Table of Contents
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project.
Do you need to wedge new clay?
Whether you’re handbuilding, sculpting, or throwing on the wheel, for best success your clay must be soft, pliable, and void of air bubbles/pockets. If you’re using clay from a fresh bag you’re pretty much good to go as-is. If you’re throwing, you likely will want to wedge it a little to improve pliability.
What will happen if you do not wedge your clay?
In fact, improper wedging will more often add bubbles and you’ll just dry out your clay in the process. Simply make sure the pieces get enough drying time and have no plaster mixed in with the clay- that IS a sure recipe for explosions.
What happens if u press a clay?
Answer: if you will press a clay the clay will mold depends what shape or texture that you use. Explanation: because clay is a stiff, sticky fine-grained earth, typically yellow, red, or bluish-gray in color and often forming an impermeable layer in the soil.
Does Clay shrink when fired?
Clay shrinks both in drying and in firing. Different clay bodies shrink at different rates which can be as little as 4%, or as much as 15% for some clay bodies. We also found through out after years of firing that even with the same clay body, shrinkage can vary 1-2% from batch to batch.
Will clay mold?
It’s true; people can have mold reactions to clay that has mold in it. We’ve heard about several potters that have had allergic reactions to mold in clay. Usually for it to kick up, though, there has to be visible mold—such as you get when a bag of moist clay has been hanging around for a fair amount of time.
Where do you wedge clay?
How to wedge clay? Place your hands on opposite sides of roughly rounded mass of clay. With your right hand, push down on the clay while rolling it forwards. Contain the clay with your left hand to prevent will sideways movement.
What should I wedge clay on?
Every potter needs a surface to wedge clay on, and there are many different types. The most common are plaster, plaster covered in canvas, and plywood covered in canvas. Other possibilities are concrete, granite, masonite, concrete board and hardibacker board. The simplest wedging surface is a piece of canvas.
Does Clay go bad?
Does clay go bad? No, but it may grow mold. This is good bacteria and will be good for the clay’s workability.
Why does my clay stink?
When clay is stinky, though, it’s usually good, since that smell only comes when the clay has spent some time in the wet condition. If your clay stinks, that’s a good thing. It means there’s bacteria in it, living on the organic matter in it.
How do you throw away clay?
As long as you do not add nonbiodegradable ingredients like paint you should be able to water it down or break the clay into small pieces and put it in your compost bin when you are finished. Even if you have to throw it away, you will know you are not introducing petroleum products and chemicals into the environment.
How do you wedge a large amount of clay?
If you’re throwing large pots, try using softer clay and throw it dry (or with less water) to avoid degenerating it to mush. Wedge using the weight and strength of your whole body on a wedging table of the proper height. Ideally, the table height should be equal to the distance between fingertips and floor (figure 1).
Why does my polymer clay bubbles after baking?
Those bubbles are caused by trapped air in your polymer clay. Most likely put there, by the way you conditioned your clay. The biggest culprit for trapping air is folds. When you fold over your strip of clay and insert it in your pasta machine fold last, a little pocket of air gets trapped in the fold.
Can you wedge clay on wood?
If you don’t want to use concrete for your clay wedging surface, you can opt for wood.
When should you wedge clay?
You will know fairly quickly if you are doing it correctly, your clay will have a spiral shape that looks like a shell. You should wedge at least 20 times when it’s fresh out of the bag. If it’s been recycled, you will need to wedge 100 times if not more depending on the condition of your clay.
What are the two main ways can wedge clay called?
So it’s important to learn how to wedge clay properly. There are various different ways to wedge clay— ram’s head, spiral wedging, and wire wedging to name a few.
What are the six stages of clay?
What are the clay stages?
- slip. a mixture of clay and water, the consistency of pudding.
- wet/plastic clay. new clay from the bag, very workable.
- leather hard. the clay has lost most moisture, but you can still carve into it.
- bone dry or greenware. totally dry clay, all moisture is gone, ready to fire.
- bisque.
What tool is used to cut the clay?
Mudtools Mudwires are used for cutting ware off the pottery wheel, and for slicing and cutting pieces of clay.
What are the 5 stages to creating a piece of pottery?
Terms in this set (5)
- make pot. when joining pieces of clay, scratch to attach, slip to be hip, smooth to groove.
- dry pot completely. this is called greenware.
- bisque fire the pot. this is called bisque ware.
- glaze. glaze your bisque ware and clean the bottom or it will stick to kiln shelf.
- glaze fire.
