Table of Contents
The induction motor can’t run at synchronous speed because it is not possible to run the motor without load. Even the motor is at no load, there would be core loss,copper loss and air friction loss.In a nut shell, the motor slip can not be zero in any case.
What happens when induction motor runs above synchronous speed?
If an external mechanical system drives the rotor above synchronous speed, the induction machine acts as a generator. If the rotor is rotating below synchronous speed, the induction machine is a motor.
Can an induction motor be synchronous?
Thus, an induction motor can never run at the synchronous speed and hence is the name asynchronous motor. Synchronous motor: The stator of a synchronous motor is similar to that of an induction motor. The rotor of the synchronous motor consists of an electromagnet, produced by a dc excitation.
Which motor runs at synchronous speed?
Synchronous speed is a significant parameter for the rotating magnetic field-type AC motor. It is determined by the frequency and the number of magnetic poles. A collective name for the motors that run at the synchronous speed is the synchronous motor.
Does synchronous motor runs at synchronous speed?
Synchronous motors run at synchronous speed. In synchronous motors, the stator has 3 phase windings and is excited by 3 phase supply whereas the rotor is excited by DC supply. The 3 phase windings provide rotating flux whereas the DC supply provides constant flux.
What is standstill rotor EMF?
When rotor is stationary i.e. s = 1, the frequency of rotor e.m.f. is the same as that of the stator supply frequency. The value of e.m.f. induced in the rotor at standstill is maximum because the relative speed between the rotor and the revolving stator flux is maximum.
What happens if fifth harmonics is given to induction motor?
It will rotates in normal operation. Either short circuit or open circuit occurs. The sinusoidal components having frequency five times of fundamental are known as fifth harmonics. Hence induction motor will rotates in reverse direction because of reverse phase sequence of fifth harmonics.
What 3 things are needed for an induction motor to work?
A 3-phase induction motor includes two essential components namely the stator & the rotor. In this motor, the stationary part is the stator whereas the rotating part is the rotor. In this motor, the load is connected to the shaft. Three-phase armature winding can be wound over the stator.
What are the advantages of synchronous motor?
Advantage or Merits: One of the major advantage of using synchronous motor is the ability to control the power factor. An over excited synchronous motor can have leading power factor and can be operated in parallel to induction motors and other lagging power factor loads thereby improving the system power factor.
Why is it called synchronous speed?
The synchronous speed is the speed of the revolution of the magnetic field in the stator winding of the motor. Thus, an AC machine in which the rotor moved at a speed and built a constant relationship between the frequency of the voltage in the armature winding and the number of poles is called a Synchronous Machine.
Why does alternator run at synchronous speed?
This property is due to the inertia of the rotor; it cannot instantly follow the rotation of the magnetic field of the stator. Once the rotor nears the synchronous speed, the field winding is excited, and the motor pulls into synchronization.
Why the speed of synchronous motor is constant?
When you supply 60 Hz (or 50 Hz), the motor will spin at one speed, which is dependent on the number of poles. This rotational speed will be constant with different mechanical loads, up to the point that the motor (or coupling) fails, hence it is a “constant speed” motor.
How can synchronous motor be stopped?
The methods that are employed for Braking of Synchronous Motor are: Regenerative braking while operating on a variable frequency supply. Rheostatic braking. Plugging.
What is the difference between synchronous speed and actual speed?
The synchronous speed of an AC motor is determined by the frequency of the source and the number of poles. The RPM is calculated by multiplying the frequency times 60 and dividing by the number of pairs of poles. Actual speed of the induction motor will be less than the synchronous speed.
What is the working principle of synchronous motor?
The principle of operation of a synchronous motor can be understood by considering the stator windings to be connected to a three-phase alternating-current supply. The effect of the stator current is to establish a magnetic field rotating at 120 f/p revolutions per minute for a frequency of f hertz and for p poles.
What happens when slip is zero?
Zero slip means that rotor speed is equal to synchronous speed. If rotor is rotating at synchronous speed in the direction of rotating magnetic field the, there will be no flux cutting action, no emf in the rotor conductors, no current in rotor bar conductor and hence no development of electromagnetic torque.
Which type of Induction motor is best for emf?
10. Which type of Induction motor is best for e.m.f injection method? Explanation: E.M.F injection method is used to control the speed of Induction motor. It is only applicable for WRIM because WRIM rotor consists of copper windings connected in star connection.
What is slip at standstill?
At standstill, induction motor slip s is 1, hence the frequency of induced EMF in the rotor of the induction motor is same as that of supply frequency and reduces with increase in speed (due to the reduction in slip).
Which induction motor has maximum speed?
Synchronous and full load speed of amplitude current (AC) induction motors Speed (rpm) Number of Poles Frequency (Hz, cycles/sec) Synchronous Full Load 2 3600 2900 4 1800 1450.
What is the efficiency of induction motor?
Efficiency of three-phase induction motors can vary from 85% to 96%. See the chart below for torque vs. slip. Induction motors of 50-100 HP for industrial applications vary in weight from 700 to almost 1,000 lbs.
What is harmonics in induction motor?
Space harmonics fluxes are produced by the windings, slotting, magnetic saturation, inequalities in the air gap length. These harmonic fluxes induce voltages and circulate harmonic currents in the rotor windings. The resultant air-gap flux is free from third harmonics and its multiples.
