Table of Contents
A transformer transfers electrical power from one circuit to another without changing the supply frequency, i.e. it only step-up or step-down the level of voltage and current, whereas induction motor converts electrical power into mechanical power.
In what ways induction motor and transformer are similar?
The Induction motor is similar as a Transformer with a rotating short-circuited secondary. The stator winding in induction motor corresponds to the primary winding in the transformer and the rotor winding in induction motor corresponds to the secondary winding in the transformer.
Why is transformer used in induction motor?
Induction motor is a generalized transformer. In transformer the flux produced is time alternating and not rotating. There is no air gap between primary and secondary of transformer where as there is a distinct air gap between stator and rotor of motor which gives mechanical movability to motor.
Can we use induction motor as transformer?
An induction motor is a well-known device which works on the principle of transformer. That is, when an EMF is supplied to its stator, then as a result of electromagnetic induction, a voltage is induced in its rotor. So an induction motor is said to be a transformer with rotating secondary.
Is a motor a transformer?
A motor is an extended version of a transformer. Here we can introduce the analogy between a transformer and a motor that is a motor is like a transformer with a moving secondary. The primary that is not moving is called stator and the secondary that is moving is called rotor.
What are types of induction motor?
Types of Induction Motors Split Phase Induction Motor. Capacitor Start Induction Motor. Capacitor Start and Capacitor Run Induction Motor. Shaded Pole Induction Motor.
What is the function of induction motor?
An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding. An induction motor can therefore be made without electrical connections to the rotor.
What is the efficiency of induction motor?
Efficiency of three-phase induction motors can vary from 85% to 96%. See the chart below for torque vs. slip. Induction motors of 50-100 HP for industrial applications vary in weight from 700 to almost 1,000 lbs.
What is the emf equation of a transformer?
Therefore, RMS value of emf per turn = 1.11 x 4f Φm = 4.44f Φm. This is called the emf equation of transformer, which shows, emf / number of turns is same for both primary and secondary winding. For an ideal transformer on no load, E1 = V1 and E2 = V2 .
What are the types of losses in transformer?
Types of Losses in a Transformer Iron Losses. Hysteresis Loss. Eddy Current Loss. Copper Loss Or Ohmic Loss. Stray Loss. Dielectric Loss.
What is no load test of induction motor?
The no-load test approximates the stator circuit (Rs and Xs1) and magnetization branch parameters(Xm) of an induction machine. The machine is brought to its rated speed by applying rated three phase volt- age at the stator (Vnl). Corresponding no-load current (Inl) and no-load real power input(Pnl) are recorded.
Why synchronous motors are not self starting?
Above a certain size, synchronous motors are not self-starting motors. This property is due to the inertia of the rotor; it cannot instantly follow the rotation of the magnetic field of the stator. Once the rotor nears the synchronous speed, the field winding is excited, and the motor pulls into synchronization.
What is slip in induction motor?
“Slip” in an AC induction motor is defined as: As the speed of the rotor drops below the stator speed, or synchronous speed, the rotation rate of the magnetic field in the rotor increases, inducing more current in the rotor’s windings and creating more torque. Slip is required to produce torque.
What is the working principle of transformer?
A transformer operates on the principle of electromagnetic induction. It has a magnetic core over which two sets of windings, termed as primary and secondary, are suitably placed. When one of the windings is connected to an AC supply, an emf is induced on the other winding which is proportional to the number of turns.
What does a transformer change?
Transformers change the voltage of the electrical signal coming out of the power plant, usually increasing (also known as “stepping up”) the voltage. Transformers also reduce (“step down”) the voltage in substations, and as distribution transformers.
What are parts of transformer?
There are three basic parts of a transformer: an iron core which serves as a magnetic conductor, a primary winding or coil of wire and. a secondary winding or coil of wire.
What are the 2 types of induction motor?
Single-phase induction motors and three-phase induction motors are the two main types of induction motors.
What are the two main types of induction motor?
Induction motors are classified into two types namely single phase induction motor and three-phase induction motor. As their name suggests, a 1-phase induction motor is connected to a single-phase AC power supply whereas the 3-phase induction motor can be connected to a three-phase AC power supply.
What are the main parts of induction motor?
Parts of Induction Motors Stator. The stator is the stationary portion of the motor and delivers a rotating magnetic field to interact with the rotor. Rotor. The rotor is the central component of the motor, and is fixed to the shaft. Shaft. The motor shaft is fixed within the rotor, and rotates with it. Bearings. Casing.
How does an induction motor start?
When the supply is connected to the stator of a three-phase induction motor, a rotating magnetic field is produced, and the rotor begins rotating and the induction motor starts. At the time of starting, the motor slip is unity, and the starting current is very large.
What is the working principle of induction motor?
Working Principle of Induction Motor The motor which works on the principle of electromagnetic induction is known as the induction motor. The electromagnetic induction is the phenomenon in which the electromotive force induces across the electrical conductor when it is placed in a rotating magnetic field.
Can induction motor run at synchronous speed?
So, theoretically, the Induction motor can never run at synchronous speed. But due to the reduction of speed, again lag influx will be achieved, and the motor will continue to move at this speed due to flux difference between rotor and stator. In short, an induction motor cannot run at induction speed.
