalk line as a nail placement guide. Drive the first nail into the center of the siding and work toward the top and bottom edges. Place the last nail on each stud within 1 inch of the siding’s edge.
How do I fasten my T1-11?
T1-11 siding is designed for installation on framing with standard 16-inch spacing. You can attach them with exterior screws or galvanized nails. Wrap the house with house wrap or 15 mil tarpaper. Staple the material to the studs with a staple gun and cut openings for doors and windows with a utility knife.
