QA

Quick Answer: Why Do Only Half Of My Led Strip Lights Work

If half your LEDs are not working, it means that there are 2 strings of LEDs wired together in parallel – each parallel string has LEDs in series. You likely have a broken wire, or an LED bulb is broken or out of the socket.

Why is only one side of my LED lights working?

LED strip lights are the go-to lights for straight lines, right angle corners, and subtle under lighting.Troubleshooting LED Strip Lights. Issue Possible Cause Solution Won’t Light Up (Hardwire) Loose wires; too much,insulation Check wire connections; make sure insulation is stripped at least half an inch on the ends.

Why are some of my LED lights not working?

Heat buildup, screwing bulbs too tightly, or placing LEDs in improper electrical circuits and accessories are common causes of LEDs stopping working. In addition, poor quality capacitors, drivers and diodes are also leading factors in reducing the life of LED bulbs.

How do you reset LED Strip Lights?

Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds. If done successfully, the light strip will flash five times then cycle through the colors blue, green and red.

Why are half of my LED lights dim?

Voltage drop comes into play when your LED strip runs, your wiring, or both, are too long. The resistance in these conductors adds up – and your LEDs start to operate below their optimal voltage range, resulting in dimming.

How can you tell if an LED bulb is blown?

It’s an LED. Easiest way to see if it is damaged is to connect it to a battery and see if it lights up. The difficulty is that you can’t disassemble the the white plastic unit, so if the LED does not light, the connection wires, resistor or LED itself may be damaged.

Why are half string lights out?

If only half the strand is out If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way down, wiggling them to check for looseness. If it flickers, that’s your cue to replace it.

Can you cut LED Strip Lights?

Can I Cut The LED Strip Light Anywhere Else? You can, but we wouldn’t recommend it. By cutting an LED strip light anywhere other than the designated cutting point, you run the risk of damaging the components on the strip itself, as well as the circuit board. This may ultimately result in the strip light not working.

How long do LED Strip Lights last?

LEDs have an unbelievably long expected life-span, compared to both incandescent and fluorescent lights. With an average life-expectancy of some 50,000 hours, LED strip lights will still be burning bright in 17 years’ time, long after their traditional counterparts will have expired.

Do LED lights burn out?

Unlike incandescent light bulbs, LEDs don’t produce light using heat. This is part of what makes them so energy efficient. The downside is that their components can be sensitive to overheating, which can cause them to burn out prematurely.

Which LED light is best for eyes?

Soft white LED bulbs still give off a bright cast. Soft white is a better option because it isn’t as glaring, although there are warm hues, as well. Regardless of the shade, LED bulbs are among the safest lights for your eyes. They rank highest in energy efficiency, too.

How do I connect my LED lights to my phone?

How to Use Smart LED Strip Lights with EZ Mode Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account. Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds. Step 3: Connect the App.

Why are my LED light strips not bright?

The longer the flexible led strip light tape, the more resistance the current has to overcome, hence it loses voltage along the way. The result of voltage drop is that the light emitting diodes (SMD chips) at the end of the strip are less bright than those at the start, which is closest to the power supply.

Do LED strips get dimmer over time?

It’s not just about brightness decline – your LED strip may shift in color! In addition to dimming over time, if materials degrade a different rates, an LED can actually begin to shift in color over its life.

How do you fix voltage drop in LED strips?

To prevent voltage drop: Divide long runs of LED strip lights into shorter strips, then connect additional “Parallel” wires from the power supply to each new LED strip. This process can be repeated as many times as needed.

Why is a section of my LED lights out?

If one of your LED light strands isn’t working, it’s probably just because it has a bad bulb. If one bulb dies, it can cause the rest of the strand to stop working. The only way to fix the problem is to find the bad bulb. Sometimes only a section of the lights will go out, making your job pretty easy.