Table of Contents
Chemicals used as coagulants in drinking-water treatment include aluminium and iron salts, such as aluminium sulfate, polyaluminium chloride or ferric sulfate.Chemicals used as coagulants in drinking-water treatment include aluminium and iron salts, such as
Aluminium sulfate – Wikipedia
, polyaluminium chloride or ferric sulfate.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
Which chemicals are used for coagulation?
The main chemicals used for coagulation are aluminium sulphate (alum), polyaluminium chloride (also known as PAC or liquid alum), alum potash, and iron salts (ferric sulphate or ferric chloride).
What is the most common used in coagulant?
Chemical Coagulants Used In Water Treatment Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world. Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive. Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH).
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
Is Lime a coagulant?
Lime (Ca(OH)2 or CaO): Lime, or calcium hydroxide, is predominantly used to adjust pH, but as a softener, it can also be used as a coagulant aid. The lime bonds with the other particles and increases the size/weight of the flocs which then increases the speed with which they settle out of the water.
What is the difference between flocculant and coagulant?
Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts. Generally speaking, anionic flocculants are used to catch mineral particles while cationic flocculants can capture organic particles.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
Which coagulant is used for sewage treatment?
Ferric chloride is widely used for sewage treatment and Alum is widely used for water treatment.
What are natural coagulants?
They are mainly composed of polymers of natural origin extracted from plants, algae or animals. Among these are polysaccharides and water soluble substances that act as coagulation and / or flocculation agents.
What are common coagulants?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
What is coagulant mean?
A coagulant is a compound or agent which is added to a vessel to help thicken something. Adding a coagulant such as aluminum sulfate to water permits particles to come together and results in the formation of a flocculent mass. A coagulant is a compound or agent which is added to a vessel to help thicken something.
What are the side effects of alum?
If experienced, these tend to have a Severe expression i fluid accumulation around the eye. throat swelling. a feeling of throat tightness. a skin ulcer. hives. a shallow ulcer on the skin. fainting. puffy face from water retention.
Is alum positive or negative?
For example, the colloidal particles are negatively charged and alum is added as a coagulant to create positively charged ions. Once the repulsive charges have been neutralized (since opposite charges attract), van der Waals force will cause the particles to cling together (agglomerate) and form micro floc.
What is the pH of alum?
Alum is most commonly delivered as a liquid concentration, having a solids level of 8.3% as Al2O3 or about 50% as hydrate. Alum solutions are acidic. For instance, a 1% solution has a pH of around 3. Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions.
Why does limewater turn milky?
Carbon dioxide reacts with calcium hydroxide solution to produce a white precipitate of calcium carbonate. Limewater is a solution of calcium hydroxide. If carbon dioxide is bubbled through limewater, the limewater turns milky or cloudy white.
Is alum and lime the same thing?
Hydrated lime’s chemical name is calcium hydroxide, and its chemical formula is Ca(OH)2. When purifying water, adding hydrated lime to the water for pH adjustment is a part of the process. Filter alum is an acidic salt that lowers the pH of water undergoing purification.
Why do they put lime in water?
pH Adjustment/Coagulation – Hydrated lime is widely used to adjust the pH of water to prepare it for further treatment. Lime is also used to combat “red water” by neutralizing the acid water, thereby reducing corrosion of pipes and mains from acid waters.
Is gypsum a flocculant?
Gypsum can coagulate or bridge clay particles, which accelerates settling. Flocculants should be used to prevent damage to sensitive water resources such as ponds, lakes and trout streams or whenever turbidity control is required. The best thing to do is a jar or bucket test using slightly varying rates of gypsum.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
What are the similarities and differences between flocculation and coagulation?
Coagulation is a chemical process and flocculation is a physical process, In coagulation, the process involves the utilization of a coagulant that has the ability to destabilize the charged particles which are not settleable whilst flocculation involves a similar destabilization process that is achieved through Dec 10, 2017.
Is na2so4 a coagulant?
Sodium sulfate is a well-known coagulant for PVA, and it is used in the coagulation bath of PVA before wet spinning of vinylon fibers.
What is PAC coagulant?
Polyaluminum chloride (PAC) coagulant has been developed and used in water and wastewater treatment since the 1980s throughout the world (Jiang, 2001). PAC is made by partial hydrolysis of acid aluminum chloride solution using a specific reactor.
Why is alum used as a coagulant?
Alum is one of the most widely used coagulants in the water treatment industry (Benschoten and Edzwald 1990). When added to water, Al ions hydrolyze rapidly and form a range of metal hydrolysis species (Jiang 2015). These cationic species adsorb onto the negatively charged particles and neutralize the charge.
