Table of Contents
Manufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.
What type of sheetrock is used in mobile homes?
The most common type of wall used for a manufactured home is called Vinyl-Over-Gypsum or VOG for short. VOG is drywall that is coated in vinyl wrap. This is different way of treating drywall as compared it being taped, floated, textured & painted.
Can you replace walls in a mobile home?
Single-wide mobile homes are designed to be light, but the walls of most of them still contain wooden studs. Manufacturers often cover the walls with 1/4-inch paneling, but the studs can support drywall, so there’s nothing preventing you from removing the paneling and replacing it.
How are mobile home walls constructed?
Mobile home walls are constructed much like the floors. They consist of a framework, usually in H-shapes, of wooden joists and supports. The space in between these joists forms cavities that are also used for insulation material. Both the interior and exterior of the walls are then covered in panels.
Do mobile home walls have studs?
Manufactured homes are largely built the same. There are still manufactured homes built with 2”x3” interior wall studs, however. Keep in mind that interior, non-load bearing walls are simply dividing up the interior space of the home and are not structural.
What thickness Sheetrock is in mobile homes?
Manufactured home wallboards range in thickness from 5/16” to ½”. The 5/16” thickness used to be the most popular measurement for Paper On Gypsum (POG) wallboards, but the majority of new Clayton homes with POG wallboards are now 3/8”.
Can you put drywall over mobile home walls?
Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.
What are the interior walls of a mobile home made of?
Manufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.
How do I upgrade the walls in my mobile home?
Walls Remove all trim from the walls. Prime the walls with an oil based primer. Fill in the line gaps in the paneling with drywall mud. Tape and mud the joints between the 4 x 8 sheet of paneling. Spray orange peel texture on the walls. Prime the walls for paint with a latex primer. Paint the walls.
Is drywall too heavy for mobile home?
Drywall that is 5/8″ thick is, of course, a little heavier, at 2.31 pounds per square foot or 73.92 pounds per sheet which is entirely too much for mobile home ceilings.
What walls are load-bearing in a mobile home?
To summarize, the most important thing to take note of when considering removing homes in a mobile home is whether or not the walls are load-bearing. The load-bearing walls in a mobile home are typically made up of the marriage line and its exterior walls.
What construction type is a mobile home?
Steel Frame – Manufactured homes are built atop steel beams at the factory. These are girder beams with attached wheels and axles for transportation to the final home site. Permanent Foundations – A permanent foundation is the way to go if you own the land and do not plan on ever moving the home.
Do manufactured homes have load-bearing walls?
Do Mobile Homes Have Load Bearing Walls? Single wide mobile homes do not have load-bearing interior walls, but double wides do. For example, some companies screw the wall studs to the roof studs. A double-wide mobile home is basically two single wides connected to one another by what is called the ‘marriage line.
How do you hang something heavy on a mobile home wall?
Use interlocking adhesive strips that are designed to hold objects on walls. These strips are two-part hangers that adhere to each other after they are mounted. Place one set of strips on the back of the item you wish to hang. Hold the item to the wall to take note of where you want to place it.
How much weight can mobile home walls hold?
In most cases, this should be able to hold between 50 to 100 pounds.
How far apart are studs in a trailer house?
Exterior studs in mobile home trailers should be 16 inches apart. You do not want the mirror you hang on your wall to fall and crash, and coat hooks hanging on the walls need to be strong enough to hold objects.
How do you repair a VOG wall?
Manufactured Home Wall Repair Patch Step 1 – Sand lightly around damaged area of wall. Step 2 – Apply spackling compound to back of match. Step 3 – Place patch over damaged area. Step 4 – Spread compound over patch, then let dry. Step 5 – Sand, then apply texture or paint for desired appearance.
How do you drywall a mobile home?
Steps to hanging drywall Step 1: Before You Begin. Remove molding, baseboards, batten strips, outlet covers and wall switches. Step 2: Measure & Cut. With a chalk line or straightedge, mark cut line. Step 3: Hang Panel. Step 4: Fasten Panel. Step 5: Fit Upper Panels. Step 6: Cut Around Outlets. Step 7: Fit Lower Panels.
What is a POG wall?
POG manufactured home wallboards are made of a piece of gypsum, often referred to as drywall, that has a paper covering that is laminated to the board.
