Table of Contents
Flocculation is a water treatment process where solids form larger clusters, or flocs, to be removed from water. This process can happen spontaneously, or with the help of chemical agents. It is a common method of stormwater treatment, wastewater treatment, and in the purification of drinking water.
What is flocculation process?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Step 1: Coagulation. Small particles usually carry negative surface charges that hinder aggregation and settling (1a).
What is coagulation and flocculation in the water treatment process?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
Why is flocculation important for treating water?
Conventional coagulation–flocculation-sedimentation practices are essential pretreatments for many water purification systems—especially filtration treatments. These processes agglomerate suspended solids together into larger bodies so that physical filtration processes can more easily remove them.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is flocculation of soil?
Definition. Flocculation – process during which particles, for example, of a soil, dispersed in a solution contact and adhere each another, forming clusters, flocks, flakes, or clumps of a larger size. Flocculation is synonymous with agglomeration and coagulation.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
Is flocculant hazardous?
This material is not considered hazardous under the OSHA Hazard Communication Standard (HazCom 2012). None known. General advice : No hazards which require special first aid measures. If inhaled : If breathed in, move person into fresh air.
What is flocculant for?
Used in a wide range of industries and applications, flocculants help to remove suspended solids from wastewater by aggregating contaminants into flakes or “flocs” that float to the surface of the water or settle at the bottom. They can also be used for lime softening, sludge thickening, and solids dehydration.
How is chloride removed from wastewater?
At high concentrations, chloride can harm fish and plant life. But there’s no easy and affordable way to remove chloride in wastewater. It would require reverse osmosis, the same process used to produce water for laboratory use, which is technically difficult as well as costly.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
Can you add too much flocculant?
Adding too much flocculant can cause its own issues. Flocculant is aluminum sulfate, which is designed to clump with the particles you’re trying to remove. But if you add too much, the flocculant will start to agglomerate with itself instead of those particles.
Why do we use flocculation?
4 Flocculation. Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
Is Salt a flocculant?
5.1. Inorganic salts of multivalent metals are effective flocculants. The multivalent metal cations in these salts neutralize the cell surface charge and bridge cells together to facilitate flocculation [15, 66].
What is the difference between coagulant and flocculant?
Flocculation is synonymous with agglomeration and coagulation / coalescence. Basically, coagulation is a process of addition of coagulant to destabilize a stabilized charged particle. Meanwhile, flocculation is a mixing technique that promotes agglomeration and assists in the settling of particles.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
