Table of Contents
A door jamb runs vertically along the side of the door. It helps provide support for the door panel and door frame. What is the piece at the bottom of the door called? The piece at the bottom of a door is called a sill.
What are parts of a door called?
The body of any door is essentially made of three main parts: the stiles, rails and panels but there are many more elements. To help explain the most common terminology, here we have put together an illustration of a standard door and door frame, with the component parts highlighted.
What is the trim at the bottom of a door called?
Plinth Block: A decorative block of wood that is thicker and wider than a door casing and used as part of the door trim at the base to enhance the appearance. Plinth block is also called a base block, foot block or pilaster block.
What are the parts of a door latch?
Parts of a Door Lock Knobs and Handles. The common door lock will have two knobs or handles—one on the inside of the door and one on the outside. Rosette. The rose or rosette is typically a round plate that serves two functions. Lock Cylinder. Spindle. Latch Assembly and Spring Bolt. Deadlocking Plunger.
What is the inside part of a door called?
1. Door jamb. Door jambs are the interior sides of the doorframe. The word “jamb” comes from the French word jambe, which means “leg” – and door jambs are sometimes also called the “legs”.
What is floor trim called?
Baseboard is the trim that defines where the floor ends and the wall begins. Baseboard is usually thinner than door trim, which is called casing, and at least one-third wider.
What is a door latch?
Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.
What are the parts of a door frame?
Door part names Door frame. The door frame is the entire framework supporting the door, including the sill, jamb and head. Sill. The door sill is the very bottom part of the door frame that rests on the floor. Jamb/door jam. Head. Panel. Astragal. Fixed panel. Door sweep.
What are parts of a door knob called?
The main parts of a door lock are the cylinder, bolt, box and strike plate.
What are the parts of a door bolt called?
The Anatomy of Door Locks Traditional and electronic locks. The Cylinder: Also called the body, this is the part where the key is inserted. The Bolt: Also called the latch, the bolt engages the inside of the door. The Box:The bolt extends from the cylinder into a hole that is designed to fit the bolt perfectly.
What is a passage door knob?
Passage door knobs are similar to dummy door knobs. They don’t lock but are used to open doors and go between rooms. Passage door knobs are ideal for interior hallways, closets and other rooms that don’t need privacy locks. They’re also called unkeyed knobs.
What is a door casing?
What is casing? Quite simply, it’s a moulding profile which frames (or trims) a door or window. Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.
What is the hole in the door frame called?
Bore holes are the holes in the door that house your door hardware and allow it to be installed. The cross bore is the main hole drilled into the face of the door where the body of the lock (chassis) is installed.
What is floor base?
In architecture, a baseboard (also called skirting board, skirting, wainscoting, mopboard, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor.
What are baseboards and trim?
Baseboard is the wood (or other material) board that runs between the floor and the wall. Trim is a broad term that encompasses baseboard and other trim throughout the home.
Is door trim the same as floor trim?
Door casing, or trim molding, is the decorative edge around a door frame. Door and window trim are usually the same within a room. This creates a visual flow and helps the aesthetics of the room. Baseboard is the decorative trim around the base of walls in rooms, hallways, and foyers.
What is a sliding latch called?
Slam Latch: Slam latches are also known as push-to-close latches. They are used for doors that require automatic latching when closed. Their design uses cams instead of bolts for latching onto the striker or door frame. When actuated, the cam moves either by turning or sliding.
What is a locking door knob called?
Deadbolt. A deadbolt is a locking mechanism that mounts much like a door knob. Most exterior doors are locked with a door knob, and also a deadbolt.
What are the different types of latches?
Types of Latches Cam Latch. Cam latches are a simple, cost effective latch type that engineers can utilize in their application. Compression Latch. Push-to-close/ Slam Latch. Draw Latch. Sliding Latch.
What is a door sash?
A sash door is a door that is partly constructed of glass and the door sash refers to the glass part of that door. The sash may include a single pane of glass or a collection of smaller panels. Sash doors are becoming increasingly popular for their ability to bring natural light and fresh air into closed off spaces.
What is a door cylinder?
The cylinder is the locking mechanism of an entry door set. It may be integrated with a the deadbolt of a mortise lock or mounted independently as part of a separate deadbolt. One can secure the door from inside, as well as exit the house without a key, making this the most popular option.
What are door bolts?
Door bolts are the bracket-secured components that slide across doors to reinforce locks and provide additional security measures. They are morticed on the edge of the door to which they are fitted – a mortice is a type of secure joint.
What is a necked bolt?
A necked (or cranked) barrel bolt is perfect solution for additional home security when on a budget. It is simple to use but highly effective and can be used on any door or window in the house. Depending on the application where a necked bolt maybe unsuitable then a straight barrel bolt boIt can be used.
