Table of Contents
The minimum recommended thickness for the shower wall is 1/2″ because like some of the other boards, they become far too flexible at thicknesses below 1/2″. Foam shower tile backer boards are generally about 4x the cost of cement board.
Can you use 1/4 cement board shower walls?
1/4″ hardibacker alone is an unsuitable substrate for shower wall tile. If it were attached to properly waterproofed drywall, plywood, or plaster it would be fine. Think about it, one wayward elbow, knee, or hip bump and you may get flexion which would cause the grout (or tile) to crack.
How thick is cement board for shower?
Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed when spanning the studs and it provides a solid base for the tile.
What is the best cement board for shower walls?
Styrofoam backer board is extremely lightweight, and it’s strong and waterproof. It’s also easier to cut than other backer boards, and it’s dust-free. It’s ideal for wet areas like the shower walls or floor.
Do I need cement board for shower walls?
Cement boards can be used for shower ceiling but it is not necessary. It is however more durable in showers that are exposed to high moisture or steam because it will not deteriorate or warp as easily as a drywall. If installing tiles on shower ceiling, you can also use cement boards as well.
What thickness Hardibacker should I use?
We recommend 1/4 in HardieBacker® board for floor applications, unless 1/2 in thickness is needed for transition. On existing structures: Ensure subfloor is not damaged. Replace any loose, warped, uneven or damaged sections of floor.
What goes behind cement board in shower?
Unless specifically manufactured as a waterproof product, cement board is water resistant but not waterproof. You must coat it with a fluid-applied waterproofing or apply a water-resistant barrier behind it that drains (BSC 2009b).
How thick are shower walls?
Two options include molded wall panels like the 1/8” thick acrylic panels and 3/8” thick solid surface walls. Another options (mentioned previously in this article are textured tile and stone wall panels with a laminated surface (which are 3/8″ thick).
What board do you use in a shower?
In showers, the standard substrate is tile backer, also called cement board or cement backer board.
What’s the difference between durock and Hardie board?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
Do you need waterproof membrane on cement board?
Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.
Do you need to use RedGard over cement board?
You really don’t need the RedGard, but the more protection the betterso go for it. And yes, you can do the boards beforehand. But, hit the filled seams & screws (your weak points) as soon as a panel is ready to give it some time to setup.
Do you need a vapor barrier behind cement board?
If it’s a cement board, you need a vapor barrier, because cement retains moisture, which means the wood next to it is always damp.
Can I just screw down cement board?
Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on the floor. It is important to highlight that screws shall not be installed all the way down to the floor joists.
What size of Hardibacker do you use for the shower walls?
Cement backer board comes in two standard thicknesses, 1/2 inch and 1/4 inch. The industry standard is to use 1/2-inch-thick backer board on wall tile installations, such as a tub surround.
Can you use Hardie board on shower walls?
Installing cement backerboard is one of the more popular choices for a shower wall substrate. Cement backerboards include Hardiebacker, Durock, Fiberboard, wonderboard, and similar products. When installed properly they will give you many, many years of durable shower construction.
Can I use green board for shower walls?
It means “Greenboard” can still be used in bathrooms (and other areas), it just cannot be used as a backer for tile in a shower or tub surround. It can be used in areas not subject to direct water exposure (tub/shower surround), and areas of noncontinuous high humidity (bathrooms).
How many screws do I need for a 3×5 cement board?
We recommend referring to the cement board manufacturers guidelines for screw pattern. In floor applications, screws should be placed every 8″”. You will use approximately 55 screws per 3′ x 5′ cement board and 91 screws per 4′ x 8′ cement board. In ceiling applications, screws should be placed every 6″”.
Is Durock cement board waterproof?
USG Durock Brand cement board with EdgeGuard offers architects, builders and tile contractors a strong, water-durable tile base for tub and shower areas. Also an ideal underlayment for tile on floors and countertops in new construction and remodeling.
Can you caulk cement board in shower?
In the event the caulk seal between the bottom row of tile and the tub/shower fails, water can get behind the tile. The best thing to do is to hold all tile backer boards up 1/4 inch from these ledges. Then, before installing the tile, apply a bead of pure silicone caulk between the backer board and the ledge.
