Table of Contents
What are the 6 types of construction drawings?
What Are the Six Types of Construction Drawings? Plans. Interior and exterior elevations. Building and wall sections. Interior and exterior details. Schedules and room finishes. Framing and utility plans.
What are considered shop drawings?
Shop drawings are produced by contractors and suppliers under their contract with the owner. The shop drawing is the manufacturer’s or the contractor’s drawn version of information shown in the construction documents. The shop drawing normally shows more detail than the construction documents.
What are electrical shop drawings?
Electrical Shop Drawings Most shop drawings consist of an overlap of electrical and mechanical components. With the help of detailed electrical shop drawings, contractors assess the exact layout of electrical units to install mechanical units smoothly.
What is the difference between shop drawings and working drawings?
Working drawings help to represent components and communicate with end clients. Shop drawings, on the other hand, are used by fabricators to know how the components will be manufactured and installed during the construction process.
What does Fl mean on civil drawings?
Floor Level Abbreviation or symbol Definition FL flag note, flagnote FL Floor Level FN or F/N flag note, flagnote; find number FoS feature of size.
Which type of drawing is most often used in construction?
Most drawings prepared during the design and construction of buildings might be considered to be technical drawings. For more information see: Technical drawing.
Are shop drawings and submittals the same thing?
The shop drawing process formalizes the method for a contractor to demonstrate how it will accomplish these design obligations. The submittal process forces the contractor to show how it intends to execute the work and allows the design professional to review those intentions for com- pliance with the design intent.
What is the difference between shop drawings and IFC drawings?
Shop drawing is a drawing that is produced by the contractor, subcontractor, manufacturer, fabricator or the supplier whereas IFC (Issued for Construction) is a type of drawing issued to the contractor by the client or his/her representative.
What is steel shop drawings?
Shop drawings are typically a set of drawings required for prefabricated components. These drawings are usually produced by the fabricator, manufacturer, contractor or supplier. Shop drawing includes dimensions, manufacturing standards, fabrication. They contain more details compared to construction documents.
Who is normally responsible for the preparation of shop drawings?
The preparation of shop drawings is generally the responsibility of the trade subcontractors and is carried out by specialist shop drawing contractors.
Who is responsible for reviewing the shop drawings?
7 of AIA A201 , the contractor must review and approve shop drawings before sending them to the architect or engineer. Engineers should not accept submittals directly from a subcontractor or vendor. This bypasses the general contractor’s opportunity to review drawings for coordination.
Do shop drawings supersede contract drawings?
The fabricator’s drawings are then given to “the shop” for use in making the component – thus the name “shop drawing.” As one court stated, “shop drawings are the final word as to how the work should proceed on the job, and supersede the architectural plans.”Jan 6, 2020.
What is the difference between architectural drawings and shop drawings?
As-built drawings can be made for the whole building as well as for specific components. But the shop drawings are only made for the different components of a building. Both types of drawings are not a part of the contract documents. They can be or cannot be included in the contract.
Do shop drawings need to be stamped?
Shop drawings that are derived from seperate design drawings need not be sealed and stamped by a design professional. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
What is the difference between product data and shop drawings?
1: “Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor…” 3.12. 2: “Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor…”May 12, 2006.
What does BV stand for in construction?
House plan abbreviations ABBREVIATION MEANING BV Brick veneer BWK Brickwork C Cooker CAB Cabinet.
What does MUD stands for in civil engineering?
MUD. Municipal Utility District, provides utility services (typical water and/or sanitary sewer) in areas outside the City Limits or where City utilities aren’t available. Plat. Not an acronym.
What does SS mean in construction?
SS: Stainless Steel, Setscrew, Soil Stack, Service Sink, or Slop Sink.
What are the three types of working drawings?
Below are the different types of construction drawings. 1 Architectural Drawings: This is one of the types of construction drawings. Structural Drawings: Electrical Drawings: Plumbing and Sanitary Drawings: Finishing Drawing:.
Which drawing gives the all heights of building?
1.4 Elevation Drawing Elevation drawing represents the information of openings, size and shape of external surface, height of building and finish of the building after completion. These drawings are made by having a aesthetic view of the building.
What drawings do builders need?
For most projects, you’ll need the following types of construction drawings to apply for planning permission or a lawful development certificate: Existing floor plans. These are accurate drawings of what the building looks like as it stands today. Design floor plans. Elevations.
Why are shop drawing submittals required?
Submittals in construction management are shop drawings, material data, samples, and product data. Submittals are required primarily for the architect and engineer to verify that the correct products will be installed on the project.
What are the three types of submittals?
Submittals can be categorized as follows: Preconstruction Submittals. Construction Submittals. Closeout and Maintenance Submittals.
Are Shop Drawings contract documents?
Shop Drawings—All drawings, diagrams, illustrations, schedules, and other data or information that are specifically prepared or assembled by or for Contractor and submitted by Contractor to illustrate some portion of the Work. Shop Drawings, whether approved or not, are not Drawings and are not Contract Documents.
What are AFC drawings?
An Approved for Construction (AFC) means that the document or drawing was reviewed and approved by authorities of internal and external organisations including the client representatives for the construction.
What is the difference between AFC and IFC?
A Construction team must use only an AFC marked or stamped drawings and documents for the construction works and activities. Issued for Construction (IFC) means that the document or drawing which are categorised as the review, and Issued for Construction.
