QA

Question: Where Can I Buy A Drain Snake

How much does it cost to buy a drain snake?

The average plumber cost to snake a drain is $100 to $275 for a toilet, sink, tub, shower, or laundry drain. The average cost to snake a main line is $150 to $500. Roto-Rooter prices are $225 to $500 on average to snake a drain.Cost To Snake A Drain. Type Average Cost Severe Clog Requiring Hydro Jetting $250 – $800.

What can I use instead of a drain snake?

You can also make your own drain snake at home with a pipe cleaner or a wire hanger. Cut a 2-liter bottle into a spiral with “teeth” in it, which is a very effective and cheap alternative to store bought drain snakes. Wet and dry vacuums are powerful appliances with a lot of suction.

Can you snake a drain on your own?

For smaller clogs, snaking your own drain is possible. Routine, minor sink clogs from hairballs or food remnants are typically located in the U-shaped trap directly below the sink or only a few feet deeper in the drainpipe. They may be cleared by using a light-gauge, hand-operated auger.

What is the best snake drain?

The 8 Best Drain Snakes of 2022 Best Overall: FlexiSnake Drain Millipede at Home Depot. Best for Toilet: Ridgid 59787 K-3 Toilet Auger at Amazon. Best Budget: Green Gobbler Hair Grabber Drain Tool at Amazon. Best for Hair: BrassCraft Plastic Hair Snake at Home Depot. Best Extra Long: Best Powered: Best for Sinks: Best Kit:.

Can a drain snake damage pipes?

If you have a clogged pipe, a drain snake is a simple and cheap tool you can use to fix it. These are advertised as devices that anyone can use to unclog a drain. But if used improperly, drain augers could make the clog worse. You could jam the obstruction in there tighter, or worse, do damage to your pipes.

Can I snake my shower drain?

Sometimes the best way to unclog a shower drain is with a drain snake, sometimes called a manual auger or electric auger. If it’s electric, you’ll need a power drill to run the plumber’s snake. Then turn the handle counterclockwise to back the snake out of the drain. Go slowly, so you don’t lose the clog.

How do you make a homemade drain snake?

Pour 3/4 of a gallon of cold water into a mop bucket, and then add 3 cups of caustic soda. Stir the mixture well, and it will soon begin to fizz. Next, pour it into the clogged drain and leave for 20-30 minutes, then flush it with pure hot water – repeat as necessary.

Will Coke unclog drains?

Coke or Pepsi are great for vanquishing a clog! Coke and Pepsi are loaded with phosphoric acid, which breaks down buildup that can clog your drains! Phosphoric acid can even remove lime scale and other tough buildup that regular cleaners struggle with.

Can’t get the snake down the drain?

Too much force – When you’re trying to dislodge a blockage, it can be tempting to try and force a snake cable through the drain too fast. If you force it, sometimes the cable can bend back on itself or kink. Instead of forcing the cable, extend the snake cable a few inches at a time until you reach the clog.

How do you unclog a drain if a snake doesn’t work?

If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink. Set a bucket under the trap.

Is Liquid plumber safe?

Lab tests confirm that all Liquid-Plumr® products are safe for all household plumbing. However, we do not recommend using clog removers in rubber pipes. The products may damage rubber.

Can I use a drain snake on PVC pipe?

PVC pipes are an improvement over cast-iron pipes, because they have smooth walls that don’t allow debris to cling, so if you have to clear a clogged drain deep in the pipe, you can usually do it with a plunger or drain snake.

What sizes do drain snakes come in?

Major types of sewer cables & drain snakes DRAIN TYPE PIPE SIZE RECOMMENDED CABLE SIZE BATHTUB 1-1/2″ — 2″ 1/4″ OR 5/16″ SHOWERS 2″ — 3″ 5/16″, 3/8″ OR 13/32″ FLOOR DRAIN 3″ OR MORE 3/8″, 13/32″, 1/2″, 5/8″, 3/4″ OR 0.55″ FLOOR DRAIN 4″ — 5″ 1/2″, 5/8″, 3/4″, 0.55″ OR 0.66″.

How often should you snake your drain?

If your drains are clogging every month, it’s wise to get them cleaned right away. As for maintenance, we recommend cleaning them every two years, but we may suggest more frequent cleanings if you have a large household and use the sinks a lot.

How far should a drain be from a snake?

When to Snake a Drain Use a drain snake when your sink, shower, or tub drain is draining slowly or is not draining at all due to soft clogs located up to 15 to 25 feet down the line.

Can a plumbing snake go down a toilet?

To unclog toilets that couldn’t be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.