QA

Question: What Is The Difference Between 215 60R16 And 215 65R16 Tires

Can I use 215 65R16 instead 215 60R16?

Registered. I wouldn’t do it, if only because of the load capacity rating difference. The P215/65R16 has a load capacity rating of 96, whereas the P215/60R16 has a load capacity rating of 94. Stay safe with tires.

Can I use 60 instead of 65 tires?

Physically, yes they will fit. It is recommended to stay within 3% of the original tire size on the car though. The size you have is 3.09% smaller, so not recommended. You could go with 205/60-15 though if you can get a better deal on that size.

What is the meaning of 215 65 R16?

P – Passenger vehicle tire. 215 – This number specifies the width in millimeters (i.e. 215 mm) 65 – This number is the Aspect Ratio, the ratio of sidewall height to width. R – Radial. 16 – This number designates the tire’s diameter in inches (i.e. 16″).

Can 205 65R16 replace 215 60R16?

Yes you can use but for a very short period of time. As the vehicle might bubble at times on rough roads. The tyre will dispose off early as the car will not be in a balanced position. But for a short interval or in case of emergency you can use it.

Are 205 and 215 tires interchangeable?

Visually, probably not. You also have to remember that one tire manufacturer’s tread width on a 205 tire is not the same as another. So one brand’s 205 may be the same width as another brand’s 215. Use tire rack to check the tread widths on the tire.

Can I use 225 60R16 instead of 215 60R16?

They’ll work fine. The difference between a 215/60 and a 225/60 isn’t enough to cause any problems. Your speedo will read a little fast but maybe that’ll help keep you from getting speeding tickets. Actually, going from a 225/60R16 to a 215/60R16 is a change in both diameter and sidewall.

What’s the difference between 60 and 65 on tires?

The 65% aspect ratio (as in 235/65/17), compared to 60%, adds almost 12 mm (1/2″) to the radius of the tire (0.65-0.60)*(235mm)=11.75mm.

What does 65 R mean on tires?

Aspect Ratio: 215/65 R15 “65” in the sequence is the aspect ratio of the tire. The aspect ratio is a percentage, and it tells you the ratio of the tire’s height to its width. In this example, the aspect ratio number “65” means that the tire’s height is 65 percent of its width.

What does 60 mean on a tire?

60 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 60 means that the tire’s section height is 60% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.

What does 215 60r16 95V mean?

Here’s what it all means, using the code for the tested size, P 215/60 R16 95V and 95H: P Passenger tyre. 215 The section width (in mm), which is the distance between the tyre’s exterior sidewalls when the tyre is fitted to the recommended rim, inflated to the recommended pressure, and not under load. 60.

Can I use 215 60r17 instead of 215 55r17?

Can I use 215 60r17 instead of 215 55r17? It won’t be a problem from a safety standpoint. The only difference you might see is a speedometer error. You will notice more difference from the tire construction than the tire size.

What size is a 215 60r16?

Tire Size Calculator – Tire & Wheel Plus Sizing BETA Unit: Imperial Imperial Metric Section Width 8.46 in Rim Diameter 16.00 in Rim Width Range 5.50 in – 8.50 in Overall Diameter 26.16 in.

What’s the difference between 215 and 205 tires?

The diameter of the 205 is 26.3 inches and for the 215 the diameter is 26.7 inches. That is 0.4 inches of difference meaning that it would raise the height of the trailer by 0.2 inches. This will not only help with the height but also help to prevent over heating which is why many trailer tires fail.

Can I use 205 60R16 instead of 195 60R16?

205/60R16 has a ~5% larger diameter than your 195/60R16. Assuming that they fit in your wheel arches, here are the effects you should be looking at: Your speedo will be off. You’d be driving 5% more than what it reads.

How tall is a 235 60R16 tire?

5.55 in Unit: Imperial Imperial Metric Rim Diameter 16.00 in Rim Width Range 6.50 in – 8.50 in Overall Diameter 27.10 in Sidewall Height 5.55 in.

What happens if you put different size tires on a car?

This applies to switching to both smaller and larger tires. Changing to larger tires with an improper sidewall height can cause damage to your vehicle’s suspension system, wheels, and the tires themselves, and can run the risk of incorrect speedometer readings.

Can 205 75r15 replace 215 70r15?

Will an ST205/75-15 Trailer Tire Fit the Same Wheel as a 215/70-15 Tire. A 205/75-15 tire will fit as long as the wheels are 5 to 6-1/2 inches wide (inside where the tire rides).

Can you put 2 different size tires on your car?

Long story short: Yes, it is a problem to have two tires of different sizes on the front (or back) of your car. Having two different-sized tires on the same axle is generally not a good thing. Sometimes, people choose to put larger tires on the rear axle of their vehicle for handling reasons, cosmetic reasons, etc.

Are 225 and 215 tires interchangeable?

215 vs 225 Tires: Rim Diameter Their rear tires have a larger diameter compared to the smaller diameter in their front wheels. Based on this explanation, you are likely to find 215 tires changing roles with 225 tires on different vehicle types because the 215 tires have smaller diameters than the 225 models.

Can I use 225 60r17 instead of 225 65r17?

Registered. Yes, the heavier 65s will be more weight per corner and therefore will reduce gas mileage and acceleration slightly, and the speedo will be slightly off. The main advantages are a cushier, softer, smoother ride with more “suspension”/air cushion in the tire sidewall height.