Table of Contents
Standard Depth: Which Refrigerator is Right For You? The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity.
Is counter-depth or standard depth better?
If you need to conserve space for a better flow in your kitchen, go with a counter-depth. If you have a large family, though, we recommend regular-depth to ensure you’ll have plenty of space to meet your daily needs. Meanwhile, avoid costly mistakes by carefully measuring your space.
Is a counter-depth fridge worth it?
When Counter Depth Refrigerators Are Worth It This is a great way to save 6″ of floor space. Counter depth french door refrigerators amplify the benefits, because the half-width doors are much shallower when open. More fridge space can actually be a drawback in small households.
Do you lose space with a counter-depth refrigerator?
By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.
Why is counter-depth more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
How far should a refrigerator stick out from cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What is the depth of a typical kitchen counter?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar.
What is the difference between standard and counter-depth refrigerator?
Standard Depth: Which Refrigerator is Right For You? The main difference between counter depth and standard depth refrigerators is dimension. Counter depth fridges are shallower to achieve a built-in appearance while standard fridges generally offer more capacity.
What is the best month to buy appliances?
September and October: The best time to buy most major appliances is during the months of September and October. During these two months, manufacturers unveil their latest models. This means that the previous year’s models must be discounted in order to make room for the new models that will hit stores in the winter.
Are counter-depth refrigerators wider?
With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.
How far does a counter-depth fridge stick out?
A counter-depth refrigerator is designed to offer similar storage capacity as a regular, full-size refrigerator in a style that generally doesn’t stick out more than an inch or two past your kitchen counters and cabinets. Counter-depth refrigerators are typically under 30 inches deep.
Is Frigidaire a good brand?
According to the community survey website Ranker, consumers have Frigidaire ranked as the best appliance brand by a wide margin. Their side-by-side refrigerators have been recognized by Consumer Reports as exceptionally reliable. Frigidaire’s offerings are both basic/easy to use and price-friendly.
How deep should my fridge be?
Step 3: Measure for refrigerator depth To determine refrigerator depth, measure from the wall to the edge of your countertop. These dimensions should be roughly 24 to 25 inches deep.
How much space do you need above a refrigerator?
Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation. When you measure the space for the refrigerator, and compare it to the size of the refrigerator, leave at least 1 inch of extra room for the back and the top of the refrigerator.
What is the cubic feet of counter-depth refrigerator?
Capacity for a counter-depth refrigerator runs anywhere between 15 and 25 cubic feet, with an average of about 22 cubic feet.
What refrigerator has the smallest depth?
Above: The Liebherr 36-Inch Counter-Depth 4-Door French Door Refrigerator (CBS2082) is the most shallow on our list at 24 inches deep.
Will a 36 inch refrigerator fit in a 36 inch opening?
Usually! A 36″ refrigerator is designed to fit into a 36″ finished opening!! A 36 inch wide refrigerator should only be placed in an opening at least as wide as the manufacturer’s recommendation. Remember that appliances are NOT built to machine-shop tolerances and neither are cabinets.
How much space should be between kitchen island and counter?
Distance Between Island and Counter Recommended distance between kitchen work areas, which can include both perimeter countertops and kitchen islands: 42 inches minimum in a single-cook kitchen. 48 inches minimum in a kitchen where more than one cook may be working.
How much should a countertop overhang?
How far should a countertop overhang on the side? Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How is quartz countertop sold?
Some quartz makers sell exclusively through big-box stores; other slabs are available only through independent kitchen and bath showrooms.
How thick should my countertop be?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
