Table of Contents
Puddle length: The longest and most formal type of curtains, puddle length typically means 108 inches or more. This look is often seen in living rooms, formal sitting areas or in homes with high ceilings.
Are there curtains longer than 108 inches?
The 108-inch length for curtains is a popular choice for window treatments. Curtains are available in other lengths as well, which include 63, 84, 95, and 120 inches.
What’s the longest curtain rod length?
240 inch curtain rod Material: Metal. Rod Diameter: 0.63”.
What length should curtains be?
How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.
What is 72 drop curtains in CM?
Measuring Guide Standard ready made curtain drop in Inches 46″ 72″ Standard ready made curtain drop in Cm 117cm 180cm.
How many panels of curtains do I need?
Divide your total by the width of a single curtain panel to get the number of panels you need. ~ Multiply window width by 2.5 to 3 if you want curtains tightly gathered for a full, luxurious look. Divide your total by the width of a single curtain panel to get the number of panels you need.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How long can a curtain rod be without a middle support?
A center bracket is needed in almost any length greater than 5 to 6 feet, if you want to avoid any sagging. However there are “C” rings that will go over the bracket so that the drapes/curtains can be pulled to one side (either side, in fact).
Are 84 inch curtains long enough?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
How far should a curtain hang from the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
Is it OK if curtains don’t touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
Can you get curtains in a 66 inch drop?
When we list or write curtain measurements, the width always comes before the drop. Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches). You should choose the width that most closely matches the size of your track or pole.
What size curtains do I need for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How wide should curtains be for 70 inch window?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
Should I use one or two curtain panels?
Yes, you can use just one curtain panel. This is sometimes called single panel curtains. Individual panel curtains work exceptionally well for sliding doors or smaller windows. Most people consider two curtain panels to have a “fuller” or a more finished look, but using a single panel gives a room a unique feel.
Why are curtains sold as one panel?
Curtain panels are sold as individual panels because there are some instances in which a person only needs one panel. Moreover, the common style for hanging curtain panels is to split them down the middle and have one panel hang to the left of the window and the other to the right for a symmetrical look.
How far should curtain rods stick out from wall?
General Installation Recommendations. When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side. This allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
Can you put 2 curtain rods together?
Some curtain rod manufacturers sell a curtain rod connector designed to fit inside the rod, allowing you to join two or more matching rods together to create one long piece. These inner tubes screw into place, requiring holes drilled at the ends of the curtain rod pieces to secure the entire structure together.
