QA

Question: What Is The Kv Rating On Brushless Motors

The Kv rating of a brushless motor is the ratio of the motor’s unloaded rpm to the peak voltage on the wires connected to the coils. Kv allows you to get a handle on the torque that can be expected from a particular motor. Torque is determined by the number of winds on the armature and the strength of the magnets.

Is higher Kv better?

Generally speaking the more Kv a motor has, the more RPM and more power. A higher turn number means more wire and thus more resistance, resulting in a slower motor. So turns with a lower number means a faster motor. The turn rating is inversely proportional to the power generated by the motor.

How do I choose a Kv motor?

Choosing the correct KV is very important, it’s critical for the motor operation and high motor performance which is critical for the project. There are few things that determine the top speed: Battery voltage, gear ratio (if any), wheel size ( if any) and the motor KV.

What does 1000Kv motor mean?

So a Kv rating for motor tells the number of revolutions per minute (RPM) when a given volt is supplied. Suppose if you are having a motor with 1000Kv rating it means that it will produce 1000 RPM when 1 volt is supplied.

How are Kv brushless motors measured?

The formula to calculate Kv for a brushed DC motor is to just divide the speed by the generated DC voltage that you measure using your multimeter. Another option for brushless motors is to buy a BL motor tester that will calculate Kv for you.

How many Kv is a 8.5 turn motor?

A 5000 KV motor is a 5000 KV motor. A Novak 8.5 “turn” is rated at 5000 KV but another manufactures 8.5 may be different as most do not post their KV rating.

What does 2300kv mean?

2300kv represents the rpm of the motor per volt applied to the motor. The motor will spin at 2300 rpm with 1 volt applied. If you apply 10 volts, your motor will spin 23,000 rpm.

How do I choose the right ESC?

Current Rating. The first thing to look at when choosing ESC is the current rating, which is measured in Amps. Motors draw current when they spin, if you draw more Amps than your ESC can handle, it will start to overheat and eventually fail. A catastrophic failure can even end up with your ESC in flames!Feb 1, 2020.

What does 12T mean on RC Motors?

Twelve turns around each motor pole using triple wires. Three wires are would twelve times around the pole. A 12T double would use two wires wound twelve times and a 12T single a single thicker wire wound twelve times around each rotor pole.

Does lower Kv mean more torque?

Torque is determined by the number of winds on the armature and the strength of the magnets. A low Kv motor has more winds of thinner wire—it will carry more volts at fewer amps, produce higher torque, and swing a bigger prop.

What does A2212 mean?

A2212/6T: It means 22mm motor diameter, 12mm motor shaft height and 6 turns per pole. Specifications. Number of Cells: 2-3s lipo; 6-10 cell NiMh (2V to 12V) Max Efficiency: 80%.

How do I choose a brushless motor?

The physical size of a particular brushless motor is usually indicated by a number that looks like this – ’22-05′. The first number, 22, indicates how wide the motor is whilst the second number, 05, indicates the hight. Usually, these are written on the motor casing themselves to show you how wide and high they are.

How do you calculate Kv to RPM?

To estimate the RPM of a motor, simply multiply the Kv value by the battery voltage. Kv is in units of RPM/Volt.

How do you calculate Kv from current?

For example; 1000 Kv Motor with 14.8v LiPo battery provides 1000 x 14.8 = 14800 Unloaded RPM. 2200 Kv Motor with 11.1v LiPo battery provides 2200 x 11.1 = 24420 Unloaded RPM. 220 Kv Motor with 37v LiPo Battery provides 220 x 37 = 8140 Unloaded RPM.

How do you calculate Kv?

Flow Calculation – (Kv) Kv = m3/h – Flow coefficient. Q = m3/h – Flow. Qn = m3n/h – Normal flow (20°C 760mm Hg) P1 = bar – Inlet pressure – (Gauge pressure + 1) P2 = bar – Outlet pressure – (Gauge pressure – 1) DP = bar – Pressure drop – (Differential pressure between inlet and outlet pressure).

What size kV motor for 1/10 buggy?

IMO, it’s usually a safe bet to start with a 10.5 or 13.5 Motor.

What is a 540 size motor?

Any motor shorter or equal to 50 mm is called a 540 motor. A bit longer than 53mm are 550mm motors. Almost all 540 motors are a maximum of 53mm in length and so they are almost the same size.

How many turns is a castle 4600kv?

11 turn Technical Specs Input Voltage Range: 2-3S LiPo Kv: 4600 Max. RPM: 100,000 Size: Length: 49.5mm Diameter: 36mm.

What is the fastest brushless RC motor?

“The Traxxas XO-1 is the fastest RC car, full stop. The largest brushless motor on offer propels the car from 1 to 60 in 2.5 seconds. Not only is this car stylish, but it also reaches speeds over 100 miles per hour.”Oct 29, 2020.

How do you choose the ESC on a brushless motor?

Now, we will learn all these factors one by one, Current Rating. The first thing to consider when selecting an ESC is the current rating or ampere rating. Input Voltage Rating. Weight and Size. ESC Firmware. With or Without BEC. Connection of ESC with motor. ESC Protocols. ESC Processors.