QA

Quick Answer: What Size Is Standard Shower Curtain

Across the board you’ll find three options when it comes to standard shower curtain sizes: 70 x 70 inches. 70 x 72 inches. 72 x 72 inches.

What is the average size of a shower curtain?

The standard shower curtain size is 72 x 72 inches. Standard shower curtain length extends to the floor and covers the tub. Of course, if you have a custom shower, standard curtain panel sizes may not be the right fit for your shower.

How do I know what size shower curtain to buy?

Measure the width of the entire space the curtain will fit over. This typically is the front section of the shower or bathtub. Measure in inches, then choose a rod that fits the opening. Keep in mind that standard shower curtains are 70 or 72 inches wide.

How big is a standard shower?

If you’re considering a standard shower size to align with ADA accessibility standards, aim for at least 36 inches x 36 inches.

What are standard size curtains?

Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.

How big is a standard bathroom?

The average size of a full bathroom in the US is five by eight feet, or 40 square feet. The average size of a primary bathroom in the US is 115 to 210 square feet, with an average of 160 square feet.

Is a 30 inch shower too small?

In general, a shower should measures at least 36 inches square. However, if your bath space is especially petite, 30 inches square is the absolute minimum space requirement for a shower. Consider these small shower ideas to help you fit a functional and attractive shower unit into a tight space.

What is a good width for a walk-in shower?

The ADA suggests a minimum size of 36 inches by 36 inches for a walk-in shower, which features a bench attached to one wall for sitting. Even if you eschew the bench, 36 inches by 36 inches is a good minimum size for ease of showering.

What is the standard drop for curtains?

Most curtain designs come in standard drop sizes of 54”, 72”, 90” and 108” so you may have to round up to the nearest size. For example, if you measure your drop and it is 147cm (58”) in length and you wanted your curtains to sit off the floor you would round this up to the 72” drop curtains.

What does 84 inch panel mean?

The sizes are listed width by width. The curtain panel is 54 inches wide by 84 inches long. Before choosing curtains, it is advisable to install a curtain rod.

Are all curtains the same width?

Understand Measurements Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.

What is the average size of an en suite bathroom?

The average size of an en-suite bathroom or shower room is approximately 1200 mm wide x 2100 mm long. It’s also possible, with careful planning and design considerations, to make a functional en-suite in a much smaller space.

What is the average size of a master bedroom and bathroom?

A small-sized master bedroom normally has a bathroom that measures 40 square feet. An average-sized master bedroom has a bathroom with a size of 50-100 square feet. A large-sized master bedroom normally has a bathroom that has a size of 110-200 square feet and above.

How big should a master shower be?

While you can see standard shower sizes as small as 32″ x 32″, most people would feel comfortable in a 48″ x 36″ size shower. If your home has a little more space available, a very common recommendation is to have a shower with minimum dimensions of 60” x 36”.

Is a 32 inch corner shower too small?

It’s plenty big, though not overly spacious or luxurious. If it were 32 x 32, it might feel cramped. Also, I could never have a sit-down shelf in this shower; the space just isn’t there. Remember, too, you can go too big in a shower.

What is too narrow for a shower?

The minimum code approved size for a shower is 32″x32″. 36″x36″ actually is a bit tight for most adults. 30″ is NOT wide enough for a legal shower. If you don’t have room for at least the 32″ width here without impinging on the required clearance for your toilet and vanity, then I’d suggest doing a closet instead.

Is 34 wide enough for a shower?

Walk in showers should be no less than a minimum size of 32 inches in length x 32 inches in width. The usual dimensions of a standard walk in shower are 34 inches x 34 inches, 36 inches x 36 inches and 42 inches x 36 inches; these sizes, of course vary depending on the size of the bathroom.