Table of Contents
Which side of laminate floor is the tongue?
The tongue on laminate flooring is the small flat edge on one side of the board, this is the top edge that is going to angle and lock into the bottom side of another board.
Does it matter which side of laminate flooring?
In what direction should you lay a laminate floor? In most cases, you should lay your laminate flooring parallel to the longest side of the room or your home. This will create a more natural flow and will accentuate the length of the room better.
What side is the tongue on tongue and groove?
On one long side of the plank you’ll find the tongue and on the other long side you’ll find the groove. The same is true on the short sides. So on each of the four sides you’ll either find a tongue or a groove, thus the name tongue and groove.
Which way should you lay laminate flooring in Long room?
In general, laminate manufacturers recommend laying laminate flooring perpendicular to the longest wall in a long, narrow room to avoid a bowling alley effect. When the boards are laid across the room, the lines between the boards and the wood pattern visually widen the room.
Does the tongue or groove go against the wall?
Which to Install First. Which side is the tongue, which the groove, and which goes first during installation? The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation.
Do you lay laminate flooring vertically or horizontally?
You can lay your flooring either horizontally or vertically. Vertically will elongate a room and works great if pointing towards a window, as it will follow the natural light. Laying laminate flooring horizontally will can make a small room appear larger.
Can you change direction of laminate flooring?
Strip flooring can be installed in any direction in any room, however the convention is to run parallel with the longest wall in most situations. Rarely is this type of flooring run perpendicular to walls in a hallway.
Do you have to nail tongue and groove flooring?
Although tongue and groove solid hardwood flooring does fit together, it must still be nailed to a subfloor. Engineered tongue and groove planks, however, snap together to create a “floating” floor that is not physically attached to the floor below.
Should tongue and groove be glued?
The recommended glue for floating installation is Tongue and Groove engineered flooring glue. Glue placement is very important. The glue must be placed along the topside of the groove the full length of the grooved side and end.
When laying laminate where do you start?
Always start hardwood flooring along the most prominent and noticeable wall in the room. This way, if the room is out of square, the crooked cut will be hidden under the cabinet’s toe kick. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.
Is there a right direction to lay wood floor?
Wood floors should always be laid perpendicular to floor joists—across rather that in between them. This will make the floors structurally sound and will help prevent the planks from separating, sagging or buckling. So, there is no right or wrong way to lay your wood flooring.
Do you need to stagger laminate flooring in hallway?
Laminate flooring manufacturers often require their floors to be staggered anywhere between 6 to 12 inches, some manufacturers even want more. Don’t ever short-stagger your flooring, it is both not aesthetically pleasing, and can also bring up some of the same issues as not staggering the floor at all.
Which direction should vinyl plank flooring be laid?
In the same vein, it’s typically recommended that planks are installed parallel to the longest wall of the room. So, if you’re installing vinyl planks in a 12 foot by 18 foot living room, run the planks parallel to the 18 foot wall. This will make smaller rooms feel bigger and wider.
How do you start the first row of laminate flooring?
Begin the first row of flooring by placing the planks with the tongue side facing the wall. Install the second plank next to the first by aligning the tongue into the groove and press the plank down to snap it in place. When you come to the end of the first row, cut the length of plank needed to complete the row.
Does laminate flooring need transitions?
If you decided to install either hardwood, ceramic or laminate, you will need the transitions. These transitions are useful for two main reasons. Firstly, they ease the navigation from one room to another. They also visually divide rooms and different floorings.
How do you stop laminate flooring at doorways?
How To End Flooring at a Doorway Lift to Fit. Plan on a seam in the middle of the doorway. Notch and cut the first piece to fit and then slide it completely under the jamb. Slide Both Pieces Over. Once the two pieces are connected, slide them both over just far enough so that both jambs cover the flooring ends. 11 / 12.
Can tongue and groove flooring be reused?
Tongue-and-groove hardwood floors have been popular in North America since the mid-1800s, and recycling flooring from old warehouses, offices and homes is a smart move. You can install reused flooring in the same way you install new flooring, but a careful inspection of each board is an important precursor.
How tight should tongue and groove be?
All it takes is 1⁄8″. The joint should be a firm press fit: If you have to knock the pieces together, then struggle to pull them apart, the joint’s too tight. A tongue that’s a hair too fat for the groove may actually seat, but it will stress the groove sidewalls and may, in time, prompt them to split.
Where do you start when laying tongue and groove flooring?
Start at the corner of the room and place the first board with the tongue facing toward the wall. Be sure to leave a gap of about a ½-inch so the floor has room to expand and contract. 5. Place the second board next to the first so the shorter ends touch, and pull the second piece as close as possible.
