QA

Quick Answer: Which Law Explains The Flocculating Power Of Ions

According to Hardy schulze law the flocculating power of an ion increases witha decrease in sizeb increase in sizec decrease in charged increase in charge.

What is coagulation Hardy Schulze law?

> Hardy Schulze rule states that the amount of electrolyte required for the coagulation of a definite amount of a colloidal solution is dependent on the valency of the coagulating ion. Coagulating ion is the ion which has the charge opposite to the charge of the colloidal particles).

What is the flocculating ion?

Coagulation or precipitation:-it is a process of aggregating together the colloidal particle so as to change them into large sized particles which ultimately settles as a precipitate. The ion which is responsible for neutralization of charge on the colloidal particles is called the coagulating ion or Flocculating ion.

Who gave law of coagulation?

Burton and Bishop (1920) have stated a rule attempting to establish a relationship between concentration of a hydro phobe and the coagulation value of electrolytes as follows: 1.

What is flocculating power?

Hint: Flocculating value or the coagulating value is the amount of the electrolyte which is needed so that 1 litre of colloidal solution precipitates easily. The coagulating power or flocculating power is the reciprocal of coagulating value or flocculating value.

What is the coagulation process?

Coagulation, in physiology, the process by which a blood clot is formed. The formation of a clot is often referred to as secondary hemostasis, because it forms the second stage in the process of arresting the loss of blood from a ruptured vessel.

What is hardy Schulze law give example?

The coagulating or flocculate capacity of an electrolyte increases with increase in charge is known as Hardy – Schulze law. Example 1: To coagulate a negative sol, the coagulating capacity of positive ion is Al+3 > Mg+2 > Na+ Example 2: To coagulate a positive sol the coagulating capacitor of negative ion.

What is the purpose of flocculation?

Effect on Turbidity As with coagulation, the purpose of flocculation is not to directly reduce turbidity or suspended solids, but to prepare the solids for subsequent removal. Flocculation reduces the number of suspended solids particles as smaller particles combine to form larger ones.

What is the difference between flocculant and coagulant?

Coagulation is a chemical process. Flocculation is a physical process. Coagulants such as inorganic salts of aluminum or iron that neutralize the suspended particles are added during coagulation. Flocculant such as an organic polymer that involves in bridging and strengthening the flocs is added.

Why is flocculation important?

Applying flocculation ensures a high flux over filtration units as well as efficient and cost effective separation of cell material from supernatant. Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment.

What does gold number 12 mean?

> The gold number is defined as the minimum mass of the colloid in milligram that is added to the 10ml of red gold sol to protect it from the coagulation when 1 ml of 10% NaCl is added.

Why does potash alum stop bleeding?

Alum is used to stop blood from a cut. It acts as a hemostatic agent, allowing the blood clot to form. The blood gets flocculation due to having greater ionic strength and the astringent chemical causes local vasoconstriction. Thus, blood is negative sol and sol particles are coagulated more efficiently by Al3+ ions.

What is Tyndall effect?

Tyndall effect, also called Tyndall phenomenon, scattering of a beam of light by a medium containing small suspended particles—e.g., smoke or dust in a room, which makes visible a light beam entering a window. The effect is named for the 19th-century British physicist John Tyndall, who first studied it extensively.

Which has maximum flocculation power?

Lower the coagulation value, more efficient is the electrolyte in causing coagulation of sol. We can say coagulation value is inversely proportional flocculation value. having lowest charge will have minimum power and hence have maximum flocculation value. Thus, the correct option is C.

Which has maximum flocculation value?

Fe(OH)3 is positively charged. Hence Cl- ions with minimum opposite charge will have maximum flocculation value (minimum cagulating power).

How do you calculate flocculating value?

Complete step by step solution: “The minimum concentration of an electrolyte that is required to cause the coagulation or flocculation of a sol is known as flocculation value.” It is expressed in terms of millimoles per litre. 2 mL of 1 M NaCl contains 2 / 1000 mol = 2 millimole.

What are the 4 steps of coagulation?

1) Constriction of the blood vessel. 2) Formation of a temporary “platelet plug.” 3) Activation of the coagulation cascade. 4) Formation of “fibrin plug” or the final clot.

Is coagulation good or bad?

Blood clotting is a natural process; without it, you would be at risk of bleeding to death from a simple cut. Blood clots inside the cardiovascular system are not always so welcome. A clot in the coronary arteries near the heart can cause a heart attack; one in the brain or the arteries serving it, a stroke.

What is the normal coagulation process?

Blood coagulation is a process that changes circulating substances within the blood into an insoluble gel. The gel plugs leaks in blood vessels and stops the loss of blood. The process requires coagulation factors, calcium and phospholipids. The coagulation factors (proteins) are manufactured by the liver.

What is modification in Hardy Schulze law?

Thus, Hardy-Schulze law can be modified in terms of the polarising power of the flocculating ion. Thus, the modified Hardy-Schulze law can be stated as ‘the greater the polarising power of the flocculating ion added, the greater is its power to cause precipitation. ‘.

What is gold no in chemistry?

The Gold Number is the minimum weight (in milligrams) of a protective colloid required to prevent the coagulation of 10 ml of a standard hydro gold sol when 1 ml of a 10% sodium chloride solution is added to it. It was first used by Richard Adolf Zsigmondy.

What are the application of colloids?

A colloid is used as thickening agents in industrial products such as lubricants, lotions, toothpaste, coatings, etc. In the manufacture of paints and inks, colloids are useful. In ball-point pens, the ink used is a gel (liquid-solid colloid).