What Is A Good Rub Count For Fabric

25,000 double rubs is a great place to start for residential upholstery, while commercial projects generally require fabrics to be over 100,000 double rubs.

What is rub count on fabric?

A rub test is a method of assessing the durability (or ‘abrasion resistance’) of a fabric. During the test, a specialist machine vigorously rubs the fabric. When the fabric begins to show signs of wear and tear, the test finishes by counting the number of ‘rubs’ up to that point. This gives a textile a ‘rub count’.

Is 100000 double rubs meaningless?

“Multiple factors affect fabric durability and appearance retention, including end-user application and proper maintenance. Wyzenbeek results above 100,000 double rubs have not been shown to be an indicator of increased lifespan.”Apr 23, 2015.

Is 30000 Double Rubs good?

Very high traffic areas such as hospital waiting rooms, university lounge areas, and restaurants require a double rub counts of 30,000 or more in a synthetic material to meet their standards of wear. Light-duty textiles, like those used in curtains and pillows, can get away with a double rub count of 6000 – 9000.

Is 15000 Double Rubs good?

Contract Upholstery Minimum: The absolute lowest double rub rating you want for office-grade furniture is 15,000. This is considered the best for the average office.

What is a good Martindale rub count?

15,000 – 25,000: General domestic use.

Which fabric is best for sofa?

Cotton is a natural fiber that is a sofa staple for sofas for several practical reasons. First, cotton is among the most cost-efficient options around – always a plus. Second, cotton takes patterns and colors well, making it highly versatile.

How many double rubs do I need?

Double Rubs for Commercial Applications Contract Upholstery Minimum: 15,000 double rubs is considered the minimum for general contract, commercial upholstery projects. Heavy Duty: 15,000-30,000 double rubs. Suitable for single shift offices, conference rooms, hotel rooms and dining areas.

What is a high rub count?

It’s resistance to abrasion is tested by a machine that rubs the fabric over and over until it finally wears through. The amount of passes that it takes to reach this point is the fabric’s rub count. The higher the number, the longer the fabric will last. Residential fabric will range from 15,000 or higher double rubs.

What upholstery fabric is most durable?

Microfiber is one the most durable fabrics, besides leather. Check to make sure it is 100 percent polyester so that it does not stain, fade, or leave water marks if you splash water on it.

What is a good Wyzenbeek score?

Which tests are used and what do the test results mean? Wyzenbeek Light use 6,000 – 9,000 Medium use 9,000 – 15,000 Heavy use 15,000 – 30,000 Maximum use > 30,000.

What does grade A fabric mean?

Grade A fabrics are made from polyester or polyester blends. Polyester is strong, durable, resists wrinkles, dries quickly and resists mildew, but lacks anti-fading advantages of other higher-grade fabrics.

What is a good Martindale rating?

General domestic use when Martindale value is 15000-25000. Recommended for everyday use yet not suitable for motion furniture (sofa beds, recliners). In this case one should consider using an upholstery fabric from higher Martindale category. Heavy duty use when Martindale value is 25000-30000.

How do you measure fabric durability?

How To Measure Textile Durability. Double rub. Most fabrics come with a double rub rating. The SUTHERLAND® 2000™ Rub Tester machine is used to rate textile durability according to its strength and ability to resist tear after several washes.

WHAT IS fabric cleaning code?

S – Spot clean only with a water-free dry cleaning solvent. DO NOT USE WATER. WS – Spot clean with upholstery shampoo, foam from a mild detergent, or a mild dry cleaning solvent. X – Clean only by vacuuming or light brushing with a non-metallic, stiff bristle brush.

What does abrasion mean in fabric?

Defining Abrasion Resistance. Abrasion resistance is the ability of a fabric to resist surface wear caused by flat rubbing contact with another material. There are two different test methods commonly used by the textile industry to assess abrasion resistance: Wyzenbeek and Martindale (described in detail below).

What is a good rub test?

Less than 10,000 rubs are recommended for decorative uses only like cushions or furniture that is not used. 10,000 – 20,000 rubs are recommended for light domestic use so furniture that is only occasionally used or for short periods, so bedroom furniture, dining room chairs etc.

What is double rub in fabric?

Double rubs are a way to measure the abrasion resistance and durability of a fabric. One back and forth motion counts as one double rub. This testing method is meant to mimic the “wear and tear” of everyday use.

How do you do a pilling test?

The swatches are rubbed together in a figure 8 motion for a number of cycles after which their surface appearance gets compared to a series of standardised images to determine the test result. The result is measured against a scale of 1-5; one representing severe pilling; five representing no pilling.

Which sofas last the longest?

Couches that have a dense hardwood frame (like maple, walnut or teak) are the most durable. Tightly woven textiles and leather are long-lasting fabric choices.

Which type of sofas are best?

Sofas in cotton or linen fabric, and leather sofas are classic upholstery materials that are worth investing in. Synthetic fabrics like microfiber are also great options that are durable and easy to clean.

What is the most hard wearing sofa fabric?

Undoubtedly the most durable material these days is polyester; it offers numerous benefits as an upholstery fabric and can resist more damage than natural materials. As a whole, it’s a strong artificial fibre that can tolerate daily use.

What does light upholstery mean?

If the fabric is between 8,000 to 10,000 double rubs, it is designed for light use and it won’t sustain everyday wear and tear. Most residential upholstery fabric falls into this category and can withstand 10,000 to 25,000 double-rubs.

What does Wyzenbeek mean?

Wyzenbeek involves rubbing along the warp and weft of the fabric whereas Martindale is a figure-8 rub. Success in one test does not infer success in the other. The Wyzenbeek and Martindale tests are the two methods commonly used to predict wear-ability.