QA

Question: Where Can I Buy Simichrome Polish

Is Brasso the same as Simichrome?

Brasso Results The smell was pretty equivalent to that of the Simichrome as well so no major difference there. The main difference is that after polishing for a while I was unable to attain quite the same level of shine and smoothness as the Simichrome.

What is Simichrome polish used for?

Simichrome Polish is a soft paste polish for chrome, silver, gold, aluminum, brass, or virtually any other metal. Cleans to a brilliant shine while leaving a protective film to retard oxidation. Apply a small amount of Simichrome Polish using a clean polishing cloth.

What grit is Simichrome polish?

While they did not address the comparative size to the grit of sandpaper, we were told that the particle size of Simichrome polish is 8 to 10 microns. Looking at the Gesswein Canada website’s Grit = Micron = Mesh conversion chart, 9 microns = 1800 grit.

Where is Simichrome polish made?

Simichrome Polish is made in Germany. It is a cream type paste, available in tubes and cans.

What is similar to Simichrome?

If you are looking for a substitute, Mother’s Aluminum & Magnesium polish, available at Wal Mart for less than $4.00 a bottle. In the automotive section. This stuff is easier to use than Simichrome, also.

Is Simichrome toxic?

Simichrome is a unique, non-toxic and non-corrosive compound.

Is Simichrome abrasive?

Simichrome is specially-formulated using the finest micron particle size abrasive of any polish available combined with special cleaning agents. Because the abrasive particles are so fine, Simichrome will not harm uncoated metals surfaces.

Can you use Simichrome on silver?

What metals can Simichrome be used on? Simichrome is the perfect cleaner and polish for all ferrous and non-ferrous metals like brass, copper, chrome, pewter, stainless steel, gold, silver, sterling, platinum virtually all uncoated metals.

Does Simichrome remove rust?

Wipe the polish/rust residue off the wheel rim with a soft paper towel or cloth. Change to 0000 steel wool ( the finest grade )and gently rub the Simichrome onto the surface, polishing the remaining rust and corrosion from the wheel.

What can I use instead of Brasso?

If you’re in a pinch, you can also try any of the following ideas that will also clean brass quite easily. Ketchup. Squirt a dollop of ketchup on a rag and rub over the surface. Vinegar. Dissolve 1 teaspoon salt in 1/2 cup vinegar and add enough flour to make a paste. Lemon.

What cleans brass better than Brasso?

Ketchup, Tomato Sauce, or Tomato Paste Tomatoes contain an acid that helps to remove tarnish on brass and other metals; that’s why applying a tomato-based product can work wonders on your brass. Ketchup, tomato paste, and tomato sauce all work equally well. Apply a layer to your brass and leave it on for an hour.

How fine is Brasso?

It is a mild solvent and an extremely fine abrasive, so when applied to the reflective surface of the disc and rubbed radially (in straight lines between the edge and centre), it can smooth scratches and reduce their effect.

Who makes Simichrome polish?

SIMICHROME Polish® by HAPPICH (GHE), The original for more than 60 years. SIMICHROME® The original for more than 60 years The metal polish with cult status which has been part of HAPPICH’s product portfolio since 1950.

What are the ingredients in Brasso?

Ingredient Information Water. Calcium Carbonate. Oxalic Acid Dihydrate. Pumice. Tall Oil. Isopropyl Alcohol. Ammonium Hydroxide. Aluminum Magnesium Silicate.

How do you test for Bakelite with Simichrome?

To test with Simichrome, sparingly apply a dab of the cream to a soft cloth and gently rub a small spot on the inside or back of the item being tested. If it is Bakelite, the cloth should turn yellow with ease (although the color may vary from light to dark). If a piece is lacquered, it may test negative.

Is Brasso good for brass?

Brasso works on brass, copper, chrome, bronze, stainless steel, pewter, and aluminum. It’s a cleaner, polish and protection solution in one, for when you need to buff up lackluster brass, kitchenware and more – no polishing wheel required.

Can you use silver polish on other metals?

Simply wipe the polish on and rinse it off, then buff to a shine. It is suitable for cleaning jewelry and silver flatware. It will also work for brightening other metals, including copper, gold, and platinum.

Can I polish stainless steel?

You can polish the surface of stainless steel using water, non-toxic cleaners like vinegar or olive oil, or a specialized steel cleaner. Polishing stainless steel the right way will help you thoroughly clean the appliance and avoid scratching it further.

Does vinegar harm Chrome?

So will vinegar damage chrome? Vinegar may be a mild acid, but it’s an acid nonetheless. Prolonged exposure to vinegar will damage chrome finishes by eating the finish right off of your fixtures. For the ultimate protection against limescale and hard water buildup, invest in a quality water softener for your home.

Does Flitz remove scratches?

“I bought a $10 tube of Flitz Polish, the kind that can be used on chrome and polymer. After a second application and some casual buffing while watching my favorite TV show, I was in amazement! I had to take about 25 double takes when I realized any scratch on this gun was completely gone.

How do you remove rust from polished metal?

Mix water and baking soda into a thick paste and spread the paste all over the metal, making sure that rusty spots are well covered. Let the paste sit on the object for an hour or so. Use steel wool or a wire brush to scour the object and remove the rust. Rinse the paste off with water and dry thoroughly.

Does WD 40 clean brass?

We like to use WD-40. It is not only very easy to use, but is also quick and very effective. All you need to do is coat the gold and brass lamp with a layer of WD-40, which is a great to clean brass and let it sit for about 15-30 minutes. Take a clean cloth and rub the lamp in circular motions drying and buffing it up.

Can you use toothpaste to clean brass?

This might surprise you, but yes, you sure can clean brass using just toothpaste. All you need to do is to use reusable paper towels like a clean cloth to put a small amount of toothpaste onto your brass. Let the toothpaste sit for a few minutes, and then rinse it off with cold water.

Can you soak brass in vinegar overnight?

Vinegar Soak Remove tarnish from a relatively small, solid-brass object such as a bookend or souvenir by soaking it in a mixture of one part white vinegar, two parts water. Submerge the piece for several hours, then wipe it with a water-dampened white cloth. Buff the brass dry with another soft white cloth.