Table of Contents
As it’s already well known, dwelling units currently require AFCI protection. Now the 2017 NEC is expanding protection to guest rooms and dormitory bathrooms and circuits supplying outlets and devices. The 2014 requirement is that a 125 V 15 A or 20A receptacle has to be located within 50 feet.
Where are arc fault breakers not required 2017?
AFCI protection is not required for outlets located outside or in garages or bathroom areas. (B) All 15A or 20A, 120V branch circuits supplying outlets in dormitory unit bedrooms, living rooms, hallways, closets, bathrooms, or similar areas.
Where do I need arc fault breakers?
AFCI protection is currently required for all 15 and 20 amp branch circuits providing power to outlets* in residential family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, and similar rooms or areas.
Where are arc fault breakers required 2016?
AFCI REQUIREMENTS IN DWELLINGS o Kitchens, family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, laundry areas (including laundry areas in a garage), hallways, or similar rooms or areas, and dormitory units.
Does Electrical Code require arc fault breakers?
Are AFCI Breakers Required in Kitchens? Yes, Arc fault AFCI protection was expanded into the NEC code in 2014 and required all electrical circuits in the kitchen.
Do kitchens require AFCI?
The latest National Electrical Code requires both AFCI and GFCI protection only in kitchens and laundry rooms. And within those rooms, the Dual Function AFCI/GFCI Receptacle provides what is called “feed-through” protection, which means it provides protection for all wiring and extensions attached to the load side.
Are arc fault breakers required in garage?
The 2017 National Electrical Code (NEC) requires the protection of an arc fault circuit interrupter (AFCI) for 15 and 20 amp circuits in all newly built residential areas, but they are not needed in bathrooms, garages, or outdoor areas.
Where are arc-fault breakers required 2021?
16 states that AFCI protection is required for all 120-Volt, single phase, 15 and 20 amp branch circuits supplying outlets or devices installed in living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, laundry areas, and similar rooms or areas.
Does refrigerator need AFCI?
Refrigerator Circuit A modern refrigerator requires a dedicated 20-amp circuit. This circuit usually does not require GFCI protection unless the outlet is within 6 feet of a sink or located in a garage or basement, but it generally does require AFCI protection.
Where are AFCI outlets used?
AFCI outlets are recommended for the following locations in a house: family rooms, dining rooms, dens, bedrooms, closets, hallways, recreation rooms, sunrooms.
Are arc-fault breakers required in Michigan 2019?
In Michigan, arc-fault circuit-interrupter protection of 15- and 20-ampere circuits are no longer required in one-family and two-family dwellings. This also included one-family townhouses that have individual means of egress and are not more than three floors in height.
Where are arc-fault breakers required in Ontario?
The Canadian Electrical Code requires homes to have arc-fault circuit protection installed for 125Vac, 15A and 20A circuits supplying receptacles throughout the home (with some exceptions).
When were AFCI required?
In 1999, AFCIs became a requirement in the National Electrical Code (NEC®). An AFCI breaker provides a higher level of protection than a standard circuit breaker by detecting and stopping a hazardous arcing condition before it can become an electrical fire.
Does microwave require AFCI?
A dedicated 20-amp circuit is needed to feed the microwave oven. Since the appliance is plugged into an outlet, AFCI protection is required.
Where are arc fault breakers required 2020?
In the 2020 edition of the NEC®, Section 210.12 requires that for dwelling units, all 120-volt, single-phase, 15- and 20-ampere branch circuits supplying outlets or devices installed in dwelling unit kitchens, family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms,.
Where are GFCI breakers required 2020?
The 2020 NEC is very clear that GFCI protection is only required for 125‐volt, 15‐ and 20‐ampere receptacles in areas having an equipotential plane, in outdoor locations, in damp or wet locations, or in dirt confinement areas for livestock.
Does garage need AFCI or GFCI?
Your garage needs to be GFCI protected, according to the 2008 and later editions of the NEC handbook. This includes garage door openers and garage lights that are connected to an outlet. In addition, AFCI protection is required for 5-amp and 20-amp 120/125-volt circuits.
Do garage lights need to be AFCI protected?
The shorter list is areas not requiring AFCI protection: unfinished basement areas, attached or detached garages, outdoor lighting and receptacles, accessory buildings and bathrooms are not required to be fed via AFCI protected circuit.
Do all garage receptacles need to be GFCI?
Yes, all garage outlets must be GFCI-protected-no exceptions. Since 2008, GFCI outlets have been required for “all 125-volt, single-phase, 15 and 20-amp outlets” in the garage. In fact, both the NEC (National Electric Code) and the IRC (International Residential Code) require this.
Can you put a GFCI outlet on a AFCI breaker?
The 2008 National Electrical Code (NEC) requires AFCI breakers in nearly all new construction. They will not interfere with the operation of ground fault circuit interrupter (GFCI) outlets, so it’s safe to install AFCIs on circuits that include GFCI outlets.
What appliances require AFCI?
Yes, you need AFCI protection. As of the 2017 NEC, AFCI protection has been extended to all 15 and 20A, 120V branch circuit outlets in all dwelling unit locations. This includes dedicated appliances such as furnaces and dishwashers, and even smoke detector circuits.
Do smoke detectors need to be arc fault protected?
Smoke alarms connected to a 15A or 20A circuit of a dwelling unit must be AFCI protected if the smoke alarm is located in one of the areas specified in 210.12(B) [see the Figure).
