Table of Contents
Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.
How deep is a counter-depth refrigerator?
Your counter-depth measurement should be about 24-25 inches. This dimension is equivalent to the depth of the refrigerator box, excluding the refrigerator doors and handles.
What is the difference between standard depth and counter-depth?
standard depth refrigerators is depth dimension. Counter depth fridges fit nearly flush with your cabinetry, but measure smaller in depth than standard size fridges. For certain counter depth models, a larger width and height make up for some lost storage.
Why are counter-depth refrigerators so expensive?
Counter-depth refrigerators are less popular than standard-depth refrigerators, which can impact the unit-level price. Manufacturers often use thicker, more expensive insulation materials to maximize interior space. This contributes to their higher price.
How far is too far for a refrigerator to stick out?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Are counter depth refrigerators wider?
With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.
Do counter depth refrigerators have less space?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
Should refrigerator be flush with cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What is the difference between a regular refrigerator and a counter-depth?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
What is counter-depth installation?
A “counter-depth” or “cabinet-depth” appliance is one designed so that the appliance is roughly the same front-to-back depth as the countertops and base cabinets. It’s also an option for other kitchen appliances that typically jut out past the face of the countertops.
How far should a refrigerator be from the back wall?
The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge. Subtract the minimum clearance from initial space measurements to find the maximum dimensions of the refrigerator models you can consider.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
Do refrigerators come in 24 inch depth?
If you’re dealing with a kitchen full of tight corners, the depth of a refrigerator is just as important as its width. What you need is a slender 24-inch wide counter-depth fridge; counter-depth meaning 24 to 29 inches deep (to stand flush with standard 24- and 25-inch cabinets).
Do refrigerators have different depths?
If you’ve shopped for appliances lately, chances are you’ve encountered rows of standard-depth refrigerators. These models can range in depth from 30 to 34 inches in depth, compared to the 23 to 27 inches seen with counter-depth refrigerators.
What is standard kitchen counter-depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
What is a French door on a refrigerator?
French door refrigerators have one continuous refrigerator space on top accessed by two doors, with a freezer drawer below. Both models tend to come with a wide range of features such as exterior ice and water dispensers, adjustable shelves and door bins, along with higher-end finish options.
Which counter-depth refrigerator has the most space?
KitchenAid KFRC704 KitchenAid model KRFC704’s massive 23.8 capacity is one of the largest available in a counter-depth refrigerator and actually rivals capacities of many standard depth options.
