Table of Contents
What kind of plywood would you use on roof?
Exterior Plywood is the preferred material for roofing. It also performs well when exposed to moisture over long periods of time. The price is low compared to other roofing materials and the installations are also easy.
What thickness of plywood do you use on a roof?
Minimum Thickness Most roofs will be sheathed in plywood at least 3/8 inch thick. That will suffice on a roof with rafters set 16 inches apart with minimal roof loads. Loads will vary with the pitch of the roof; the flatter the roof, the greater the load on any one section.
What grade of plywood is used for roof sheathing?
1/2 or 3/4-inch Plywood for Roof Sheathing? – Traditionally, 1/2-in CDX plywood was common choice with 24-in rafter spacing. However, heavier roof loads may require the use of 3/4-in CDX plywood for roof sheathing. Roofs with less pitch often carry heavier loads, including snow and ice accumulations in the winter.
Is plywood or OSB better for roofing?
Plywood Holds the Moisture Advantage Over OSB When plywood gets wet, it tends to swell. OSB takes longer than plywood to get saturated, but also takes much longer to dry out. When used as roof sheathing, this tendency to hold moisture means it will degrade faster than plywood when exposed to chronic leaks.
What should I use for roof sheathing?
Typical types of wood used for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, with no edge support, can be used in an area where the snow load is 30 pounds per square foot. With edge support and the same snow load, 3/8-inch OSB can be used.
How thick should plywood be for a shed roof?
Plywood thicknesses for roofs start at 3/8” in areas with light load requirements on rafters at 16” centers. Thicknesses of 1/2 to 5/8 inch are common with rafters spaced at 24” centers. For heavy load rated areas, 3/4-inch-thick plywood is recommended, regardless of rafter spacing.
Can you put new plywood over old on a roof?
The new plywood will have to be nailed to the rafters or roof trusses. But, with the old plywood left in place, it will be considerably more difficult to locate the rafters to ensure proper nail placement.
How thick should my roof sheathing be?
Sheathing Thickness The typical thickness of roof sheathing is about 7/16-inch, which is just under 1/2-inch.
What is the best wood for roofing?
Cedar has earned a reputation for being strong, flexible, and weather resistant – qualities that make for an effective roofing shingle. Among roofing shingle manufacturers, cedar is the go-to material, all thanks to its durability.
Is 7/16 OSB OK for roofing?
Standard types of wood designed for roof sheathing are oriented strand board, known as OSB, and plywood, the most popular being OSB. Sheets of 7/16-inch thick, without edge support, can be used in an area where the snow load is 30 pounds per square foot.
Is CDX plywood good for roof sheathing?
Moisture Differences In reality, CDX plywood can only withstand water for a short period of time. Do not use CDX for roofing, sheds, or other places that are exposed to moisture consistently. The sole exception to this is pressure treated CDX, which can survive for decades without even a protective coating.
What kind of plywood do you use for a shed roof?
Most builders use 15/32 CDX for the roof; it is an exterior-grade plywood with a thickness just under 1/2 inch. The floor needs to be more solid than the roof to support lawn maintenance equipment and people. Use sturdy, 3/4-inch-thick exterior plywood for the floor.
Which is cheaper plywood or OSB?
OSB is less expensive than plywood. To build a typical 2,400-square foot home, OSB may cost $700 less than plywood. OSB is considered by many to be a “green” building material because it can be made from smaller-diameter trees, such as poplars, that are often farmed.
Do I need plywood on my roof?
Aside from shingles and underlayment, plywood decking is one of the most important components in your roof. The plywood decking is integral in keeping your home free of unwanted water and mold. If the plywood has gotten wet, it can have a disastrous effect on the rest of your roof, especially the shingles.
How much is a sheet of roofing plywood?
The thicker the plywood your roofer uses, the more expensive the job will be. Your price could vary depending on how much the roofing company charges for labor, but generally, you can expect to spend between $70 to $100 for each sheet of plywood.
How thick should roof OSB be?
Standard roof sheathing thickness is ½” to ⅝” thick. If you are using OSB for your roof deck, then ⅝” is the recommended thickness. For plywood, which is slightly stronger than strand board, ½” thick is appropriate. Another factor is how far apart your trusses or rafters are spaced.
Can I use screws for roof sheathing?
Screws can be used for even greater withdrawal strength, but should be sized by the building designer. Staples are not recommended for roof sheathing attachment in high-wind areas. It is extremely important to have proper fastener spacing on all panels.
