Table of Contents
The blend door actuators, also called HVAC actuators, control the position of the vents that control the flow of air into your vehicle’s passenger area. When the blend door actuators are not working properly, this can result in the heating or the air conditioning failing to enter the passenger area.
What does a bad blend door actuator do?
If you hear a droning or squeaking sound coming from the center of your dashboard, there is most likely something wrong with your blend door actuator. These sounds will usually get louder when you turn on your AC or change the temperature.
How much does it cost to replace a blend door actuator?
Blend Door Actuator Replacement Cost The blend door actuator usually costs between $100 – $300 depending on the car’s make and model, before labor costs. On average you can expect to pay around $150 for the actuator itself.
How do I know if my actuator is bad?
Symptoms of a Faulty Door Lock Actuator Power Door Lock Doesn’t Work. A single bad door lock actuator can prevent one of your car’s power door locks from working. Power Door Lock Operates Erratically. Strange Noises When Operating the Power Lock. Sluggish Operation From the Door Lock.
How long does it take to fix a blend door actuator?
Expect the replacement work to take one to two hours, including testing.
Can you drive with a bad actuator?
Although a faulty blend door actuator can prevent your climate control system from working properly, the problem will not stop your vehicle from running well. If you can stand the discomfort of the climate control not working correctly, there’s no reason why you can’t continue driving with a faulty blend door actuator.
Can I drive without a blend door actuator?
Safety: Can I drive without doing an HVAC Blend Door Actuator Replacement. Driving isn’t a problem for this environmental issue, but your passengers won’t be comfortable or happy. Don’t let them suffer, count on a mobile mechanic from Wrench.
How many blend door actuators does a car have?
Most vehicles have two blend door actuators, one on the driver side and one on the passenger side. Fortunately, you do not need to remove the dashboard in order to get to them. Some experts recommend that you disconnect the vehicle’s battery to remove and replace the blend door actuators.
Will a blend door actuator cause no heat?
If the door moves easily, then the problem is in the blend door actuator or the heater control head. If the motor fails when the door is closed, that could cause a no heat in car condition. During air conditioning season, a bum blend door actuator can fail in a full or partially open position.
Can you manually move the blend door actuator?
The actuator is what needs replacing. The arm/hinge that is moving up and down is just the thing you need to grab with your finger to manually flip the blend door over to the hot temp side.
Does the blend door actuator have a fuse?
The blend door actuator fuse in Your 2010 Ford F-150 can be found in the fuse panel that is located in the passenger’s footwell. The panel can be found behind a plastic door that has fuse written on it. The blend door actuator controls the blend door’s position.
What causes door actuators to fail?
It could be a main door lock switch, broken door wiring harness, bad connector, failed control module or simply a blown fuse.
How many actuators does a car have?
Typically, vehicles have 3 or 4 actuators. Vehicles with rear controlled HVAC will often have additional actuators to control the auxiliary unit, bringing the total per vehicle to as many as 6.
Where is my blend door actuator?
Where is the blend door actuator located? Remove the glove box and under-dash trim panels to find and replace the door actuator.
Why is my car blowing hot air on one side and cold air on the other?
Blend door actuators are the most common reason for the car air conditioning to blow cold air on one side and hot air on the other. They can be diagnosed with an advanced scan tool. If it does not move with the adjustments and commands, there is a problem with the blend door actuator and it will need to be replaced.
Can a bad blend door actuator drain battery?
The door lock actuator has a battery drain. The battery runs down when the interior lights stay on longer than normal. It’s a bad actuator if it doesn’t work 100 percent of the time.
Where is the actuator in a car?
The AC actuator is located underneath the dashboard attached to air distribution doors in the hvac box. Doors can control warm air/cold air blending, recirculated/fresh air control, or dual zone splitting. The motors can move the doors into many different positions, or just two.
How do I reset my blend door actuator Ford?
First thing You will need to do is remove the fuse for the actuator from the fuse panel in the driver’s footwell. After that You will want to start the car and run the AC system for a few minutes. Finally shut off the car and put the fuse back in and see if the blend door works.
Why is my AC cold on one side?
Due to the design of dual AC systems, low refrigerant is the leading cause of drastic temperature difference from one side of the dash to the other. In most cases after the proper charge of Freon is in the car, the temp will blow equally as cold like it should on BOTH sides!Dec 27, 2019.
