Table of Contents
The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.
What is the little triangle on a tape measure?
Tape measures often use small, black diamond or triangle shapes called black truss marks. They indicate truss layouts of every 19 3/16 inches. This spacing is often used by some engineered joist manufacturers. There are 5 of these marks for every 8 feet.
What are the red numbers on a tape measure?
As you extend the tape measure, you’ll probably see the numbers 16, 32, 48, 64, 80, 96 and so forth in red. The red indicates 16-inch-on-center spacing. This is a common framing spacing for wall studs, floor joists and common roof rafters.
What is M on a measuring tape?
On many tapes (but by no means all) you will find a small red rectangle with the letter M printed inside followed by a number. The number simply denotes the year that the blade was stamped as conforming to the Measuring Instruments Directive. On the whole this will also be the year in which that tape was manufactured.
What does the Black Diamond mean on a measuring tape?
The black diamonds which appear every 19 3/16” on metal tape measures are for spacing I-beam “timbers.” Several wood-product manufacturers offer I-beam “timbers” as a substitute for solid lumber floor joists. The diamond marks on tape rule blades are for spacing these engineered floor joists in new construction.
Why is a tape measure yellow?
Tape measures often have black and red measurements on a yellow background as this is the optimal color combination for readability.
What is the 8-foot rule?
It’s called the 8-foot rule. A leader at a manufacturing facility recently gave the direction to his leadership team to engage with their employees every time they come within eight feet of one of their employees. It’s a simple rule that is simply brilliant!Aug 1, 2013.
What is the 8-foot rule on a tape measure?
For every 8-foot section of your wall, there should be six studs placed 16 inches apart. That’s why there are red numbers highlighted every 16 inches. If you use the tape measure, you can note exactly where the studs are by using the red numbers and marking the studs using a pencil.
What is the maximum length of a long line tape?
They are available in fractional/decimal formats and lengths ranging from 50 ft to 200 ft making them ideal for many long distance measuring jobs.
What is the second smallest line on a tape measure?
The eighth inch markings are the second shortest markings. Two eighth inches equal one quarter.
How many 16th are in an inch?
In this case, there are 16 units of smaller quantity (1/16 inch) in one unit of the larger quantity. Multiply the larger-quantity amount by the number of smaller units per unit of the larger quantity. Multiplying 16 by 0.5 gives you 8, so 8/16 equals 0.5 inches.
Can you measure your shoe size with a tape measure?
1) FIND YOUR SHOE SIZE: Using a tape measure or ruler, measure the distance from the back of your heel to the end of your longest toe (in mm). Most people have feet of different sizes and the length of your longest foot should determine your shoe size.
Are mm on a tape measure?
If you have a metric tape measure, the numbers should be read like this: The large, numbered markings are centimeters. There is a smaller marking exactly halfway between the centimeters for ease of reading. The smallest markings are millimeters, or one tenth of a centimeter.
What does 19.2 mean on a tape measure?
Support. The black diamond marks every 19.2″ on our tape rule blades. This is for spacing of engineered joists common on job sites. The 19.2 inches allows for a break at 8 foot to accommodate full sheets of plywood.
Why are there 16 inches on a tape measure?
Note the Marks for Studs and Joists Tape measures usually have a red mark every 16 inches. This makes it convenient to mark off wall studs or joists, which typically are 16 inches apart.
What do the symbols on a tape measure mean?
The black diamonds on the tape measure represent that spacing. The first black diamond is at 19.2 inches” and after that black diamonds appear at 38.4, 57.6, 76.8, and 96 inches or 8 feet. That is one less stud for every 8 feet of wall, counting the beginning and end studs.
Can a tape measure cut you?
A tape measure can’t cut off a finger like a table saw or puncture your body like a nail gun, but it comes with some safety considerations you need to observe. Tape measures can cause injuries when used improperly, and they can damage breakable items in your home.
How fast does a tape measure retract?
In a vacuum, objects accelerate to 9.8 meters per second per second thanks to gravity. But the tape measure was not falling in a vacuum.Parts and materials: Falling object Accepted disabling claims Wallboard, drywall, sheetrock 1.
What is the most accurate tape measure?
Class 1 tapes are the most accurate tape measures on the market. Ideal for precision trades and sensitive industries, they also delivery great value for money.
What is the 5 foot rule?
The rule dictates that when a staff member is 10 feet from a guest, the staff smiles and makes direct eye contact, and when they are within five feet, the staff verbally greets the guest. Applying this principle to nursing homes is a simple, inexpensive way to enrich patient and staff lives.
