QA

What Size Socket Set Should I Buy

What is the best size socket set?

Drive Size ½-inch drive size sockets are for high-torque applications like automotive wheel replacement and when you are using a breaker bar. ⅜-inch drive size sockets are the most common and most available. ¼-inch drive size sockets are ideal when you are in tight spaces or when you are working with recessed nuts.

What size is a standard socket set?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).

How do I choose a socket set?

List of Free Tips to Choose the Right Socket Set #1)Metric, SAE and Inches. #2)Drive size of the socket set. #3)Points of Socket Set. #4)Shallow vs. deep sockets. #5)Finish of the socket set. #6)Impact sockets.

What is the most common size socket?

Question: What are the most common socket sizes? Answer: Generally, the most common socket sizes are the 10mm and 36mm ones. In the SAE size, it’s around 13/32” for the 10mm ones.

Should I get a metric or imperial socket set?

Metric or Imperial? If you know you will only be using your socket set for work on a certain item or a small number of items that you know only have either metric or imperial fasteners, then buying a socket set with just sockets of those sizes would be the most economical thing to do.

What is a good brand of socket set?

Best Overall: Sunex Tools 3342 3/8-Inch Drive Master Impact Socket Set. This excellent collection of 42 sockets, each crafted from Chromium-Molybdenum Alloy Steel, marries a wide range of metric, deep metric, SAE, and deep-SAE sockets with affordability and top quality performance that you can trust.

How do I know what size socket I need?

How to Determine the Right Size Socket for a Nut Turn on the digital caliper and set it to read in inches, not millimeters. Close the caliper jaws until each jaw rests on one flat side of the nut on opposite sides. Check the caliper display. Turn on the digital caliper and set it to read in millimeters, not inches.

How do I know what size socket wrench I need?

Multiply the first number which is the bolt size in inches or millimeters, by 1.5 using a pocket calculator, if necessary. For example, for the numbers in Step 1, 1/2 x 1.5 = . 75 or 3/4, which is the wrench size needed for this standard-sized bolt.

How do I know what size wrench I need?

To calculate the wrench size needed, you must first measure your bolt. Take the diameter of the bolt, and multiply by 1.5. This calculation and conversion factor is valid for either metric or standard bolt sizes. The resulting number will be the size of the wrench you need to adjust the bolt properly.

Is a 6 point or 12-point socket better?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

What are Imperial sockets used for?

Imperial socket sets Socket sets in imperial measurements are designed to tackle fasteners whose heads are measured in inches and fractions of inches.

What are the 3 common ratchet drive sizes?

Available with different drive sizes — 1/4 inch, 1/2 inch and 3/8 inch — to operate different size sockets.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

Do you need both SAE and metric?

For general automotive work – you will need both. With American cars they are mixed – sometimes on the same part… (Ie the housing bolts are 9/16 but the nut on the pulley is 19 mm…) Older heavy equipment is all SAE, newer stuff mixed foreign stuff metric.

Does BMW use SAE or metric?

1/4″, 3/8″, 1/2″ metric torque wrenches – Make sure it has a metric scale, BMW service documentation is always metric.

Do you need imperial sockets?

No one uses imperial anymore, there’s no need for them.

Are Dewalt socket sets good?

The sockets are good quality, and the socket wrenches are very comfortable. The set is enormously heavy, and it sure isn’t the blown plastic case making it that way. There’s a lot of steel here, and it seems to be the springy, hard, elastic steel you’d want in a socket set.

Are Pittsburgh sockets good?

HF does carry some junk, but that is to be expected at a “discount store.” However, their Pittsburgh line of tools are actually pretty good, especially if you don’t work with tools every day, and just need some around the house for the occasional job.

Is Husky a good brand?

They are known for a good value and known for their hand tools. Recently Husky has stepped up their game in regards to quality. Select CRAFTSMAN power tools, hand tools, lawn and garden equipment, and storage are being made with pride in the USA with global materials–and it’s here to stay.