Table of Contents
The Tiger Loop is a lifting and de aerating device that improves performance and provides convenience to diesel (oil) boiler installations. The second fuel line from the boiler burner to the Tiger Loop is the return line for relieving pressure of the fuel delivered to the burner but not used.
Is a Tiger Loop necessary?
The one-pipe system without a Tigerloop® is not to be recommended. This is due to the increased risk of breakdowns, as gas/air bubbles cannot be removed from the oil pump during operation. Such a system will only work as long as the oil is continuously 100% free of gas/air bubbles.
How does a oil Tiger loop work?
Tigerloop® sits between the oil tank and the burner in an oil heating system, so that all oil passes through it. It continuously and automatically removes air from the oil before passing it to the burner, so that bubble-free oil is burnt, eliminating poor combustion, noise, damage, soot, and smoke.
How high will a tiger loop lift?
– Max lift: 3.66m (12ft) @ 30m (100ft) distance with a 10mm line. – Remove any non‑return valve in the feed line & fit bypass screw to boiler burner pump. – Max nozzle capacity: 110L/hr.
Can you install a tiger loop inside?
The New Bio Tigerloop is constructed externally of metal materials making it suitable for both indoor and outdoor installation.
Do oil tanks need to be raised?
We recommend your oil tank is installed outside, above ground within a secondary containment system. Position your tank to minimise risk of pollution and maximise its security.
Why do I have to keep bleeding my oil furnace?
Typically, the reason for bleeding the furnace has to do with fuel levels: If you let the oil completely run out, that’s when the furnace may need extra help starting up again. To prevent this problem, refill the tank before the oil gets extremely low. You’ll also keep yourself from freezing when the furnace shuts off.
How does an oil De aerator work?
De-aerator is used to remove any dissolved oxygen in the feed water. The oxygen if not removed, may lead to corrosion of the internal parts of the system. Thus a de-aerator completely removes the air and vapour from the system, which helps in reducing the maintenance of the system.
When should an oil pump internal bypass plug be removed?
58-14) When should an oil pump internal bypass plug be removed? The bypass plug should be removed for a 1 pipe system and in place for a two pipe system. 58-15) How can a leak in the fuel suction line cause no oil to be delivered to the pump?.
What is a fire valve?
A fire safety valve aims to keep ignitable fluids away from a flame. These valves close when exposed to heat, separating a flammable liquid from the heat source.
What components of the oil burner are responsible for atomizing the oil?
The regulating valve, located in the pump housing, produces the right amount of pressure to atomize or break down the oil. The ignition/transformer produces a high-voltage spark that provides enough heat to vaporize the atomized oil from the nozzle and achieve ignition.
How far can an oil tank be from the house?
To protect tanks from an ignition source, tanks should be sited: 1.8m away from non-fire rated eaves of a building. 1.8m away from a non-fire rated building or structure (e.g. garden sheds) 1.8m away from openings (such as doors or windows) in a fire rated building or structure (e.g. brick-built house/garage).
How thick should a concrete slab be for an oil tank?
Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick. The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety.
Are oil boilers gravity fed?
There are two types of oil feed systems; gravity and sub-gravity. Gravity feed systems are typically used with bottom outlet oil storage tanks installations and or/where a tank has to raised off the ground. An OFTEC registered technician will work out the correct size of pipe for your system.
Can I put diesel in my oil furnace?
Diesel, as sold at many gas stations, is an acceptable replacement for home heating oil in virtually all furnaces. Both diesel and heating oil No. It’s recommended that you turn off your furnace before pouring the diesel into your heating oil tank, then wait 10 minutes or so before turning the furnace back on.
How long will 5 gallons of diesel last in oil tank?
How long will 5 gallons of diesel last in an oil tank? The question of how long fuel will last you depends on factors like how warm you want your home and how big your home is. In general, however, five to ten gallons of diesel or kerosene will last you around one to two days.
Does an oil furnace need a return line?
Things You’ll Need The two-line fuel system on an oil-fired furnace consists of a supply line and a return line. The supply line delivers fuel oil from the holding tank to the fuel pump. The return line sends excess oil not used by the furnace back to the oil tank.
Why do they poke holes in grass?
Aeration involves perforating the soil with small holes to allow air, water and nutrients to penetrate the grass roots. This helps the roots grow deeply and produce a stronger, more vigorous lawn. The main reason for aerating is to alleviate soil compaction.
What is a deaerator tank?
Deaerators are mechanical devices that remove dissolved gases from boiler feedwater. Deaeration protects the steam system from the effects of corrosive gases. The deaerator consists of a deaeration section, a storage tank, and a vent.
What is foaming in boiler?
Bubbles or froth actually build up on the surface of the boiler water and pass out with the steam. This is called foaming and it is caused by high concentration of any solids in the boiler water. Priming may be caused by improper construction of boiler, excessive ratings, or sudden fluctuations in steam demand.
