Table of Contents
Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72 inches, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches.
What is the standard height and depth of a bathroom vanity?
For a single vanity, the most popular widths are 24″, 30″, 36″, 48″, and for double vanities the most popular widths are 60″ and 72″, but start at 48″. The standard depth of a vanity is typically around 20″, but narrower options are available. The standard vanity height is 32″, but ranges from 30″ – 36″.
What is the smallest depth for a bathroom vanity?
While most bathroom vanities measure around 17 inches to 24 inches deep, the standard bathroom vanity depth is 21 inches. For smaller bathroom spaces, narrow depth bathroom vanities are available that measure less than 18 inches deep.
What is the best depth for a bathroom sink?
Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
What is the best height for a bathroom vanity?
The standard height for a bathroom vanity is about 30 to 32 inches. On the other hand, a comfort height bathroom vanity matches kitchen countertop height at 36 inches. Most adults prefer comfort height vanities, though the standard height is easier for children. It’s really up to you and your bathroom preferences.
How much overhang should a bathroom countertop have?
The standard overhang for a bathroom countertop is about 1 to 1 1/2 inches from the cabinet. A bathroom countertop that is surrounded by walls is typically flush with the boundaries and has no overhang except the inch or more in the front.
How is vanity depth measured?
Take a measurement at the widest part of the variety in contact with the the floor, which is your base width. Then, measure across the countertop, which is your top width. Next, to get the depth dimensions of your vanity, take base and top measurements.
How shallow can a vanity be?
The standard vanity depth is 21 inches. But you can gain floor space in a small bath by trimming at least part of the vanity to 18, 15, or even 12 inches deep.
How shallow can I make a vanity?
Shallow-depth vanities are those that measure between 17 and 20 inches deep. These slim vanities can be any width or height since depth is the concern. This vanity offers two sinks, three drawers for storage, and built-in electrical outlets and USB outlets for easy device and bathroom appliance use and charging.
What is the most narrow vanity?
The Beverly Single Bath vanity is one of the narrowest vanities at 19″D yet still holding plenty of storage space for all your personal accessories.
What should I look for in a bathroom sink?
Pedestal Stylish design element, offering a very versatile look for any theme. Good option for powder rooms. Available in one- or two-piece design. Limited surface area and no storage space. Available in many shapes, sizes, finishes, and faucet configurations.
What size sinks for 72 inch vanity?
One-of-a-kind concrete sink with vanity. See it on Etsy. Cabinet Width Cabinet Depth (Standard) Max Sink Size (With NO counter space) 36″ 21″ 33″ 48″ 21″ 34″ 60″ 21″ 34” or 19” x 2 for double sinks 72″ 21″ 34” or 19” x 2 for double sinks.
Why are bathroom counters so low?
The only reason bathroom counters were lowered was to make the sink accessible for small children. While it’s not entirely impossible for them to use the sink, it could make it more difficult for them to wash their hands. For kids bathrooms, you can install standard height vanities.
How high should mirror be above vanity?
The height of your mirror will also be determined by the height of your vanity. Ideally, the mirror should be mounted a few inches higher than the tallest point of your vanity faucet, or between 5 to 10 inches above the bathroom sink. You also need to account for your bathroom light fixtures.
Are bathroom vanities the same height as kitchen cabinets?
Bathroom cabinets typically run shorter than kitchen cabinets with a height of approximately 31 inches tall. While bathroom cabinets can be custom designed to match the height of kitchen cabinets, the most common practice is to have them stand at 31 inches tall.
Is 2 inch countertop overhang too much?
A quick search on Google revealed a recommended standard countertop overhang ranges from 1” to 1-1/2”.
What is standard countertop depth?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.
How far can a countertop overhang without support?
Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.
