Table of Contents
Common brad nail uses include decorative trim, picture frame and paneling. They work well on birdhouses and other thin cuts of wood. Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding.
When would you use a 18-gauge brad nailer?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
Can I use brad nails for framing?
Finish Nailers and Brad Nailers They are most often used for installing wood trim, where the nail heads will visible. These are versatile tools for a homeowner to own, quite affordable in cost and useful for a variety of purposes—they will work for light framing work, too.
Should I use nails or brads for baseboard?
While the downside to a brad is its holding power, finish nails are made from heavier 15- or 16-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is the more suitable choice.
Can I use 18 gauge nails for baseboard?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
Can you use 16 gauge nails for quarter-round?
If you’re doing lighter molding, such as quarter-round at the bottom of your wall, or installing a chair rail, an 18 Gauge Brad Nailer is fine for the job. Some DIY users recommend the 16 gauge finish nailer as the most versatile option.
Can I use a brad nailer for fencing?
Brad nailers are suitable for cabinetry and interior trim, says Best of Machinery, but the fasteners they shoot are too narrow and short to hold exterior fence boards, which have a tendency to move and warp.
What is the difference between a brad nail and a framing nail?
Brad nailers differ from the finishing nailers mostly by the fact that the nail magazine is not angled as with finishing and framing nailers. The brad nailer is usually used for smaller wood projects, upholstery, and other such precision work.
Can I use a brad nailer for roofing?
Large-body nailers typically include framing nailers and roofing nailers. These nailers are used for more technical projects such as framing out a basement or installing roofing shingles. For woodworking projects, a brad nailer is a good choice.
How long should brad nails be trimmed?
The rule is simple: a brad should be three times as long as the thickness of the material you are fixing. Example: if the material is 15 mm thick, the brad should be 45 mm long.
When would you use a 23 gauge pin nailer?
Delicate Moldings and Pre-Finished Crown When it comes to delicate moldings or pre-finished trim, pros will often switch to a 23-gauge pin nailer. In these applications, an 18-gauge has the tendency to split the wood, especially hardwoods, or leave unsightly marks.
Can you nail trim with a brad nailer?
Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They’re designed for thicker cuts of wood. They’re available in collated finishing nail strips for nail guns or individual pieces.
Can I use a brad nailer for baseboards?
You can use a brad nailer to attach baseboards to the wall, though sometimes a finishing nailer might be best. Brad nails are smaller and thinner, ideal for delicate pieces of trim. Finish nails are thicker and have a stronger grip, typically the better choice for tall and long pieces of a baseboard.
What nailer should I use for baseboard?
A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.
What size brad nails do I use for quarter round?
Use 1 1/4 inch nails for quarter round (with typical 3/4 inch thickness), shoe molding, trim molding over laminate floors, and plywood flooring. Use a size less than 2 inches for paneling, typically 1 inch to 1 5/8 inches. Use shorter nails for board and batten. Less than 1 1/5 inches is ideal.
Can I use a brad nailer for Crown Moulding?
Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. For 3” rise or less crown moulding you won’t need to mark out the studs, as you will nail into the top plates.
Can you use a brad nailer for quarter round?
For the most part, the best tool for nailing quarter-round is a brad nailer. Brad guns shoot thinner nails from the smaller 5/8-inch to 2-inches, which are fine for attaching light moldings such as quarter rounds – you don’t want to split the molding or leave visible holes.