Table of Contents
The R-value for wood ranges between 1.41 per inch (2.54 cm) for most softwoods and 0.71 for most hardwoods.
What is the R-value of 1 inch thick?
R-Value Chart for EnerfoilTM Rigid Foam Faced Insulation Thickness (Inches) R-value (in I-P/Imperial) RSI (R-value in Metric) 0.5 3.1 0.54 0.625 3.9 0.68 0.75 4.5 0.81 1.0 6.2 1.08.
What is the R-value of 1/2 inch plywood?
Tables of Building Material R-values Material Thickness R-value (F° · sq.ft. · hr/Btu) Gypsum Wall Board 1/2″ 0.45 Gypsum Wall Board 5/8″ 0.5625 Plywood 1/2″ 0.62 Plywood 1″ 1.25.
What is the R-value of 2 inch wood?
R-Value Table – English (US) Units Material R/ Inch hr·ft2·°F/Btu R/ Thickness hr·ft2·°F/Btu 2″ nominal (1 1/2″) 1.88 2×4 (3 1/2″) 4.38 2×6 (5 1/2″) 6.88 Cedar Logs and Lumber 1.33.
What is the R-value of a 10 inch log?
A 10-inch milled log has an R-value of 10.7 which is equivalent to a 2×4 stud wall with 31⁄2 inches of fiberglass with an 8-inch stud spacing. Natural logs are tapered so the insulation value should be based on the average thickness.
What is the thinnest insulation with the highest R-value?
Thermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).
What is the R-value of 1 1 2 rigid insulation?
This product typically has an R value of 3.6 to 4.0 per inch of thickness.
Does Tyvek have an R-value?
1. Tyvek®weather barriers resist bulk water penetration, helping to establish a tight building envelope to keep insulation dry. This helps wall insulation perform to its stated R-Value.
What is the R-value of 1 inch Styrofoam?
The polystyrene is expanded. Styrofoam insulation is the cheapest material. R-values can range from 3.6 to 4.2 per inch.
What material has the highest R-value?
Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.
Does a 2×4 have an R-value?
Cavity insulation, like framing, has options. A 2×4 wall cavity can be insulated from R-13 to roughly R-25. A 2×6 wall can be insulated from R-19 to R-39. Material selection, density, and cavity depth all play a role in the “cavity” R-value of a wall.
Does drywall have an R-value?
Drywall has a relatively low R-value — about 0.45 at ½” thickness. This is similar to building materials such as siding, concrete, dirt, face brick, particleboard, wood and single-pane glass.
Does air space have an R-value?
Air gaps have a thermal resistance to heat flow that is represented by an R-Value with the optimum or best R-Value achieved for a gap of 30mm. Wider air gaps do not achieve higher R-Values. High emittance surfaces have little or no resistance to heat flow and as a result the air gap has a low R-Value.
What is the R-value of logs?
The R-Value of Wood In a solid log wall, the logs provide both structure and insulation. The R-value for wood ranges between 1.41 per inch (2.54 cm) for most softwoods and 0.71 for most hardwoods.
Do log cabins hold their value?
In other words, they put a great deal of time and effort into their investment and are willing to pay for what they want! All of this means that most log homes are high in quality and value and are well-cared for, so they generally don’t depreciate and have a good resale value.
What is a good R-value?
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces.
What is the thinnest most effective insulation?
OPTIM-R is Kingspan’s thinnest insulation. It comprises of a rigid vacuum insulation panel (VIP) with a micro porous core which is evacuated, encased and sealed in a thin, gas-tight envelope which gives an outstanding thermal conductivity of 0.007 W/m.K.
What type of insulation has the lowest R-value?
Comparative Insulation R-Values Insulation Type: R-Value per Inch: Fiberglass (batts) 2.9 – 3.8 Cellulose (loose) 3.1 – 3.8 Stone Wool (loose) 2.2 – 3.3 Stone Wool (batts) 3.3 – 4.2.
What is the highest rated wall insulation?
Closed cell foam has the highest R-value of any insulation, around R-6.2 per inch, but can be expensive; open-cell foam insulation values are around R-3.7 per inch of thickness.
How thick is R25 rigid insulation?
Develop a 2-inch thick composite foam insulation board with R25 (hr-ft2-F/Btu), with a cost premium of $0.30/ft2.
What is the difference between pink and blue foam board?
Brand Names. Both pink and blue foam boards are rigid insulation panels made from extruded polystyrene. The chemical composition, manufacturing process and insulating capability of the two products are similar; the principal difference between them is that they are manufactured by two different companies.
What is the R value of 1.5 inch foam board?
Additional Information Thickness 1.5 in Length 8 ft Width 4 ft Edge Type Square R Value R 7.5.
Does house wrap Add R-value?
As shown in the chart, a home wrapped in DuPont™ Tyvek® will maintain 94% of its installed R-value, compared to only 37% for a home without Tyvek®.
Can you put Tyvek on backwards?
Can you install Tyvek® WB with the lettering facing inwards or upside down? Tyvek® HomeWrap® and Tyvek® CommercialWrap® are non-directional and are equally effective if installed with the logo facing the inside or outside of the wall or with the logo oriented in any direction.
Does a vapor barrier have an R-value?
Its closed-cell structure stops water and water vapor, resists compression, and holds its R-value over time. Must be protected from solvents and sunlight. Flammable and must be protected from fire with drywall or plaster. Vapor barrier needed: No, if packed to a density of at least 2.6 lb./cu.
