Table of Contents
15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.
Do you use a brad nailer or finish nailer for trim?
While the downside to a brad is its holding power, finish nails are made from heavier 15- or 16-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is the more suitable choice.
What type of nail gun is best for baseboards?
A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.
What gauge nailer is best for trim?
15-gauge – For the outer nail on casing (through drywall) and for base trim or other large trim , and sturdy install of door jambs, particularly heavy, solid-core doors. Non-structural interior applications such as crown molding, door casings or chair rail offer the most choice in the tools and fasteners you use.
Can you use Brad nailer for trim?
They work well on birdhouses and other thin cuts of wood. Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They’re designed for thicker cuts of wood.
Can I use 18 gauge nails for baseboard?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
Can I use brad nails for baseboard?
You can use a brad nailer to attach baseboards to the wall, though sometimes a finishing nailer might be best. Brad nails are smaller and thinner, ideal for delicate pieces of trim. Finish nails are thicker and have a stronger grip, typically the better choice for tall and long pieces of a baseboard.
What kind of nail gun do I need for 2×4?
As the name suggests, framing nailers are designed for the construction task of framing a structure, such as a house. This requires nailers to drive large 10D nails, up to 3.5 inches in length, into 2x4s.
Can you use 23 gauge nails for baseboards?
In most cases, you wouldn’t use a 23 gauge pinner for baseboards. The nails it can handle are simply too short and thin to do the job. This type of nailer works best for attaching little parts for a small wood project.
Can you use 16 gauge nails for quarter-round?
If you’re doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job. Some DIY users recommend the 16 gauge finish nailer as the most versatile option.
What size trim nails for quarter-round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well.
Can you nail trim into drywall?
Hand Nailing To choose the right-sized nail, add to that 1/2 inch the thickness of the drywall, usually 1/2inch, and the thickness of the trim board. Trim nails should penetrate into wall studs. Standard finish nails usually work fine. However, many carpenters prefer to use galvanized finish nails.
What is a straight finish nailer used for?
Meanwhile, a straight finish nailer is best used for these jobs: General home repair. Nailing for thin boards. Larger spaces/boards with lots of small nails.
What is a finish nailer good for?
Reach for a finish nailer for trim carpentry projects. It gets its name from being the tool that applies the finishing touches to construction tasks and is used for installing baseboards, crown moldings, window trim, and door casings.
What is a brad nailer gun used for?
Brad nailers are used by woodworkers and especially finish carpenters to install casing and base trim up to 3/8 inches thick. For reference: larger guns, called finish guns, shoot 15-gauge and16-gauge nails and are used to install thicker trim (1/2” and up).
What is the difference between 15 gauge and 18 gauge nails?
The difference between them is the gauge nail that they shoot. The most common and readily available types are 15 gauge, 16 gauge, 18 gauge, and 23 gauge. The higher the number, the thinner the nail and the smaller the hole.
What is a 15 gauge nailer used for?
Let’s start with 15 gauge finish nailers. These tools are ideal for projects such as cabinet and furniture building, picture frame assembly, trim and molding installation, and upholstery trim applications. Look for an angled nail magazine on most 15 gauge finish nailers.
What is the difference between a brad nailer and a pin nailer?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
Why is it called a brad nail?
In conclusion, a brad is called a brad because of its nature and its use in both paper and wooden projects. Brads are excellent choices when you want to conceal the nail in your work, unlike finished nails that have a bigger head. Brads have smaller heads and all these qualities are what make a brad a brad.
