Table of Contents
Keep the windows and windshield clear. Obtain maximum visibility by turning on low-beam headlights and windshield wipers. Drive slowly and stay farther behind the vehicle ahead. Slow to a crawl on ice.
When driving in snow you should use quizlet?
Terms in this set (36) When driving under snowy or icy conditions: When driving under snowy or icy conditions, you should make speed and directional changes gradually. Never use cruise control when driving on snow or ice because your tires may lose contact with the road and you will lose control of your vehicle.
What should you do if you’re driving in snowy conditions?
drive at a slow speed in as high a gear as possible; accelerate and brake very gently. drive particularly slowly on bends where loss of control is more likely. check your grip on the road surface when there is snow or ice by choosing a safe place to brake gently.
Should I use S gear in snow?
“S1” indicates first gear, which allows the wheels to turn slowly without having to apply the brakes as much, even going downhill, Male said. Putting the vehicle into standard mode allows the driver to have better control on slippery roads. Male said S1 is also more effective to use starting out on slippery roads.
When driving in snow you should use high or low beams?
Never use your high-beam headlights while you are driving in fog, rain, or snow. In such conditions, they can make your vision even worse. High beams will shine directly into the fog or precipitation, which will reflect the bright light back to you.
When driving in snow you should use low beams?
Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet. Slow down when nearing a curve if you are driving the maximum posted speed limit.
How do you drive a car in snow?
Never rev the motor high in the low gears as the car could spin out. Reduce your speed before you start turning the steering wheel and accelerate after you have exited the corner. Never accelerate or brake mid-corner. Reduce vehicle speed to as low as possible when driving through dense fog.
What is the L gear for?
The “L” on the gear shift stands for “Low.” What is the “L” gear used for? Low gear is used when you want the engine power high and the vehicle speed low. This limits stress on your brakes while allowing you to take advantage of your car’s full power in situations like towing and hilly driving.
What gear should you drive an automatic in snow?
If you’re going down a hill, use a low gear and brake gently. Don’t go at the same speed as the car in front: if it hits an icy patch and skids so will you.
When should you use a 4×4 in snow?
The best time to use 4 high is when additional traction is needed on terrain that is not very steep. 4 high is good to use on snow, ice, and muddy roads. Or even when your not operating on paved roads, such as rocky; gravel roads. As well as when your possibly stuck in sand, or on snowy and slippery icy conditions.
What are high beams used for?
When to Use High Beams High beam headlights give off a bright glow that goes as far as 350-400 feet in front of your car. That’s approximately the length of one city block. High beams are aimed directly in front of you and are great for driving at night in rural areas or on poorly lit roads.
When driving in fog or snow Use your high beams use your low beams drive at the posted speed limit drive faster to reduce the amount of time you will be out on the road?
Parking lights. Hazard flashers. Explanation If you must drive in foggy conditions, you should use your low beam headlights, as well as your fog lights, if your vehicle has them. High beams direct their light upwards, where it can bounce off the fog and into your eyes, reducing visibility even more.
When driving in a heavy fog or a snowstorm you should use?
In smoke and fog, use low beam headlights, as high beams reflect the light back to you, creating glare. If visibility becomes so poor that it is no longer safe to continue driving, slow down and move your vehicle well off the road to a safe location. Turn on your hazard lights (four-way flashers).
When should you use headlights?
The law says you must turn your headlights on 30 minutes after sunset and leave them on until 30 minutes before sunrise. You must turn your lights on any time you can’t see at least 1000 feet ahead. Use your low beam headlights whenever it is raining.
When driving on a wet road you should?
When driving on wet roads, you should: Drive slightly faster than the speed limit. Reduce your speed by five to ten miles per hour. Stay close to the vehicle ahead. Explanation When roads become slippery, you should reduce your speed by five to ten miles per hour.
When driving in snow should you drive the posted speed limit or slow down a little?
Adjust your speed as follows: Wet road–go 5 to 10 mph slower. Packed snow–reduce your speed by half.
How do you prepare for snow driving?
Prepare Your Car for Winter Test your battery; battery power drops as the temperature drops. Make sure the cooling system is in good working order. Have winter tires with a deeper, more flexible tread put on your car. If using all-season tires, check the tread on your tires and replace if less than 2/32 of an inch.
