QA

Quick Answer: Why Does My Top Load Washer Shake

Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Your washing machine might vibrate or shake during operation if the load inside the drum is unevenly distributed.

Why does my top load washer shake violently during spin cycle?

Some models of top-load washers use tub dampening straps to cushion the movement of the tub during the spin cycle. When the straps become stretched or damaged, the tub may contact the cabinet during the spin cycle, causing the washer to shake or move and creating a loud banging sound.

How do I stop my washing machine from shaking when spinning?

6 Tips to Stop Washing Machine Vibration Check that your loads are balanced. Check the the floor and machine are level. Ensure You Have a Sturdy Floor. Check Your Stacking Kit. Purchase Washing Machine Vibration Pads. Call in Some Reinforcement.

Why does my washing machine shake like crazy?

Washing machines often shake because the mass of clothes is distributed unevenly inside of them. Always make sure to spread out the clothes throughout your washer as you load it. If your washer continues to shake, remove some of your clothes. You may have simply overloaded it.

How do you balance a top loader washing machine?

Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

How much vibration is normal for a top load washer?

The short pause and vibration when the washer spin cycle reaches approximately 400 RPM is a normal. If the washer operates fine but vibrates, the leveling legs may have become loose.

Does a top load washer have shock absorbers?

Shock Absorber If you have been hearing a loud banging noise from your top-loading washing machine, and it is shaking and moving during the spin cycle, you’ll want to check on the shock absorbers, or struts. These go between the outer tub and the base frame to moderate the shaking of the tub during the spin cycle.

Is it normal for washing machine to shake?

Sometimes, your washer will vibrate and there’s nothing particularly wrong. Washers do tend to wiggle a small amount when the drum spins, especially during high-speed spin cycles. This can be considered normal, but it can also be unpleasantly noisy or shake nearby objects.

How do I stop my washing machine from jumping around?

How to Stop the Washing Machine from Walking Make sure the washing machine is level. Figure this out with a good old fashioned bubble level. Attach some non-slip, anti-vibration pads to the bottom of your washer’s legs. Take precautions to balance your washer load every time you do laundry.

How do I reset my top load washer?

Motor Reset Procedure: Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. The motor has now been reset and is ready for you to start a cycle.

How do I stop my Whirlpool washer from shaking?

If you notice your Whirlpool washer vibrates on spin cycle, the washer may not be level. Thankfully, washing machines use adjustable legs to help level it out. Solution: Use a level to check the washer. Adjust the legs accordingly by twisting the bottom “feet” of the washer.

Why is my Whirlpool washer shaking?

Common solutions for: Whirlpool Washer vibrating or shaking. One or more of the shock absorbers might be broken or worn out. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.

How do I know if my washing machine balance ring is bad?

The balance ring is filled with fluid. This fluid helps to dampen the vibration of the washer. If this fluid leaks out of the balance ring, the washer tub will vibrate and shake during operation. Check the balance to determine if is still filled with fluid.

Do all top load washers have suspension rods?

Most top-loader washers have suspension rods and dampening straps that control the vibration and movement of the tub. If the washer moves excessively during a spin cycle, with the tub becoming off-balance, the suspension rods or dampening straps are likely faulty.

How do I reset my Whirlpool top load washer?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

How do I reset my Fisher and Paykel top loader washing machine?

Factory Reset Turn the dial to select ‘Spin’. Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds will appear on the screen and the machine will beep. Your washer will now be reset to the default settings.

How do I reset my Maytag top load washer?

If you have a top-loader Maytag washer, you may be able to reset it by lifting the lid six times. However, you only have 12 seconds to do it. Unplug the washer for 1 minute. Reconnect the power and lift the lid and close it six times within a 12 second period.