Table of Contents
An R-value tells you how well a type of insulation can keep heat from leaving or entering your home. Insulation R-values vary based on the type, thickness and density of the insulation material. Typically, a higher insulation R rating means better climate control and better energy efficiency for your home.
What is the best R-value for insulation?
Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces. See the Department of Energy’s (DOE) ranges for recommended levels of insulation below.
Is higher R-value better?
“R” means resistance to heat flow. Here’s what to know: The higher the R-value, the greater the insulating power. Almost all insulation products have to tell you their R-value — including duct wrap.
What is the R-value of 2 insulation?
R-Value Chart for EnerfoilTM Rigid Foam Faced Insulation Thickness (Inches) R-value (in I-P/Imperial) RSI (R-value in Metric) 1.0 6.2 1.08 1.5 9.3 1.62 2.0 12.4 2.16 2.5 15.5 2.7.
What is the R-value of 10 inches of insulation?
R-value of Materials and Depths Material R-value/in 10″ Fiberglass (batt) 3.1 – 3.4 31.0 – 34.0 Fiberglass blown (attic) 2.2 – 4.3 22.0 – 43.0 Fiberglass blown (wall) 3.7 – 4.3 37.0 – 43.0.
How many inches of insulation is R30?
Fiberglass Chart R-Value Thickness Bags / 1000 Sq Ft R49 16.25” 22.6 R44 14.75” 20.1 R38 12.75” 16.8 R30 10.25” 13.0.
Is R30 enough insulation?
The average recommended level is 14 inches of R49. In Zone 2, the average minimum requirement for attic insulation is 9 inches of R30 fill. The average recommended level is 17 inches of R60. In Zone 3, the average minimum requirement for attic insulation is 9 inches of R30 fill.
What does R30 mean insulation?
R30 is one of the standard R-values of insulation, which is a measure of the resistance offered by a material to the conduction of heat. Insulation is rated R30 if it can reduce heat conduction by 97%.
Is R30 better than R19?
Insulation in your walls and ceilings slows down this heat transfer. The bigger the R value, the better the insulation is at slowing down the heat transfer. So R19 is better insulation than R13, and R30 is better than R19. The larger the R value, the better the insulation value.
Do I want a high or low R-value?
Typically, a higher insulation R rating means better climate control and better energy efficiency for your home. A higher insulation R-value usually means a higher price point as well. For every type and material of insulation, check the R-value per inch of thickness that the manufacturer has listed.
What is the R-value of 3.5 inches of spray foam?
The R-value of open cell spray foam is about 3.5 per inch, although the R-value can be different depending on the product. Open cell spray foam has a low density and is many times applied in interior walls and areas that are hard to reach in a home.
What is the R-value of 3 Styrofoam?
STYROFOAM extruded polystyrene insulation is rated at an R-value of 5.0 per inch at 75°F.
How thick is r30 fiberglass?
8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1″ of ventilation air space between the insulation and roof deck.
What is R 11 insulation used for?
The Johns Manville R-11 Kraft-Faced Fiberglass Insulation Batt is a revolutionary insulating material that is ideal for controlling moisture of exterior walls. It is available in pre-cut sizes that make them suitable to fit in different types of standard wall cavities.
What is r14 insulation used for?
Description. Specifically engineered to use in exterior walls, cathedral ceilings, attics, basement walls, exposed floors, and heated crawl spaces. Easily cut, non-combustible, excellent sound absorbency. Does not rot or sustain vermin, does not promote growth of fungi or mildew.
How thick is r12 insulation?
R-12 EcoTouch PINK FIBERGLAS Insulation 15-inch x 47-inch x 3.5-inch (97.9 sq. ft.) Help keep your home warm in the winter and cool in the summer with EcoTouch PINK FIBERGLAS insulation from Owens Corning; providing a comfortable home and can save you money on heating and cooling costs*.
Does doubling the insulation increase the R-value?
Doubling the thickness of insulation will double the insulation’s R-value, cutting heat loss in half. Each time the insulation layer is doubled in thickness, this rule applies. In some cases, like an attic, it’s worth piling on more insulation because there is plenty of room.
What insulation fits in a 2×8?
Two-by-Eight Floor Joists Fiberglass R-19 batt insulation is about 6 inches thick and is available in 15-inch widths, making it the correct size for insulating a two-by-eight floor joist system.
Does acoustic insulation have R-value?
Acoustic insulation has an R-value, which measures insulation ability or how well it can resist heat flow. However, this may vary according to material and is expected to be lower compared to thermal insulation. To measure soundproofing quality, it is better to use STC or Rw.
Can you put too much insulation in your attic?
It’s possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.
What is the R-value of 4 inches of insulation?
For areas with 3-4 inches of existing insulation, you will need an R-value of 38-49. For insulating flooring, you will need an R-value of 25-30.
What insulation has the highest R-value per inch?
Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.
Is R 21 better than R19?
Upgrading to R-21 R-21 insulation has a higher density than R-19, although it is designed to fit into the same space. It tends to be slightly thinner than R-19 because of its density. R-21 insulation is more efficient at preventing the transfer of heat, but it costs more per square foot.
What does R13 mean in insulation?
R13 fiberglass batt insulation is 3 5/8 inches thick.
How good is R19 insulation?
Although the U.S. Department of Energy rates R-13 insulation as “good” for use in walls in southern areas of the country, it rates R-19 insulation higher, designating it as “great.” That is because R-19 insulation provides more thermal insulation than R-13 does.
