Table of Contents
What size notched trowel for 8×8 tile?
1/4” x 3/8” square notch: this trowel size is good for 8” x 8” tiles, some builder grade tiles, and bigger subway tiles (around 4” x 12”).
What type of thinset should I use for ceramic tile?
Types of thinset. Dry-set mortar is suitable for thin-bed installations of ceramic and natural stone tiles over a variety of surfaces. It’s used in one layer nominally between 3/32- and 1/4-inch thick.
What size notched trowel do I need?
All tile manufacturers offer a recommended trowel size. Mosaic installations up to 2 inches can use a 1/8-inch notch, as can wall tiles of up to 4 inches, as a general rule. 16-inch tiles need a 1/2-inch-deep notch, and anything over 24 inches should use a 3/4-inch notch.
What size notched trowel for Thinset?
Thinset & Grout Coverage Info FLOOR APPLICATION WALL APPLICATION TROWEL SIZE (based on largest dimension) Mesh Mosaics Mesh Mosaics 3/16 inch V-Notch 4 inch – 12 inch Tile 4 inch – 12 inch Tile 1/4 inch Square 12 inch – 16 inch Tile 12 inch – 16 inch Tile 3/8 inch Square 16 inch or larger 16 inch or larger 1/2 inch Square or V-Notch.
Do I need modified or unmodified thinset?
Modified thinset is the product of choice for most tile installations because of its increased strength and bonding with minimal shrinkage, which means a reduced chance of cracks forming in the tile. WarmlyYours Radiant Heating recommends modified thinset mortar for nearly all tile and stone installations.
What is the difference between modified thinset and unmodified thinset?
Unmodified thinset has been around forever. Unlike unmodified mortar, which consists only of a blend of Portland cement, sand, and water retention agents, modified thinset includes additional retention products, such as latex polymers, which can increase its performance and strength.
What is the difference between porcelain and ceramic thinset?
In general, porcelain tile is harder than ceramic and offers greater design flexibility. Although both are made from clay and other naturally occurring materials fired in a kiln, the clay used to make porcelain tile is more refined and purified.
What is the difference between white and GREY thinset?
The most common adhesive for setting tiles is thinset mortar—that is, mortar designed to be applied in a layer no more than 3⁄16 in. If you intend to use a dark-colored grout, choose a gray mortar; choose white if your grout will be a light color.
Can I use unmodified thinset for porcelain tile?
Just to clarify Danny’s answer; You need to use a modified thinset with porcelain. The only time you can use unmodified is when the manufacturer of an associated system advises to use something else such as with Ditra and Kerdi installations. So unless you’re going over such a system, you have no choice.
Can I use modified thinset over Hardibacker?
Space between plywood supports is not to exceed 16 in on center. Do not align HardieBacker cement board joints with plywood joints. Apply a supporting bed of dry-set mortar or modified thinset to plywood with a 1/4 in square-notched trowel. Mastic can also be used with a 5/32 in V-notched trowel.
Where do you start when tiling a wall?
It’s always advisable to start tiling your grid in the centre of the wall, as it’s easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
Which way do you lay rectangular wall tiles?
A horizontal orientation with a 1/3 offset tile floor is best for rectangular tiles. Its direction is similar to a brick wall, where the longer side is across the surface. This creates a more pleasant layout and makes the room look wider.
How do you know what size trowel to use?
Finding the right trowel for the job is quite simple when you know that, generally speaking, the trowel size should match up to the tile size – the smaller the tile, the smaller the trowel; the larger the tile, the larger the trowel.
What size trowel should I use for 12×12 tile?
Floor tiles measuring 12 by 12 inches are considered standard, requiring a notched trowel size of either 1/4 inch by 3/8 inch or 1/2 inch by 1/2 inch.
How thick is Thinset under tile?
How Much Thickness Should You Allow for Thinset when Tiling? Plan for a layer of thinset 3/16-inch to 1/8-inch thick beneath your tile. A 3/16-inch layer of thinset will be enough for tiles with a smooth back to bond the tile to the floor or backer board.
How big should grout lines be for 12×24 tile?
A large tile, such as 12×24”, usually requires a 3/16” grout line, so it’s best to check the manufacturer’s recommendations to see how small you can go.
What size trowel do I need for subway tile?
The ¼ inch square notch trowel is most widely used across the tiling industry. This size works best for small mosaic and ceramic tiles such as 3” x 6” subway tile. The key purpose of a trowel is to produce a smooth, tidy surface for tile installation.
How big should grout lines be for subway tile?
How big should grout lines be for subway tile? 3 x 6 inch subway tiles typically have grout joints of 1/16 inch, but 1/8 inch grout joints are also common.
What happens if you use modified thinset on Ditra?
Since DITRA is impervious, it does not deprive the mortar of its moisture. This allows the cement to properly hydrate, resulting in a strong, dense bond coat. In general, we don’t recommend the use of modified thin-set mortar to set tile over the membranes because these mortars must air dry to cure properly.
What Thinset do you use with Kerdi?
Schluter SET™, ALL-SET™, FAST-SET™ or an unmodified thin-set mortar must be used to construct all KERDI seams to ensure watertightperformance of the system.
