QA

What Is A Driveway Apron

What is a driveway apron? It’s the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.

What is the purpose of a driveway apron?

Driveway Apron means that portion of a regularly established driveway lying between a property line and any curb, the purpose of which is to provide vehicular access from the street across the curb, parkway and sidewalk to the property fronting thereon or abutting thereto.

How much does driveway apron cost?

For a poured concrete apron, expect to pay $3 to $10 per square foot, which includes fill sand, steel reinforcement, and concrete delivered by truck (sack-type concrete is not suitable for this project). Professional installation will add another $8 to $12 per square foot.

What is the purpose of a concrete apron?

Concrete aprons aid in stormwater management as they prevent water from pooling on concrete surfaces. Aprons help to divert rainfall away from your parking lot. Concrete aprons also add aesthetic value to your property by breaking up the scenery and making your parking lot more appealing to look at.

What are the parts of a driveway called?

The component parts of the driveway approach are termed the apron, the end slopes or the curb return, and the sidewalk section.

What does a driveway apron look like?

What is a driveway apron? It’s the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.

What is an asphalt apron?

Asphalt Settlement A driveway apron is an area that connects and provides a smooth transition from the street to the driveway, and from the driveway to the garage. And if your apron starts to sink, it will not only detract from your property’s curb appeal, it can also pose serious danger.

Is a garage apron necessary?

The concrete garage apron is necessary to provide a transition between the driveway level and the garage floor. The driveway is not always level with the garage floor.

Whats an apron slab?

An apron slab is a smooth impermeable surface constructed around a water point to prevent spilt water soaking into the ground. Apron slabs are not only used with handpumps installed over boreholes.

What is apron in box culvert?

Apron: A hardened surface (usually concrete or grouted riprap) placed at either the invert of the culvert inlet or outlet to protect structure from scour and storm damage.

What does apron mean in construction?

An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.

What is a driveway curb?

A home driveway is typically made from gravel, concrete, or asphalt. The driveway curb is a special cutout area of the sidewalk that allows vehicles to access the driveway to the home from the main road surface.

How much does an apron cost?

A concrete apron can cost $3-$10 or more a square foot, or $550-$1,800 for 12’x15′. With decorative elements (stamped patterns, a pigmented color, a textured finish) the cost can be $6-$25 or more a square foot, or $1,100-$4,500 or more. Some municipalities will replace a deteriorating apron for a fee.

What is a ribbon driveway?

What is a ribbon driveway? Ribbon driveways, sometimes called Hollywood driveways, usually consist of two parallel tracks paved with a hard material and separated by an unpaved area.

Should driveway be pinned to garage floor?

Driveway will freeze and rise before the garage floor does (unless your wife is like mine and leaves the door open all night and then closes it in the morning to trap the coldest air inside). Do not pin. Use an expansion joint, allowing the driveway to “float” for expansion (heat) and contraction(frost).

How much does it cost to concrete a house?

Expect to pay $50 to $75 per square metre for spray-on concrete, $60 to $85 per square metre for plain concrete, $75 to $90 per square metre for coloured concrete and $100 to $150 per square metre for exposed aggregate or a decorative stencilled finish. For the cost of concrete per m3, expect to pay $200 to $300.

How do you lay a sett?

Lay your cropped granite setts in the mortar bed, placing them 8 to 15mm apart. Bed the setts down firmly into the mortar by tapping them lightly with a rubber mallet. Use a trowel to fill the joints with of four parts sand to one part cement. The mix should be of a “wet” workable consistency.

Is cobblestone more expensive than concrete?

Cobblestone pavers are extremely elegant and durable, but they are not cheap. If you are looking for a low budget driveway, you might be better off considering concrete pavers, gravel, concrete, or asphalt. But if you want a tough, attractive, and unique driveway, it’s hard to beat cobblestone.

What is an apron in a parking lot?

[′pärk·iŋ ‚ā·prən] (civil engineering) A hard-surfaced area used for parking aircraft.

What is asphalt driveway?

What Is an Asphalt Driveway? Asphalt driveway material is similar to what you see road crews laying on roads. Also called hot mix or hot mix asphalt, this type of driveway is an aggregate of stone and sand, along with a slurry of asphalt, a tar-like material made from petroleum.

What causes driveways to sink?

A sinking driveway is commonly caused by the underlying fill soil collapsing because of organic material (like stumps and roots) decomposing and collapsing, or fill dirt that was not properly compacted.