QA

Where Should The Pleasure Craft Licence Number Be Displayed

How should I display the licence number on my pleasure craft? You must display the licence number on both sides of the bow, above the waterline, in block characters that are at least 7.5 centimetres (3 inches) high and in a colour that contrasts with the colour of the bow.

Where do boat boat numbers go?

Boat registration numbers should be in a plan, block, easy to read font; must be able to be read left to right. They should be placed on the front half of the vessel’s bow and should be the only numbers placed in that area. Numbers should be three inches in height and in a contrasting color to the boat.

What information is shown on the compliance notice on a boat up to 6 m in length?

Compliance notices on boats up to 6m (19’8”) will also contain recommendations for safe capacity limits in good weather. They will indicate the maximum safe outboard motor size and how much weight the boat can hold including the number of people on board and what they are carrying.

What is the number on the front of a boat?

Like a Vehicle Identification Number given to automobiles, the HIN is used to identify each boat. HIN’s are located at the stern of the boat, usually on the starboard side of the transom, or as close to that area as possible. It’s used to register your boat and to track your boat’s history.

Where do I find the compliance number on a boat?

This metal label is attached to your boat’s hull and it should be visible from the operator’s seat.

How should a vessel’s registration number be displayed?

How should a vessel’s registration number and validation decal be displayed? Number must be painted, applied as a decal or otherwise affixed to both sides of the bow, placed where it can easily be read. Number must be left to right on both sides of the bow.

What information is found on the compliance notice?

What information can be found on a compliance notice? maximum load capacity (Gross load capacity); maximum engine power; maximum number of persons allowed on board.

What does the compliance notice include?

The Compliance Notice confirms that the boat has been built according to the construction requirements outlined in the Small Vessel Regulations. The notice must be attached to the helm of the boat, where it can be clearly seen from the operator’s seat.

What information is on a boats compliance notice?

The compliance notice states that the vessel complies with the construction requirements when it was built or imported (whichever date was most recent). The notice also shows the maximum number of people that can safely board the vessel. This is also known as a “capacity label.”Jul 6, 2010.

What do the numbers on boats mean?

Your vessel will also have (if manufactured since 1972) a Hull Identification Number which is the 12 digit serial number of your vessel. This number indicates the boat manufacturer, its serial number, and the month and year of production. This number is used to register the boat, and to identify an individual boat.

Why do ships have numbers on the front?

The numbers arranged in a vertical line are called draft marks. They measure the distance between the waterline and the lowest area of the ship’s hull (the draft) that varies by cargo loading.

What are the numbers on the side of a ship?

Draft marks are numbers marked on each side of the bow and stern of the vessel. Draft marks show the distance from the bottom of the keel to the waterline. The draft numbers shown in the figure are 6 inches high and 6 inches apart.

What is the compliance number?

The Compliance Hotline, 800-910-6707, is designed to give you an avenue for reporting concerns and violations to SOM’s management in a confidential manner, without fear of retaliation.

What is compliance label?

What is label compliance? Label compliance is the process of ensuring that a product label meets all pertinent regulatory requirements. But it extends beyond government regulation and into industry standards.

Where is the hull serial number on a boat?

The HIN must be located: Where it is clearly visible when the boat is in the water and… On the outside starboard (right) side of the transom. If the boat does not have a transom, the HIN must be displayed on the right side at the rear of the hull.

How do you put CF numbers on a boat?

Letters must be separated from the numbers by a space or hyphen. For example: CF 5573 JS or CF-5573-JS. No other numbers may be displayed in the vicinity of the registration number. Registration stickers must be affixed on both sides of the bow, three inches behind (toward the stern) and in line with the number.

Where do Jet Ski registration numbers go?

Displaying your registration stickers The registration number must be clearly displayed on each side of the craft above the waterline. It must not be obscured whilst the craft is in use.

Where can the registration numbers be displayed on a displacement hull?

Registration numbers Registered vessels are assigned a registration number. This number must be displayed at all times on both sides of the hull, in figures at least 150mm high (100mm for Personal Watercraft (PWC) and sailing vessels).

What is vessel registration number?

A boat registration number acts like a boat’s license plate. A registration number allows port and government authorities to identify your vessel while in use. Boat lettering or numbers then need to be displayed on your boat, typically on the front third of the boat.

What useful information can be found on a capacity plate?

Look for a capacity plate near the operator’s position or on the transom of the boat. This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather.

What is the compliance label number?

The Compliance Notice (Capacity Label) will include the following information: Name of manufacturer. Manufacturer’s identification code, MIC. Model type or number, or both. Maximum recommended ratings for load, number of occupants and power.

What should be included on a float plan?

You should leave a float plan that: Describes the vessel, including its registration number, length, make, horsepower, and engine type. Includes the description and license plate of the tow vehicle and trailer. Gives the number of passengers, their names and addresses, and a contact in case of emergency.