Table of Contents
Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed. Soffit Vent: An intake vent in the soffit area of the house that provides attic venting at a lower portion of the roof deck and good circulation with other forms of venting such as ridge or roof vents; also called an intake vent.
What is roof edging called?
The eaves The eaves are the edges of the roof which overhang a vertical external wall and, normally, they jut out over the side of a building creating an overhang, so rainwater stays clear of the walls. Check out for rot or damp on eaves as if this happens, water can get into the loft space or damage external walls.
What is the board called under the soffit?
Take a look at your roof and focus on where it extends from your house. The vertical board that hangs down from the edges is called the “fascia board”. The Fascia, which derives from the same word in Latin (meaning doorframe), serves as a finishing edge that serves both as a decoration and protector for your roof.
What are the different parts of a roof called?
The Architectural Parts of a Pitched Roof Roof plane: This is the surface of the roof. Ridge: This is the top or peak of the roof, where two roof planes meet. Valley: This is where two pitched roof faces connect and project inward. Dormer: This is a roof feature that projects out from the roof face.
What are boards under eaves called?
Soffits are the flat boards that cover an overhanging roof from the underside. They’re attached to the lower end of fascia boards and cover the area between the external wall and the fascia to protect the exposed part of the roof.
Is the fascia board part of the roof?
The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters. Clogged gutters, animal infestation in an attic area and other roof problems might leave you with a damaged fascia board.
What is a roof soffit?
The soffit is part of the overhang where your roof meets your siding. When rain or snow hits your roof, it runs down, and the overhang allows the water to flow away from your house. The soffit is underneath the overhang, between the roof’s edge and side of your home—the bottom of the triangle, if you will.
What is the underneath part of the roof called?
Soffit—The area that encloses the underside of that portion of the roof that extends out beyond the sidewalls of the house.
What is the underside of the gutter called?
Fascia. Specifically, used to describe the horizontal “fascia board” which caps the end of rafters outside a building, which can be used to hold the rain gutter. The finished surface below the fascia and rafters is called the soffit or eave.
What is a soffit interior?
A soffit is an exterior or interior architectural feature, generally the horizontal, aloft underside of any construction element. Its archetypal form, sometimes incorporating or implying the projection of beams, is the underside of eaves (to connect a retaining wall to projecting edge(s) of the roof).
What part of a roof is the eaves?
The eaves of a roof is its lowest horizontal edge. The eaves may terminate flush with the outer face of the wall, in which case it is known as a ‘flush eaves’. It may also project out beyond the external wall, with a soffit below.
What is a roof facet?
A facet is one section (plane or surface) of a multi-sectioned roof that is over 4 square feet.
What is the basic structure of a roof?
The major parts of a residential roof It consists of rafters and trusses, which are beams that form the shape of the roof and support the sheathing or the next layer. Drainage features are also established during the roof structure phase.
What is the difference between fascia and soffits?
Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.
What is the difference between barge board and fascia?
Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.
What is the difference between eaves and soffits?
Eaves are usually made of wood and then covered with roofing material. Soffit materials coordinate with siding and fascia boards on the exterior walls, and generally follow the aesthetics of the residence.
What are soffits and fascia boards?
The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board.
What is the difference between fascia and flashing?
Flashing prevents leaks and protects the deck (the first layer of roofing) and underlayment, which is usually tar paper. Fascia is a flat board or band located on the front of your roof’s overhang. It is connected to the trusses or rafters of your home.
What do you use for roof fascia boards?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What is behind soffit?
A kitchen soffit serves a purpose, which is typically to cover up and hide the necessary kitchen wiring, ductwork, and even plumbing. The only way to know what is behind the soffit is to look at the original building plans or to cut holes into strategic areas to determine what’s inside.
