Table of Contents
AW22 or 32 Hydraulic oil is recommended for the log splitter. Automatic transmission fluid can be substituted and should only be used instead of hydraulic oil when temperatures are below 32 degrees F.
What kind of oil goes in a log splitter?
Electric log splitters require hydraulic oil with a 10W (Winter) weight rating. This hydraulic oil type provides lubrication for gears and other mechanical parts during extreme cold and heat, effectively protecting parts from wearing down.
Will tractor hydraulic fluid work in a log splitter?
Would tractor hydraulic fluid hurt a log splitter? No. But the pump is designed for a single viscosity – AW46 typically, AW68 in extreme hot weather, or maybe an AW32 if you’re in the arctic. A tractor hydraulic fluid is closer related to 10w30, it is fairly multi-viscosity.
Can I use hydraulic jack oil in my log splitter?
Is a Hydraulic Jack Oil effective for log splitters? Hydraulic jack oil is easy to use and has many advantages over the standard log splitter oil. While hydraulic jack oil is not a substitute for shape oil, it may be used as a substitute when product-filled axles cause wear on other gears or main components.
How often should you change hydraulic fluid in a log splitter?
How often should you change hydraulic fluid in a log splitter? A lot of manufacturers will advise that you should change your fluid after every 50 hours. However, if the fluid used is of high quality this will usually give you around 150 hours of log splitting operation.
What is the difference between AW 32 and AW 46 hydraulic oil?
AW32 is approximately a 10 weight oil with the additives ▪ AW46 is approximately a 15 weight oil with the additives ▪ AW68 is approximately a 20 weight oil with the additives AW –provides many of the advantages of premium hydraulic oil at a moderate price.
Can you use synthetic oil in a log splitter?
Although you should always use the oil recommended by the log splitter manufacturer to avoid damage to your splitter, you should understand what you are looking at when purchasing the oil type. Mineral oil hydraulic fluids are derived from crude oils, whereas synthetics are man-made in a lab.
What is 10W AW hydraulic fluid?
Mobil Hydraulic 10W is a high performance hydraulic oil formulated from advanced base oils and a balanced additive system designed to satisfy a wide range of heavy-duty hydraulic equipment requirements.
How do you fill hydraulic fluid in a log splitter?
To add the appropriate amount of hydraulic fluid, you must first remove the oil filling plug. Then fill the hydraulic fluid unit until it is three-fourths full. After you have added the right amount of hydraulic fluid, you’ll need to remove, or bleed, the trapped air from the cylinder.
What kind of hydraulic fluid does a Troy Bilt log splitter take?
The approved fluids that our log splitter hydraulic systems may be filled with are: Dexron III Automatic Transmission Fluid. 10W AW Hydraulic Oil. Pro Mix AW-32 Hydraulic Fluid.
Is hydraulic oil and hydraulic jack oil the same?
What is hydraulic jack oil and how is it different from ordinary hydraulic fluids? The answer is clear, that hydraulic jack oil itself is a hydraulic fluid that is used for power generation, sealing, heat transfer, lubrication and more.
Which oil is used in hydraulic system?
Today most hydraulic fluids are based on mineral oil base stocks. Natural oils such as rapeseed (also called canola oil) are used as base stocks for fluids where biodegradability and renewable sources are considered important.
Is ATF the same as hydraulic fluid?
Some automatic transmission systems use automatic transmission fluid, also known as ATF, as a hydraulic fluid and a gear lubricant. ATFs may be pressurized by a pump and regulated by valves in a similar manner to other hydraulic systems.
Does hydraulic oil have a shelf life?
The recommended shelf life for oils and greases is usually five years when stored in original sealed containers.
Why does my log splitter bogs down under pressure?
Hydraulic systems use pressurized fluid to power a force. If your splitter is bogging down under pressure or seems weak, chances are there is something not right with how this system is operating in reference to the size of the hydraulic pump and what it is capable of.
Is hydraulic oil better 32 or 46?
32 is thinner, No. 46 is medium and No. 68 is thicker. Generally speaking, if the temperature is low in winter, use #32 & #46 hydraulic oil with a lower viscosity, and use #68 hydraulic oil with a higher viscosity in summer.
Is AW 68 the same as ISO 68?
The quality of the base oil controls corrosion, oxidation, and suppresses foam and aeration. AW 68 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 68. This is the thickness of the fluid tested at 40 degrees Celsius.
How do I choose a hydraulic oil?
When selecting the appropriate viscosity grade, look for the optimum viscosity required by the pump. This can be determined by collecting data from the pump OEM, actual operating temperature of the pump, and the lubricant properties referenced to the ISO grading system at 40 and 100 degrees Celsius.
How good are electric log splitters?
If you want to do you back a favor and replace your axe with a log splitter, there are many great options to choose from. While gas-powered versions are bigger and more powerful, electric splitters are quiet, less polluting – and usually quite sufficient for most home users.
Is AW 32 the same as 10W?
SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100. As you can see, there is a bit of a difference between ISO 68 and SAE 30. The viscosity of the fluid largely determines the oil temperatures within which the hydraulic system can safely operate.
What color is AW 32 hydraulic oil?
Specifications SKU CLAR32 Pour Point, °C(°F) -33C (-27F) Flash Point 222C (432F) Specific Gravity API 32.8 Color Other.
What is the difference between ISO 32 and AW 32 hydraulic oil?
ISO 32 is simply a viscosity range for industrial oils, normally used in hydraulics, it says nothing about any additives that may be present. AW 32 is required to contain anti wear agents, it may also contain other additives, but may be harmful in certain applications.
