QA

What Is Ceramic Disc

How Does Ceramic Disc Technology Work? Ceramic disc cartridges are simply two ceramic discs with holes through them. One disc is fixed in place whilst the other moves with the tap handle. When both discs are in alignment, the water is allowed to flow through the tap. When they are no longer aligned, the water stops.

Are ceramic disc taps any good?

Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.

What is a ceramic disc cartridge for faucet?

Ceramic disk faucets are the latest development in modern faucet technology. The disk faucet mixes hot and cold water inside a mixing chamber called a pressure balance cartridge. Two ceramic disks at the bottom of the chamber will raise and lower to control the volume of water flow.

Do ceramic disc taps wear out?

Ceramic disc taps are designed to last a lifetime. Unfortunately, in hard water areas they do not and it is as well to know how they operate and how to service them. It is very rare for the ceramic discs to wear out and the need to replace them is even rarer.

Why does a ceramic disc tap leak?

Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.

How long do ceramic disc taps last?

How Long Do Ceramic Disc Cartridges Last? A lifetime. But it depends on the hardness of your water (contact your water provider), and the quality of the tap itself. A cheap tap, even with ceramic discs, is going to wear down over time.

How long do ceramic tap washers last?

Ceramic tap washers can last years, but other types can last for as little as twelve months depending on how frequently they’re used.

How does a disc faucet work?

Ceramic Disc Faucet Two ceramic discs regulate the flow of water: a movable upper disc turns or lifts and lowers against a fixed lower ceramic disc. The seal between the two discs is watertight because they are polished to near-perfect flatness.

What does a cartridge do in a faucet?

The cartridge is a plastic piece in your faucet that controls water flow. Replacing the bathroom faucet cartridge is a plumbing fix you can do in less than an hour. This guide will teach you how to replace a faucet cartridge using a few simple tools.

How do I know what faucet cartridge I need?

Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (Lengths range from 1–12). Next, identify the broach pattern with the broach chart (see page B-5).

Why do tap cartridges fail?

What is a ceramic disc cartridge? It is not usually the ceramic tap cartridges themselves that fail, however, as these tap cartridges are incredibly durable and designed to last a lifetime. Rather, it is the inlet or outlet seals falling apart or the build-up of sediment within them that creates leakages.

How long do bathroom taps last?

Most generally last for 15-20 years. If yours is nearing the end of its lifespan, it might be time to consider a replacement. If your faucet constantly needs repairs. One of the most common signs that it’s time to replace your faucet is when it needs constant repairs to function.

Why is my tap leaking at the base?

When it becomes worn or cracked, water can seep down along the faucet body and out the bottom when the valve is turned on. Less commonly, leaks in this area can be caused by an inner cartridge that has become worn. If fixing the O-ring doesn’t help, you may need to replace the valve cartridge, as well.

Do ceramic taps have washers?

Nowadays, the vast majority of modern bathroom taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off. Back in days of old, taps and shower fittings always used rubber washers to prevent dripping.

What is the best type of tap washer?

Nylon tap washers are a popular option for sealing tap valves closed. Due to their properties, nylon spacer washers provide a reliable seal on most types of tap. Typically, nylon sealing washers are chosen for offering: High strength.

How do I fix my compression faucet?

Instructions Shut off the Water Supply. Remove the Faucet Handle. Remove the Valve Stem Assembly Cover (as needed) Remove the Valve Stem Assembly. Remove the Stem Washer. Find a Replacement for the Old Washer. Reassemble the Faucet.

How do shower cartridges work?

A shower cartridge works because it’s connected to the handle. When you pull the handle to turn on the water and adjust the temperature, the cartridge slides forward, allow hot and cold water to mingle and flow together towards the shower head.

How does a single lever faucet work?

A ball faucet, commonly used in kitchen sinks, has a single lever controlling a slotted ball that aligns with the cold and hot water. Regulate the water pressure by raising the lever, which lifts the ball to let the water through. The temperature is adjusted by moving the lever from side to side.

How do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.

Can a bad faucet cartridge cause low water pressure?

Clogged aerators and clogged cartridges are two of the most common causes of low water pressure in a sink. The aerator is the tip of the faucet that the water comes out of, while the cartridge is found underneath the sink handle and enables you to stop and start the flow of water.

How do you know if your shower cartridge is bad?

How to tell if your shower cartridge is bad: Dripping or running water when you turn your shower off (most common) Difficulty turning the shower handle, which worsens over time. Shower handle gets stuck or “slips” and doesn’t turn on the water.